> -----Original Message----- > From: Konstantin Shkolnyy > Sent: Wednesday, March 23, 2016 11:26 > To: 'Valentin Yakovenkov'; linux-usb@xxxxxxxxxxxxxxx > Subject: RE: [PATCH] Add DCD line support to CP210x driver > > > -----Original Message----- > > From: linux-usb-owner@xxxxxxxxxxxxxxx [mailto:linux-usb- > > owner@xxxxxxxxxxxxxxx] On Behalf Of Valentin Yakovenkov > > Sent: Tuesday, March 22, 2016 11:12 > > To: linux-usb@xxxxxxxxxxxxxxx > > Subject: [PATCH] Add DCD line support to CP210x driver > [...] > > > static struct usb_serial_driver * const serial_drivers[] = { > > @@ -460,6 +471,11 @@ static int cp210x_open(struct tty_struct *tty, struct > > usb_serial_port *port) > > { > > int result; > > > > + struct usb_serial *serial = port->serial; > > + struct cp210x_serial_private *spriv = usb_get_serial_data(serial); > > + > > + spriv->cp210x_tstate = CP210X_STATE_IDLE; > > + > > result = cp210x_set_config_single(port, CP210X_IFC_ENABLE, > > > > UART_ENABLE); > > if (result) { > > @@ -474,6 +490,15 @@ static int cp210x_open(struct tty_struct *tty, struct > > usb_serial_port *port) > > if (tty) > > cp210x_change_speed(tty, port, NULL); > > > > + /* Enable events embedding to data stream */ > > + result = cp210x_set_config_single(port, CP210X_EMBED_EVENTS, > > + > > CP210X_ESCCHAR); > > + if (result) { > > + dev_err(&port->dev, "%s - Unable to enable event > > embedding on UART\n", > > + __func__); > > + return result; > > + } > > + > > This unconditionally enables the behavior every time the device is opened. > Instead it needs to be enabled by the application explicitly, otherwise it'll > hurt people who don't except it. > I can see now that I'm wrong here. Sorry, never mind. ��.n��������+%������w��{.n�����{���)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
