RE: [PATCH] usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Felipe,

> Sent: Wednesday, March 09, 2016 8:00 PM
< snip >
> >> On xHCI controllers of R-Car Gen2 and Gen3, the AC64 bit (bit 0) of
> >> HCCPARAMS1 is set to 1. However, these SoCs don't support 64-bit address
> >> memory pointers. So, this driver should call dma_set_coherent_mask(dev,
> >> DMA_BIT_MASK(32)) in xhci_gen_setup(). Otherwise, the xHCI controller
> >> will be died after a usb device is connected if R-Car Gen2/3 run on above
> >> 4GB physical memory environment.
> >>
> >> This patch adds clearing the AC64 bit of xhci->hcc_params in the
> >> xhci_plat_quirks() to fix the issue.
> >>
> >> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> >> ---
> >>  drivers/usb/host/xhci-plat.c | 13 +++++++++++++
> >>  1 file changed, 13 insertions(+)
> >>
> >> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> >> index d39d6bf..047fb6a 100644
> >> --- a/drivers/usb/host/xhci-plat.c
> >> +++ b/drivers/usb/host/xhci-plat.c
> >> @@ -39,12 +39,25 @@ static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
> >>
> >>  static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
> >>  {
> >> +	struct usb_hcd *hcd = xhci_to_hcd(xhci);
> >> +
> >>  	/*
> >>  	 * As of now platform drivers don't provide MSI support so we ensure
> >>  	 * here that the generic code does not try to make a pci_dev from our
> >>  	 * dev struct in order to setup MSI
> >>  	 */
> >>  	xhci->quirks |= XHCI_PLAT;
> >> +
> >> +	/*
> >> +	 * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
> >> +	 * to 1. However, these SoCs don't support 64-bit address memory
> >> +	 * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
> >> +	 * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
> >> +	 * xhci_gen_setup().
> >> +	 */
> >> +	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
> >> +	    xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3))
> >> +		xhci->hcc_params &= ~BIT(0);	/* clear HCC_64BIT_ADDR
> >>  */
> 
> Mathias, of course, has the final saying; but I feel that, just like any
> other quirk, this should be setting a flag in xhci->quirks and xhci core
> would clear hcc_params. The reason is that if we ever need this on some
> PCIe card, we won't have to shuffle code around.

Thank you for the comment. I agree with you.
So, I will make such a code and send v2 patch tomorrow.

Best regards,
Yoshihiro Shimoda

> --
> balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux