Re: [PATCH] usb: musb: host: Fix NULL pointer dereference in SMP environment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Liu Xiang <liu.xiang6@xxxxxxxxxx> writes:
> In multi-core SoC, if enable USB endpoint/transmit urb/disable 
> USB endpoint repeatedly,it can cause a NULL pointer dereference bug:
>
> Unable to handle kernel NULL pointer dereference at virtual address 00000010
> pgd = d3eb4000
> [00000010] *pgd=00000000
> Internal error: Oops: 5 [#1] PREEMPT SMP
> Pid: 1017, comm:          mediaserver
> CPU: 0    Not tainted  (3.0.101-ZXICTOS_V2.00.20_P2B4_ZTE_ZX296700_ASIC+ #2)
> PC is at musb_h_disable+0xfc/0x15c
> LR is at musb_h_disable+0xfc/0x15c
> pc : [<c0353de8>]    lr : [<c0353de8>]    psr: 60070093
> sp : d3e5bc80  ip : 00000027  fp : d3e5bca4
> r10: 00000000  r9 : ffffff94  r8 : 00000080
> r7 : 60070013  r6 : d45900f0  r5 : d4717720  r4 : cee2d860
> r3 : 00000000  r2 : c0875628  r1 : d3e5bbc0  r0 : 0000002a
> Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
> Control: 18c53c7d  Table: b3eb404a  DAC: 00000015
> [<c00519d0>] (__dabt_svc+0x70/0xa0) from [<c0353de8>] (musb_h_disable+0xfc/0x15c)
> [<c0353de8>] (musb_h_disable+0xfc/0x15c) from [<c032f160>] (usb_hcd_disable_endpoint+0x3c/0x44)
> [<c032f160>] (usb_hcd_disable_endpoint+0x3c/0x44) from [<c0331504>] (usb_disable_endpoint+0x64/0x7c)
> [<c0331504>] (usb_disable_endpoint+0x64/0x7c) from [<c0331564>] (usb_disable_interface+0x48/0x58)
> [<c0331564>] (usb_disable_interface+0x48/0x58) from [<c0331bcc>] (usb_set_interface+0x158/0x274)
> [<c0331bcc>] (usb_set_interface+0x158/0x274) from [<c03a8a30>] (uvc_video_enable+0x78/0x9c)
> [<c03a8a30>] (uvc_video_enable+0x78/0x9c) from [<c03a66c4>] (uvc_v4l2_do_ioctl+0xd08/0x12ec)
> [<c03a66c4>] (uvc_v4l2_do_ioctl+0xd08/0x12ec) from [<c036c044>] (video_usercopy+0x144/0x500)
> [<c036c044>] (video_usercopy+0x144/0x500) from [<c03a5444>] (uvc_v4l2_ioctl+0x2c/0x74)
> [<c03a5444>] (uvc_v4l2_ioctl+0x2c/0x74) from [<c036b208>] (v4l2_ioctl+0x94/0x154)
> [<c036b208>] (v4l2_ioctl+0x94/0x154) from [<c0128628>] (do_vfs_ioctl+0x84/0x5ac)
> [<c0128628>] (do_vfs_ioctl+0x84/0x5ac) from [<c0128bc8>] (sys_ioctl+0x78/0x80)
> [<c0128bc8>] (sys_ioctl+0x78/0x80) from [<c0052000>] (ret_fast_syscall+0x0/0x30)
>
> Considering the following execution sequence:
> CPU0                           CPU1
> musb_urb_dequeue
>  spin_lock_irqsave(&musb->lock, flags);
>   ready = qh->is_ready;
>    qh->is_ready = 0;
>     musb_giveback(musb, urb, 0);
>      spin_unlock(&musb->lock);
>                                zx296702_musb_interrupt
> 		                musb_interrupt
> 			         spin_lock_irqsave(&musb->lock, flags);
> 		                  musb_advance_schedule
> 		                   ready = qh->is_ready;
> 		                    qh->is_ready = 0;
> 		                     musb_giveback(musb, urb, status);
> 		                      spin_unlock(&musb->lock);
>       spin_lock(&musb->lock);
>        qh->is_ready = ready;
>         spin_unlock_irqrestore(&musb->lock, flags);
> 		                       spin_lock(&musb->lock);
> 			                qh->is_ready = ready;
>
> When musb_urb_dequeue is called finally, the qh->is_ready has already 
> been set to 0 in error.Thus the recycling qh job in musb_urb_dequeue 
> can not be done. That results in accessing empty qh in musb_h_disable.
> So the qh in musb_h_disable should be checked.If the qh is emtpy, 
> then recycle it and go to exit directly.		
>
> Signed-off-by: Liu Xiang <liu.xiang6@xxxxxxxxxx>
> ---
>  drivers/usb/musb/musb_host.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
> index 795a45b..438f5b4 100644
> --- a/drivers/usb/musb/musb_host.c
> +++ b/drivers/usb/musb/musb_host.c
> @@ -2515,7 +2515,12 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
>  	qh->is_ready = 0;
>  	if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
>  		urb = next_urb(qh);
> -
> +		if (urb == NULL) {

!urb would be nicer here.

Also, adding Bin as he'll become the new MUSB maintainer.

> +			qh->hep->hcpriv = NULL;
> +			list_del(&qh->ring);
> +			kfree(qh);
> +			goto exit;
> +		}
>  		/* make software (then hardware) stop ASAP */
>  		if (!urb->unlinked)
>  			urb->status = -ESHUTDOWN;
> -- 
> 1.9.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
balbi

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux