On Fri, May 13, 2016 at 01:03:27PM +0300, Roger Quadros wrote:
> +
> +static int usb_gadget_connect_control(struct usb_gadget *gadget, bool connect)
> +{
> + struct usb_udc *udc;
> +
> + mutex_lock(&udc_lock);
> + udc = usb_gadget_to_udc(gadget);
> + if (!udc) {
> + dev_err(gadget->dev.parent, "%s: gadget not registered.\n",
> + __func__);
> + mutex_unlock(&udc_lock);
> + return -EINVAL;
> + }
> +
> + if (connect) {
> + if (!gadget->connected)
> + usb_gadget_connect(udc->gadget);
> + } else {
> + if (gadget->connected) {
> + usb_gadget_disconnect(udc->gadget);
> + udc->driver->disconnect(udc->gadget);
> + }
> + }
> +
> + mutex_unlock(&udc_lock);
> +
> + return 0;
> +}
> +
Since this is called for vbus interrupt, why not using
usb_udc_vbus_handler directly, and call udc->driver->disconnect
at usb_gadget_stop.
> return 0;
> @@ -660,9 +830,15 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
> return -EOPNOTSUPP;
> }
>
> + /* In OTG mode we don't support softconnect, but b_bus_req */
> + if (udc->gadget->otg_dev) {
> + dev_err(dev, "soft-connect not supported in OTG mode\n");
> + return -EOPNOTSUPP;
> + }
> +
The soft-connect can be supported at dual-role mode currently, we can
use b_bus_req entry once it is implemented later.
> if (sysfs_streq(buf, "connect")) {
> usb_gadget_udc_start(udc);
> - usb_gadget_connect(udc->gadget);
> + usb_udc_connect_control(udc);
This line seems to be not related with this patch.
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
