Wrong link address, sry. The script has following content: http://pastebin.com/isyaWeVP Best regards, PM On Thu, Mar 10, 2016 at 4:32 PM, Peter Maciejko <corsseir@xxxxxxxxx> wrote: > Guys, I guess I found workaround. > > System: Fedora 23. > Kernel: 4.4.3-300 (Fedora repo). > > Firstable, I am not be able to shutdown my computer without quirks. I > have to add: > > xhci_hcd.quirks=270336 (XHCI_SPURIOUS_WAKEUP and XHCI_SPURIOUS_REBOOT quirks) > > or > > xhci_hcd.quirks=262144 (XHCI_SPURIOUS_WAKEUP) > > to GRUB_CMDLINE_LINUX. > > xhci_hcd.quirks=8192 (XHCI_SPURIOUS_REBOOT quirks) does not work. > > But this is not enough, I had to prepare script that I put into > /lib/systemd/system-shutdown/ as unbind-xhci-devices.shutdown. Power > off works fine now, but I still think that this is serious bug, which > should be fixed as fast as possible. Power off does not work if I try > use only quirks or only script. It does not matter which quirks(270336 > or 262144) I use with my script, power off works fine. BTW, after this > trick, mouse clicking no longer initiate boot process until monitor is > enabled after proper shutdown, as well. > > The script has following content: http://pastebin.com/QNGVXHkP > > Do you need anything else, except lsusb, lspci and lsusb -t that I > have already sent to you? > > Best regards, > PM > > On Wed, Mar 9, 2016 at 9:09 PM, Peter Maciejko <corsseir@xxxxxxxxx> wrote: >> The problem is a bit complicated, that is why I put a video containing >> a description of the problem on kernel bug tracker. >> >> Motherboard: ASRock H87 PRO 4 >> Processor: Intel Core i5 4570 Haswell >> >> If USB 3.0 controller is enabled in UEFI Setup then three, maybe four >> seconds after shutdown, my computer starts boot process by itself. >> After reboot, which is initiated by me through command line or >> graphical environment - it doesnt matter - poweroff works fine but >> only once. Besides, even if poweroff works fine, until my monitor is >> enabled after proper shutdown, I can start boot process by clicking >> left mouse button/right mouse button/scroll. If I disable my monitor >> and then enable it again, then obviously I cant boot computer by >> clicking. All "Power on" options are disabled in UEFI. >> >> If USB 3.0 controller is disabled in UEFI Setup then poweroff works >> fine, but after proper shutdown, until monitor is enabled, I can light >> up my mouse's and keyboard's leds by clicking same as I described >> above. >> >> >> My mouse and keyboard are connected to the computer through monitor's USB ports. >> >> >> Monitor: Dell U2414H >> Mouse: SteelSeries Rival >> Keyboard: CM Storm Quickfire Rapid-I >> >> Sry for my bad english, I hope you will understand me, if not - then >> watch movie pls. >> >> Link to the movie: >> https://www.dropbox.com/s/isr9i0yojgnlb6n/20160309_133125.mp4?dl=0 >> lsusb: http://pastebin.com/uhGAnCLU >> lsusb -t: http://pastebin.com/iY1HZrER >> lspci: http://pastebin.com/phz6if1U >> >> I have tried: >> xhci_hcd.quirks=270336 //XHCI_SPURIOUS_WAKEUP and XHCI_SPURIOUS_REBOOT >> xhci_hcd.quirks=8192 //XHCI_SPURIOUS_REBOOT >> xhci_hcd.quirks=262144 //XHCI_SPURIOUS_WAKEUP >> >> Nothing helped, computer keeps rebooting after shutdown. I cant >> remember when my rig works fine last time - it is very frustrating, I >> am a little bit tired of this :) >> I have now Fedora 23 with 4.4.3 kernel, but I have also tried >> branded/vanilla 4.4.4 and obviously it didnt help. >> On Ubuntu 14.04 and the latest 3.16, bug persists too - my girlfriend >> has same rig and same issue. >> >> There is two situations when poweroff works ALMOST fine: >> 1. Keyboard/Remote Power On and Mouse Power On is enabled in uefi, but >> then poweroff process hangs for few seconds and I can boot computer by >> clicking, until monitor is enabled after shutdown. >> 2. USB 3.0 Controller is disabled (still can light up >> keyboard's/mouse's leds until monitor is enabled after shutdown). >> >> Best regards guys and thanks for your effort, >> PM >> >> On Wed, Mar 9, 2016 at 6:40 PM, Felipe Ferreri Tonello >> <eu@xxxxxxxxxxxxxxxxx> wrote: >>> Hi, >>> >>> On 09/03/16 17:12, Greg KH wrote: >>>> On Wed, Mar 09, 2016 at 05:47:00PM +0100, Peter Maciejko wrote: >>>>> https://bugzilla.kernel.org/show_bug.cgi?id=114111 >>>>> >>>>> Bug ID: 114111 >>>>> Summary: Reboot after shutdown, when USB 3.0 controller is enabled >>>> >>>> Please send us the full details so we don't have to dig them out on the >>>> website... >>> >>> There is absolutely no description of the bug besides the Summary, which >>> by itself is not saying much. >>> >>> Peter, can you describe exactly was is going on? >>> >>> -- >>> Felipe -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
