Re: [PATCHv2 00/15] Get MUSB PM runtime working again

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Bin Liu <b-liu@xxxxxx> [160517 14:17]:
> Hi Tony,
> 
> On Wed, May 11, 2016 at 05:53:01PM -0700, Tony Lindgren wrote:
> > Hi all,
> > 
> > Here's the whole series reposted with a bunch of additional changes.
> > It seems to now properly work with with multiple phy cable status
> > events, and should work for Ivaylo on n900 too.
> > 
> > Please re-review and re-test.
> 
> While trying to test this patch set, I just found that commit 56f487c (PM
> / Runtime: Update last_busy in rpm_resume) breaks dsps glue (TI am335x
> device). Do you have an am335x board with has otg port on it to take a
> look at this problem? The only board I know of which has an otg port is
> TI am335x GP evm.

Hmm sure I can take a lok. Chances are that just doing a change for
s/pm_runtime_put/pm_runtime_put_sync/ will fix it. I'm wondering why
it breaks though as dsps glue does not use autosuspend? It could also
be a case where the parent and child PM runtime use counts get out
of sync?

BTW, I did give my series a quick try here on j5eco-evm and that behaved
for peripheral and host enumeration. It's pretty much the same setup as
on am335x I believe.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux