Hi Kishon & Heiko,
On 2016/6/7 15:45, Kishon Vijay Abraham I wrote:
Hi,
On Tuesday 07 June 2016 09:01 AM, Frank Wang wrote:
Hi Heiko,
On 2016/6/7 10:59, Frank Wang wrote:
Hi Heiko & Mark,
On 2016/6/6 20:33, Heiko Stübner wrote:
Am Montag, 6. Juni 2016, 12:27:54 schrieb Mark Rutland:
On Mon, Jun 06, 2016 at 05:20:03PM +0800, Frank Wang wrote:
Signed-off-by: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
---
Changes in v3:
- Added 'clocks' and 'clock-names' optional properties.
- Specified 'otg-port' and 'host-port' as the sub-node name.
Changes in v2:
- Changed vbus_host optional property from gpio to regulator.
- Specified vbus_otg-supply optional property.
- Specified otg_id and otg_bvalid property.
.../bindings/phy/phy-rockchip-inno-usb2.txt | 60
++++++++++++++++++++ 1 file changed, 60 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt>
diff --git
a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt new
file mode 100644
index 0000000..0b4bbbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -0,0 +1,60 @@
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible : should be one of the listed compatibles:
+ * "rockchip,rk3366-usb2phy"
+ * "rockchip,rk3399-usb2phy"
+ - #clock-cells : should be 0.
+ - clock-output-names : specify the 480m output clock name.
+
+Optional properties:
+ - clocks : phandle + phy specifier pair, for the input clock of phy.
+ - clock-names : input clock name of phy, must be "phyclk".
+ - vbus_host-supply : phandle to a regulator that supplies host vbus.
+ - vbus_otg-supply : phandle to a regulator that supplies otg vbus.
Nit: s/_/-/ here.
Something I only stumbled over yesterday for the first time on my rk3288-
popmetal: The phy subnodes seem to be able to use a generic phy-supply
property from inside the phy-core itself, see:
https://github.com/mmind/linux-rockchip/commit/93739f521fc65f44524b00c9aaf6db46bca94e02#diff-ddf3e45ebb753d6debf57022003a1a57R597
for my WIP code for that other board.
Ah, good comments! I will try later, if it is practicable, I shall correct it
into the next patches (patch v4).
I am sorry to tell you that seems unworkable, because we have two sub-nodes
(phy-ports) in one parent-node (phy),
what is more, the 'phy-supply' property can only put into parent-node, I
believe it can not be differentiated types of ports.
'phy-supply' is a property of the phy node and not the 'phy-provider' node. So
IMO this should work. What problem do you see?
Sorry, I think I must have made a wrong phandle of phy-port name in
*.dts before.
Yes, It works now, thanks for your reminding.
@Heiko,
I have just received your another mail, thanks again for your detail
explanation.
I will correct it in the next patches (patch v4).
BR.
Frank
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
