On 3/17/2016 5:26 AM, David Lechner wrote:
This is a new phy driver for the SoC USB controllers on the TI DA8XX
DA8xx, please.
family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
The USB 2.0 PHY also allows overriding the VBUS and ID pins.
Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
[...]
diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
new file mode 100644
index 0000000..93a5f4d
--- /dev/null
+++ b/drivers/phy/phy-da8xx-usb.c
@@ -0,0 +1,295 @@
[...]
+static inline u32 da8xx_usbphy_readl(void __iomem *base)
+{
+ return readl(base);
+}
+
+static inline void da8xx_usbphy_writel(void __iomem *base, u32 value)
+{
+ writel(value, base);
Why wrap them at all?
+}
+
+static int da8xx_usb11_phy_init(struct phy *phy)
+{
+ struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
+ int ret;
+ u32 val;
+
+ ret = clk_prepare_enable(d_phy->usb11_clk);
+ if (ret)
+ return ret;
+
+ val = da8xx_usbphy_readl(d_phy->phy_ctrl);
+ val |= USB1SUSPENDM;
+ da8xx_usbphy_writel(d_phy->phy_ctrl, val);
Hum, I'd think this needs to be done in the power_on() method...
+
+ return 0;
+}
+
+static int da8xx_usb11_phy_shutdown(struct phy *phy)
+{
+ struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
+ u32 val;
+
+ val = da8xx_usbphy_readl(d_phy->phy_ctrl);
+ val &= ~USB1SUSPENDM;
+ da8xx_usbphy_writel(d_phy->phy_ctrl, val);
And this in power_off()...
+
+ clk_disable_unprepare(d_phy->usb11_clk);
+
+ return 0;
+}
+
+static const struct phy_ops da8xx_usb11_phy_ops = {
+ .power_on = da8xx_usb11_phy_init,
+ .power_off = da8xx_usb11_phy_shutdown,
Aha, it's just that the names don't match...
Please call the implementations da8xx_usb11_phy_power_{on|off}().
The same with USB 2.0 PHY.
[...]
Looks good otherwise on my superficial review. :-)
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
