Hi Alexandre, > -----Original Message----- > From: Alexandre Belloni [mailto:alexandre.belloni@xxxxxxxxxxxxxxxxxx] > Sent: 2016年6月9日 4:38 > To: Rob Herring <robh@xxxxxxxxxx> > Cc: Yang, Wenyou <Wenyou.Yang@xxxxxxxxx>; Alan Stern > <stern@xxxxxxxxxxxxxxxxxxx>; Greg Kroah-Hartman > <gregkh@xxxxxxxxxxxxxxxxxxx>; Ferre, Nicolas <Nicolas.FERRE@xxxxxxxxx>; > Pawel Moll <pawel.moll@xxxxxxx>; Mark Brown <broonie@xxxxxxxxxx>; Ian > Campbell <ijc+devicetree@xxxxxxxxxxxxxx>; Kumar Gala <galak@xxxxxxxxxxxxxx>; > linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx > Subject: Re: [PATCH v3 1/2] usb: ohci-at91: Forcibly suspend ports while USB > suspend > > On 08/06/2016 at 15:26:51 -0500, Rob Herring wrote : > > On Wed, Jun 08, 2016 at 12:15:10PM +0800, Wenyou Yang wrote: > > > In order to the save power consumption, as a workaround, suspend > > > forcibly the USB PORTA/B/C via set the SUSPEND_A/B/C bits of OHCI > > > Interrupt Configuration Register in the SFRs while OHCI USB suspend. > > > > > > This suspend operation must be done before the USB clock is > > > disabled, resume after the USB clock is enabled. > > > > > > Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx> > > > --- > > > > > > Changes in v3: > > > - Change the compatible description for more precise. > > > > > > Changes in v2: > > > - Add compatible to support forcibly suspend the ports. > > > - Add soc/at91/at91_sfr.h to accommodate the defines. > > > - Add error checking for .sfr_regmap. > > > - Remove unnecessary regmap_read() statement. > > > > > > .../devicetree/bindings/usb/atmel-usb.txt | 6 +- > > > drivers/usb/host/ohci-at91.c | 80 +++++++++++++++++++++- > > > include/soc/at91/at91_sfr.h | 29 ++++++++ > > > 3 files changed, 112 insertions(+), 3 deletions(-) create mode > > > 100644 include/soc/at91/at91_sfr.h > > > > > > diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt > > > b/Documentation/devicetree/bindings/usb/atmel-usb.txt > > > index 5883b73..888deaa 100644 > > > --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt > > > +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt > > > @@ -3,8 +3,10 @@ Atmel SOC USB controllers OHCI > > > > > > Required properties: > > > - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers > > > - used in host mode. > > > + - compatible: Should be one of the following > > > + "atmel,at91rm9200-ohci" for USB controllers used in host mode. > > > + "atmel,sama5d2-ohci" for USB controllers used in host mode > > > + on SAMA5D2 which can force to suspend. > > > > Guess I wasn't clear enough before. Drop "which can force to suspend". > > > > Well, my point is that we don't need a new compatible anyway. Could you give some advice?. > > -- > Alexandre Belloni, Free Electrons > Embedded Linux, Kernel and Android engineering http://free-electrons.com Best Regards, Wenyou Yang ?韬{.n?????%??檩??w?{.n???{炳???骅w* jg????????G??⒏ ⒎?:+v???????? ????＂??????
