On 5/9/2016 3:36 AM, Arnd Bergmann wrote: > On Monday 09 May 2016 10:23:22 Benjamin Herrenschmidt wrote: >> On Sun, 2016-05-08 at 13:44 +0200, Christian Lamparter wrote: >>> On Sunday, May 08, 2016 08:40:55 PM Benjamin Herrenschmidt wrote: >>>> >>>> On Sun, 2016-05-08 at 00:54 +0200, Christian Lamparter via Linuxppc-dev >>>> wrote: >>>>> >>>>> I've been looking in getting the MyBook Live Duo's USB OTG port >>>>> to function. The SoC is a APM82181. Which has a PowerPC 464 core >>>>> and related to the supported canyonlands architecture in >>>>> arch/powerpc/. >>>>> >>>>> Currently in -next the dwc2 module doesn't load: >>>> Smells like the APM implementation is little endian. You might need to >>>> use a flag to indicate what endian to use instead and set it >>>> appropriately based on some DT properties. >>> I tried. As per common-properties[0], I added little-endian; but it has no >>> effect. I looked in dwc2_driver_probe and found no way of specifying the >>> endian of the device. It all comes down to the dwc2_readl & dwc2_writel >>> accessors. These - sadly - have been hardwired to use __raw_readl and >>> __raw_writel. So, it's always "native-endian". While common-properties >>> says little-endian should be preferred. >> >> Right, I meant, you should produce a patch adding a runtime test inside >> those functions based on a device-tree property, a bit like we do for >> some of the HCDs like OHCI, EHCI etc... >> >> > > The patch that caused the problem had multiple issues: > > - it broke big-endian ARM kernels: any machine that was working > correctly with a little-endian kernel is no longer using byteswaps > on big-endian kernels, which clearly breaks them. I'm a bit confused about how this is supposed to work. My understanding was that the readl() and writel() are defined as little endian. So byte-swapping was performed if the architecture is big endian. And the raw versions never swapped, always using the "native" endianness. dwc2 is always treating the result of readl/writel as if it was read in native endian. So it needs to read the registers in big-endian on big-endian systems. This was the premise on which this patch was made. So for big endian systems, isn't what we want is to read in big-endian without any byteswapping to little-endian? But your saying this breaks big-endian ARM systems as well. Am I missing something? The rest of the feedback makes sense. Just confused about this bit. Regards, John -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
