On 02/06/16 14:52, Grygorii Strashko wrote:
> On 06/01/2016 10:46 AM, Roger Quadros wrote:
>> Implementations might use different IRQs for
>> host, gadget and OTG so use named interrupt resources
>> to allow Device tree to specify the 3 interrupts.
>>
>> Following are the interrupt names
>>
>> Peripheral Interrupt - peripheral
>> HOST Interrupt - host
>> OTG Interrupt - otg
>
> or "dwc_usb3"??
That is for backward compatibility only. I could explicitly
mention it in the next line.
>
>>
>> We still maintain backward compatibility for a single named
>> interrupt for all 3 interrupts (e.g. for dwc3-pci) and
>> single unnamed interrupt for all 3 interrupts (e.g. old DT).
>
> bindings
OK.
>
>>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>> ---
>> v9: rebased on top of balbi/testing/next
>>
>> drivers/usb/dwc3/core.c | 10 ----------
>> drivers/usb/dwc3/gadget.c | 20 ++++++++++++++++++--
>> drivers/usb/dwc3/host.c | 19 +++++++++++++++++++
>> 3 files changed, 37 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 9c4e1d8d..5cedf3d 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -843,16 +843,6 @@ static int dwc3_probe(struct platform_device *pdev)
>> dwc->mem = mem;
>> dwc->dev = dev;
>>
>> - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> - if (!res) {
>> - dev_err(dev, "missing IRQ\n");
>> - return -ENODEV;
>> - }
>> - dwc->xhci_resources[1].start = res->start;
>> - dwc->xhci_resources[1].end = res->end;
>> - dwc->xhci_resources[1].flags = res->flags;
>> - dwc->xhci_resources[1].name = res->name;
>> -
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> if (!res) {
>> dev_err(dev, "missing memory resource\n");
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index c37168d..c18c72f 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -1726,7 +1726,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
>> int ret = 0;
>> int irq;
>>
>> - irq = platform_get_irq(to_platform_device(dwc->dev), 0);
>> + irq = dwc->irq_gadget;
>> ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
>> IRQF_SHARED, "dwc3", dwc->ev_buf);
>> if (ret) {
>> @@ -1734,7 +1734,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
>> irq, ret);
>> goto err0;
>> }
>> - dwc->irq_gadget = irq;
>>
>> spin_lock_irqsave(&dwc->lock, flags);
>> if (dwc->gadget_driver) {
>> @@ -2853,6 +2852,23 @@ static irqreturn_t dwc3_interrupt(int irq, void *_evt)
>> int dwc3_gadget_init(struct dwc3 *dwc)
>> {
>> int ret;
>> + struct resource *res;
>> + struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
>> +
>> + dwc->irq_gadget = platform_get_irq_byname(dwc3_pdev, "peripheral");
>> + if (dwc->irq_gadget <= 0) {
>
> Is it expected to get -EPROBE_DEFER here?
Probably not as we don't have any chance of deferring probe here. We've already
probed successfully and are just turning on the gadget mode here.
>
>> + dwc->irq_gadget = platform_get_irq_byname(dwc3_pdev,
>> + "dwc_usb3");
>> + if (dwc->irq_gadget <= 0) {
>> + res = platform_get_resource(dwc3_pdev, IORESOURCE_IRQ,
>> + 0);
>
> It's better to use platform_get_irq().
OK.
>
>> + if (!res) {
>> + dev_err(dwc->dev, "missing peripheral IRQ\n");
>> + return -ENODEV;
>> + }
>> + dwc->irq_gadget = res->start;
>> + }
>> + }
>>
>> dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
>> &dwc->ctrl_req_addr, GFP_KERNEL);
>> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
>> index c679f63..f2b60a4 100644
>> --- a/drivers/usb/dwc3/host.c
>> +++ b/drivers/usb/dwc3/host.c
>> @@ -25,6 +25,25 @@ int dwc3_host_init(struct dwc3 *dwc)
>> struct platform_device *xhci;
>> struct usb_xhci_pdata pdata;
>> int ret;
>> + struct resource *res;
>> + struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
>> +
>> + res = platform_get_resource_byname(dwc3_pdev, IORESOURCE_IRQ, "host");
>> + if (!res) {
>> + res = platform_get_resource_byname(dwc3_pdev, IORESOURCE_IRQ,
>> + "dwc_usb3");
>> + if (!res) {
>> + res = platform_get_resource(dwc3_pdev, IORESOURCE_IRQ,
>> + 0);
>> + if (!res)
>
>> + return -ENOMEM;
>> + }
>> + }
>
> Is it expected to have more than one IRQ here?
No.
>
> if not - it will better to use platform_get_irq[_byname]().
OK.
>
>
>> +
>> + dwc->xhci_resources[1].start = res->start;
>> + dwc->xhci_resources[1].end = res->end;
>> + dwc->xhci_resources[1].flags = res->flags;
>> + dwc->xhci_resources[1].name = res->name;
>>
>> xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
>> if (!xhci) {
>>
>
>
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
