OK, ready for round two. I've added a new callback in the davinci clocks so that they can properly handle clock muxing. The clock functions are pretty much the same as in the previous patch set other than clk_set_parent() now works. The next new thing is a phy driver for the CFGCHIP2 register that controls the SoC USB PHY (both USB 1.1 and USB 2.0). The ohci and musb drivers have been updated to use this new phy driver. David Lechner (10): ARM: davinci: add set_parent callback for mux clocks ARM: davinci: da850: use clk->set_parent for async3 ARM: davinci: da8xx: add usb phy clocks dt-bindings: Add bindings for phy-da8xx-usb phy: da8xx-usb: new driver for DA8XX SoC USB PHY ARM: davinci: da8xx: Add USB PHY platform declaration ARM: dt: da850: Add usb phy node usb: ohci-da8xx: Remove code that references mach usb: musb: da8xx: Use devm in probe usb: musb: da8xx: Remove mach code Petr Kulhavy (1): ARM: davinci: defined missing CFGCHIP2_REFFREQ_* macros for MUSB PHY .../devicetree/bindings/phy/phy-da8xx-usb.txt | 34 +++ arch/arm/boot/dts/da850.dtsi | 6 + arch/arm/mach-davinci/board-da830-evm.c | 12 - arch/arm/mach-davinci/board-omapl138-hawk.c | 7 - arch/arm/mach-davinci/clock.c | 17 +- arch/arm/mach-davinci/clock.h | 1 + arch/arm/mach-davinci/da830.c | 143 ++++++++++ arch/arm/mach-davinci/da850.c | 231 ++++++++++++---- arch/arm/mach-davinci/include/mach/da8xx.h | 1 + arch/arm/mach-davinci/usb.c | 24 +- drivers/phy/Kconfig | 9 + drivers/phy/Makefile | 1 + drivers/phy/phy-da8xx-usb.c | 295 +++++++++++++++++++++ drivers/usb/host/ohci-da8xx.c | 90 +++---- drivers/usb/musb/da8xx.c | 150 +++-------- include/linux/platform_data/usb-davinci.h | 6 + 16 files changed, 799 insertions(+), 228 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt create mode 100644 drivers/phy/phy-da8xx-usb.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
