RE: [PATCH] usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mathias,

Would you review this patch?
This patch could be applied into the latest usb.git / usb-next branch.

Best regards,
Yoshihiro Shimoda

> -----Original Message-----
> From: Yoshihiro Shimoda
> Sent: Tuesday, February 16, 2016 12:26 PM
> To: mathias.nyman@xxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx
> Cc: linux-usb@xxxxxxxxxxxxxxx; linux-renesas-soc@xxxxxxxxxxxxxxx; Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Subject: [PATCH] usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys
> 
> On xHCI controllers of R-Car Gen2 and Gen3, the AC64 bit (bit 0) of
> HCCPARAMS1 is set to 1. However, these SoCs don't support 64-bit address
> memory pointers. So, this driver should call dma_set_coherent_mask(dev,
> DMA_BIT_MASK(32)) in xhci_gen_setup(). Otherwise, the xHCI controller
> will be died after a usb device is connected if R-Car Gen2/3 run on above
> 4GB physical memory environment.
> 
> This patch adds clearing the AC64 bit of xhci->hcc_params in the
> xhci_plat_quirks() to fix the issue.
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> ---
>  drivers/usb/host/xhci-plat.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index d39d6bf..047fb6a 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -39,12 +39,25 @@ static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
> 
>  static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
>  {
> +	struct usb_hcd *hcd = xhci_to_hcd(xhci);
> +
>  	/*
>  	 * As of now platform drivers don't provide MSI support so we ensure
>  	 * here that the generic code does not try to make a pci_dev from our
>  	 * dev struct in order to setup MSI
>  	 */
>  	xhci->quirks |= XHCI_PLAT;
> +
> +	/*
> +	 * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
> +	 * to 1. However, these SoCs don't support 64-bit address memory
> +	 * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
> +	 * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
> +	 * xhci_gen_setup().
> +	 */
> +	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
> +	    xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3))
> +		xhci->hcc_params &= ~BIT(0);	/* clear HCC_64BIT_ADDR */
>  }
> 
>  /* called during probe() after chip reset completes */
> --
> 1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux