Hi,
On 16/05/16 10:02, Peter Chen wrote:
> On Fri, May 13, 2016 at 01:03:27PM +0300, Roger Quadros wrote:
>> +
>> +static int usb_gadget_connect_control(struct usb_gadget *gadget, bool connect)
>> +{
>> + struct usb_udc *udc;
>> +
>> + mutex_lock(&udc_lock);
>> + udc = usb_gadget_to_udc(gadget);
>> + if (!udc) {
>> + dev_err(gadget->dev.parent, "%s: gadget not registered.\n",
>> + __func__);
>> + mutex_unlock(&udc_lock);
>> + return -EINVAL;
>> + }
>> +
>> + if (connect) {
>> + if (!gadget->connected)
>> + usb_gadget_connect(udc->gadget);
>> + } else {
>> + if (gadget->connected) {
>> + usb_gadget_disconnect(udc->gadget);
>> + udc->driver->disconnect(udc->gadget);
>> + }
>> + }
>> +
>> + mutex_unlock(&udc_lock);
>> +
>> + return 0;
>> +}
>> +
>
> Since this is called for vbus interrupt, why not using
> usb_udc_vbus_handler directly, and call udc->driver->disconnect
> at usb_gadget_stop.
We can't assume that this is always called for vbus interrupt so
I decided not to call usb_udc_vbus_handler.
udc->vbus is really pointless for us. We keep vbus states in our
state machine and leave udc->vbus as ture always.
Why do you want to move udc->driver->disconnect() to stop?
If USB controller disconnected from bus then the gadget driver
must be notified about the disconnect immediately. The controller
may or may not be stopped by the core.
>
>> return 0;
>> @@ -660,9 +830,15 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
>> return -EOPNOTSUPP;
>> }
>>
>> + /* In OTG mode we don't support softconnect, but b_bus_req */
>> + if (udc->gadget->otg_dev) {
>> + dev_err(dev, "soft-connect not supported in OTG mode\n");
>> + return -EOPNOTSUPP;
>> + }
>> +
>
> The soft-connect can be supported at dual-role mode currently, we can
> use b_bus_req entry once it is implemented later.
Soft-connect should be done via sysfs handling within the OTG core.
This can be added later. I don't want anything outside the OTG core
to handle soft-connect behaviour as it will be hard to keep things
in sync.
I can update the comment to something like this.
/* In OTG/dual-role mode, soft-connect should be handled by OTG core */
>
>> if (sysfs_streq(buf, "connect")) {
>> usb_gadget_udc_start(udc);
>> - usb_gadget_connect(udc->gadget);
>> + usb_udc_connect_control(udc);
>
> This line seems to be not related with this patch.
>
Right. I'll remove it.
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
