Hi Frank, Am Dienstag, 7. Juni 2016, 17:15:52 schrieb Frank Wang: > The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy > IP block than rk3288 and before, and most of phy-related registers are > also different from the past, so a new phy driver is required necessarily. > > These series patches add phy-rockchip-inno-usb2.c and the corresponding > documentation. please see the replies on the v3 thread (regarding handling of multiple phy blocks) . Thanks Heiko > > Changes in v4: > - Used 'phy-supply' instead of 'vbus_*-supply'. > > Changes in v3: > - Supplemented some hardware-description into the devicetree bindings. > - Resolved the mapping defect between fixed value in driver and the > property in devicetree. > - Code cleanup. > > Changes in v2: > - Specified more hardware-description into the devicetree bindings. > - Optimized some process of driver. > > Frank Wang (2): > Documentation: bindings: add DT documentation for Rockchip USB2PHY > phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy > > .../bindings/phy/phy-rockchip-inno-usb2.txt | 62 ++ > drivers/phy/Kconfig | 7 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-rockchip-inno-usb2.c | 614 > ++++++++++++++++++++ 4 files changed, 684 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create > mode 100644 drivers/phy/phy-rockchip-inno-usb2.c -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
