* Tony Lindgren <tony@xxxxxxxxxxx> [160519 08:28]:
> +static void dsps_musb_set_power(struct musb *musb, bool enabled)
> +{
> + struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
> + int err;
> +
> + if (enabled == glue->powered) {
> + dev_warn(musb->controller, "Power already %i\n",
> + glue->powered);
> + return;
> + }
> +
> + if (glue->powered) {
Heh this should be enabled not glue->powered here :) And enumeration
fails in peripheral mode if cable is connected on start up, that
needs more handling for the interrupt. Updated patch below.
Then this set_power should probably become something more generic
like:
void musb_set_cable_connected(struct musb *musb, bool connected);
That way the glue layers can call it after making sense of the
cable state.
Tony
8< ---------------
From: Tony Lindgren <tony@xxxxxxxxxxx>
Date: Thu, 19 May 2016 09:53:26 -0700
Subject: [PATCH] usb: musb: Add PM runtime support for dsps glue for PIO mode
This gets basic PM runtime working for dsps glue layer uwing
PIO mode.
For now, we must keep polling enabled as typically at least
one of the controllers has ID pin tied down. Later on we can
add support for remuxing USB data lines to GPIO mode to leave
out the polling where possible.
Note that this shuts down the device currently only with
CONFIG_MUSB_PIO_ONLY=y as cppi41 is a child of musb_am335x.c
and needs PM runtime fixed up first.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -103,6 +103,7 @@ struct dsps_musb_wrapper {
u32 usb_mask;
u32 usb_bitmap;
unsigned drvvbus:5;
+ unsigned connected:5;
unsigned txep_shift:5;
u32 txep_mask;
@@ -144,6 +145,7 @@ struct dsps_glue {
const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
struct timer_list timer; /* otg_workaround timer */
unsigned long last_timer; /* last timer data for each instance */
+ bool powered;
bool sw_babble_enabled;
struct dsps_context context;
@@ -250,6 +252,35 @@ static void dsps_musb_disable(struct musb *musb)
dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
}
+static void dsps_musb_set_power(struct musb *musb, bool enable)
+{
+ struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+ int err;
+
+ if (enable == glue->powered) {
+ dev_warn(musb->controller, "Power already %i\n",
+ glue->powered);
+ return;
+ }
+
+ if (enable) {
+ dev_dbg(musb->controller, "Enabling power\n");
+ err = pm_runtime_get_sync(musb->controller);
+ if (err < 0) {
+ dev_err(musb->controller,
+ "Could not pm_runtime_get: %i\n",
+ err);
+ return;
+ }
+ glue->powered = true;
+ } else {
+ dev_dbg(musb->controller, "Disabling power\n");
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
+ glue->powered = false;
+ }
+}
+
static void otg_timer(unsigned long _musb)
{
struct musb *musb = (void *)_musb;
@@ -260,6 +291,11 @@ static void otg_timer(unsigned long _musb)
u8 devctl;
unsigned long flags;
int skip_session = 0;
+ int err;
+
+ err = pm_runtime_get_sync(dev);
+ if (err < 0)
+ dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
/*
* We poll because DSPS IP's won't expose several OTG-critical
@@ -287,6 +323,7 @@ static void otg_timer(unsigned long _musb)
}
if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+ dsps_musb_set_power(musb, false);
mod_timer(&glue->timer, jiffies +
msecs_to_jiffies(wrp->poll_timeout));
break;
@@ -294,11 +331,18 @@ static void otg_timer(unsigned long _musb)
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
dsps_writel(musb->ctrl_base, wrp->coreintr_set,
MUSB_INTR_VBUSERROR << wrp->usb_shift);
+ dsps_musb_set_power(musb, false);
+ break;
+ case OTG_STATE_UNDEFINED:
break;
default:
+ dsps_musb_set_power(musb, true);
break;
}
spin_unlock_irqrestore(&musb->lock, flags);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
}
static irqreturn_t dsps_interrupt(int irq, void *hci)
@@ -362,7 +406,6 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
MUSB_HST_MODE(musb);
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
- del_timer(&glue->timer);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
@@ -379,12 +422,18 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
ret = IRQ_HANDLED;
}
+ if (usbintr & ((1 << wrp->connected) << wrp->usb_shift)) {
+ mod_timer(&glue->timer, jiffies +
+ msecs_to_jiffies(wrp->poll_timeout));
+ }
+
if (musb->int_tx || musb->int_rx || musb->int_usb)
ret |= musb_interrupt(musb);
- /* Poll for ID change in OTG port mode */
- if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
- musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+ /* Poll for ID change and device connect */
+ if (musb->xceiv->otg->state == OTG_STATE_A_IDLE ||
+ musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON ||
+ musb->xceiv->otg->state == OTG_STATE_B_IDLE)
mod_timer(&glue->timer, jiffies +
msecs_to_jiffies(wrp->poll_timeout));
out:
@@ -498,6 +547,7 @@ static int dsps_musb_exit(struct musb *musb)
phy_power_off(musb->phy);
phy_exit(musb->phy);
debugfs_remove_recursive(glue->dbgfs_root);
+ dsps_musb_set_power(musb, false);
return 0;
}
@@ -808,6 +858,8 @@ static int dsps_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, glue);
pm_runtime_enable(&pdev->dev);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 500);
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
@@ -819,11 +871,15 @@ static int dsps_probe(struct platform_device *pdev)
if (ret)
goto err3;
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
err3:
- pm_runtime_put(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
err2:
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
@@ -835,7 +891,8 @@ static int dsps_remove(struct platform_device *pdev)
platform_device_unregister(glue->musb);
/* disable usbss clocks */
- pm_runtime_put(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
@@ -863,6 +920,7 @@ static const struct dsps_musb_wrapper am33xx_driver_data = {
.usb_mask = 0x1ff,
.usb_bitmap = (0x1ff << 0),
.drvvbus = 8,
+ .connected = 4,
.txep_shift = 0,
.txep_mask = 0xffff,
.txep_bitmap = (0xffff << 0),
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
