From: Inaky Perez-Gonzalez <inaky@xxxxxxxxxxxxxxx>
This implements the backends for the generic driver (i2400m) to be
able to load firmware to the SDIO device.
Signed-off-by: Inaky Perez-Gonzalez <inaky@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/net/wimax/i2400m/sdio-fw.c | 224 ++++++++++++++++++++++++++++++++++++
1 files changed, 224 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wimax/i2400m/sdio-fw.c
diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c
new file mode 100644
index 0000000..3487205
--- /dev/null
+++ b/drivers/net/wimax/i2400m/sdio-fw.c
@@ -0,0 +1,224 @@
+/*
+ * Intel Wireless WiMAX Connection 2400m
+ * Firmware uploader's SDIO specifics
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <linux-wimax@xxxxxxxxx>
+ * Yanir Lubetkin <yanirx.lubetkin@xxxxxxxxx>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@xxxxxxxxx>
+ * - Initial implementation
+ *
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@xxxxxxxxx>
+ * - Bus generic/specific split for USB
+ *
+ * Dirk Brandewie <dirk.j.brandewie@xxxxxxxxx>
+ * - Initial implementation for SDIO
+ *
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@xxxxxxxxx>
+ * - SDIO rehash for changes in the bus-driver model
+ *
+ * THE PROCEDURE
+ *
+ * See fw.c for the generic description of this procedure.
+ *
+ * This file implements only the SDIO specifics. It boils down to how
+ * to send a command and waiting for an acknowledgement from the
+ * device. We do polled reads.
+ *
+ * COMMAND EXECUTION
+ *
+ * THe generic firmware upload code will call i2400m_bus_bm_cmd_send()
+ * to send commands.
+ *
+ * The SDIO devices expects things in 256 byte blocks, so it will pad
+ * it, compute the checksum (if needed) and pass it to SDIO.
+ *
+ * ACK RECEPTION
+ *
+ * This works in polling mode -- the fw loader says when to wait for
+ * data and for that it calls i2400ms_bus_bm_wait_for_ack().
+ *
+ * This will poll the device for data until it is received. We need to
+ * receive at least as much bytes as where asked for (although it'll
+ * always be a multiple of 256 bytes).
+ */
+#include <linux/mmc/sdio_func.h>
+#include "i2400m-sdio.h"
+
+
+#define D_SUBMODULE fw
+#include "sdio-debug-levels.h"
+
+/*
+ * Send a boot-mode command to the SDIO function
+ *
+ * We use a bounce buffer (i2400m->bm_cmd_buf) because we need to
+ * touch the header if the RAW flag is not set.
+ *
+ * @flags: pass thru from i2400m_bm_cmd()
+ * @return: cmd_size if ok, < 0 errno code on error.
+ *
+ * Note the command is padded to the SDIO block size for the device.
+ */
+ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *i2400m,
+ const struct i2400m_bootrom_header *_cmd,
+ size_t cmd_size, int flags)
+{
+ ssize_t result;
+ struct device *dev = i2400m_dev(i2400m);
+ struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
+ int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd);
+ struct i2400m_bootrom_header *cmd;
+ /* SDIO restriction */
+ size_t cmd_size_a = ALIGN(cmd_size, I2400MS_BLK_SIZE);
+
+ d_fnstart(5, dev, "(i2400m %p cmd %p size %zu)\n",
+ i2400m, _cmd, cmd_size);
+ result = -E2BIG;
+ if (cmd_size > I2400M_BM_CMD_BUF_SIZE)
+ goto error_too_big;
+
+ memcpy(i2400m->bm_cmd_buf, _cmd, cmd_size); /* Prep command */
+ cmd = i2400m->bm_cmd_buf;
+ if (cmd_size_a > cmd_size) /* Zero pad space */
+ memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size);
+ if ((flags & I2400M_BM_CMD_RAW) == 0) {
+ if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0))
+ dev_warn(dev, "SW BUG: response_required == 0\n");
+ i2400m_bm_cmd_prepare(cmd);
+ }
+ d_printf(4, dev, "BM cmd %d: %zu bytes (%zu padded)\n",
+ opcode, cmd_size, cmd_size_a);
+ d_dump(5, dev, cmd, cmd_size);
+
+ sdio_claim_host(i2400ms->func); /* Send & check */
+ result = sdio_memcpy_toio(i2400ms->func, I2400MS_DATA_ADDR,
+ i2400m->bm_cmd_buf, cmd_size_a);
+ sdio_release_host(i2400ms->func);
+ if (result < 0) {
+ dev_err(dev, "BM cmd %d: cannot send: %ld\n",
+ opcode, (long) result);
+ goto error_cmd_send;
+ }
+ result = cmd_size;
+error_cmd_send:
+error_too_big:
+ d_fnend(5, dev, "(i2400m %p cmd %p size %zu) = %d\n",
+ i2400m, _cmd, cmd_size, (int) result);
+ return result;
+}
+
+
+/*
+ * Read an ack from the device's boot-mode (polling)
+ *
+ * @i2400m:
+ * @_ack: pointer to where to store the read data
+ * @ack_size: how many bytes we should read
+ *
+ * Returns: < 0 errno code on error; otherwise, amount of received bytes.
+ *
+ * The ACK for a BM command is always at least sizeof(*ack) bytes, so
+ * check for that. We don't need to check for device reboots
+ *
+ * NOTE: We do an artificial timeout of 1 sec over the SDIO timeout;
+ * this way we have control over it...there is no way that I know
+ * of setting an SDIO transaction timeout.
+ */
+ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m,
+ struct i2400m_bootrom_header *ack,
+ size_t ack_size)
+{
+ int result;
+ ssize_t rx_size;
+ u64 timeout;
+ struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
+ struct sdio_func *func = i2400ms->func;
+ struct device *dev = &func->dev;
+
+ BUG_ON(sizeof(*ack) > ack_size);
+
+ d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
+ i2400m, ack, ack_size);
+
+ timeout = get_jiffies_64() + 2 * HZ;
+ sdio_claim_host(func);
+ while (1) {
+ if (time_after64(get_jiffies_64(), timeout)) {
+ rx_size = -ETIMEDOUT;
+ dev_err(dev, "timeout waiting for ack data\n");
+ goto error_timedout;
+ }
+
+ /* Find the RX size, check if it fits or not -- it if
+ * doesn't fit, fail, as we have no way to dispose of
+ * the extra data. */
+ rx_size = __i2400ms_rx_get_size(i2400ms);
+ if (rx_size < 0)
+ goto error_rx_get_size;
+ result = -ENOSPC; /* Check it fits */
+ if (rx_size < sizeof(*ack)) {
+ rx_size = -EIO;
+ dev_err(dev, "HW BUG? received is too small (%zu vs "
+ "%zu needed)\n", sizeof(*ack), rx_size);
+ goto error_too_small;
+ }
+ if (rx_size > I2400M_BM_ACK_BUF_SIZE) {
+ dev_err(dev, "SW BUG? BM_ACK_BUF is too small (%u vs "
+ "%zu needed)\n", I2400M_BM_ACK_BUF_SIZE,
+ rx_size);
+ goto error_too_small;
+ }
+
+ /* Read it */
+ result = sdio_memcpy_fromio(func, i2400m->bm_ack_buf,
+ I2400MS_DATA_ADDR, rx_size);
+ if (result == -ETIMEDOUT || result == -ETIME)
+ continue;
+ if (result < 0) {
+ dev_err(dev, "BM SDIO receive (%zu B) failed: %d\n",
+ rx_size, result);
+ goto error_read;
+ } else
+ break;
+ }
+ rx_size = min((ssize_t)ack_size, rx_size);
+ memcpy(ack, i2400m->bm_ack_buf, rx_size);
+error_read:
+error_too_small:
+error_rx_get_size:
+error_timedout:
+ sdio_release_host(func);
+ d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %ld\n",
+ i2400m, ack, ack_size, (long) rx_size);
+ return rx_size;
+}
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
