The dwc2 dual-role USB controller driver has started calling
usb_calc_bus_time, and does so regardless of whether it is
being built as a host controller or gadget. In case all
USB host support is disabled (CONFIG_USB=n), this now causes
a link error:
ERROR: "usb_calc_bus_time" [drivers/usb/dwc2/dwc2.ko] undefined!
Moving the function that is called from the USB HCD specific code
into the shared USB code avoids this problem.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Fixes: f889904b25df ("usb: dwc2: host: Properly set even/odd frame")
---
I have no idea if this is the correct solution for the problem,
it just seemed like the easiest way to avoid the build failure.
drivers/usb/common/common.c | 51 +++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/core/hcd.c | 51 ---------------------------------------------
2 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index e3d01619d6b3..654fd37f89d5 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -17,6 +17,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/of.h>
#include <linux/usb/otg.h>
+#include <linux/usb/hcd.h>
#include <linux/of_platform.h>
const char *usb_otg_state_string(enum usb_otg_state state)
@@ -126,6 +127,56 @@ enum usb_dr_mode usb_get_dr_mode(struct device *dev)
}
EXPORT_SYMBOL_GPL(usb_get_dr_mode);
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
+ * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
+ * @is_input: true iff the transaction sends data to the host
+ * @isoc: true for isochronous transactions, false for interrupt ones
+ * @bytecount: how many bytes in the transaction.
+ *
+ * Return: Approximate bus time in nanoseconds for a periodic transaction.
+ *
+ * Note:
+ * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
+ * scheduled in software, this function is only used for such scheduling.
+ */
+long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
+{
+ unsigned long tmp;
+
+ switch (speed) {
+ case USB_SPEED_LOW: /* INTR only */
+ if (is_input) {
+ tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
+ return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
+ } else {
+ tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
+ return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
+ }
+ case USB_SPEED_FULL: /* ISOC or INTR */
+ if (isoc) {
+ tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
+ return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
+ } else {
+ tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
+ return 9107L + BW_HOST_DELAY + tmp;
+ }
+ case USB_SPEED_HIGH: /* ISOC or INTR */
+ /* FIXME adjust for input vs output */
+ if (isoc)
+ tmp = HS_NSECS_ISO (bytecount);
+ else
+ tmp = HS_NSECS (bytecount);
+ return tmp;
+ default:
+ pr_debug ("%s: bogus device speed!\n", __func__);
+ return -1;
+ }
+}
+EXPORT_SYMBOL_GPL(usb_calc_bus_time);
+
#ifdef CONFIG_OF
/**
* of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 0b8a91004737..cbaa78043793 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1170,57 +1170,6 @@ EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
/*-------------------------------------------------------------------------*/
-/**
- * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
- * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
- * @is_input: true iff the transaction sends data to the host
- * @isoc: true for isochronous transactions, false for interrupt ones
- * @bytecount: how many bytes in the transaction.
- *
- * Return: Approximate bus time in nanoseconds for a periodic transaction.
- *
- * Note:
- * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
- * scheduled in software, this function is only used for such scheduling.
- */
-long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
-{
- unsigned long tmp;
-
- switch (speed) {
- case USB_SPEED_LOW: /* INTR only */
- if (is_input) {
- tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
- return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
- } else {
- tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
- return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
- }
- case USB_SPEED_FULL: /* ISOC or INTR */
- if (isoc) {
- tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
- return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
- } else {
- tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
- return 9107L + BW_HOST_DELAY + tmp;
- }
- case USB_SPEED_HIGH: /* ISOC or INTR */
- /* FIXME adjust for input vs output */
- if (isoc)
- tmp = HS_NSECS_ISO (bytecount);
- else
- tmp = HS_NSECS (bytecount);
- return tmp;
- default:
- pr_debug ("%s: bogus device speed!\n", usbcore_name);
- return -1;
- }
-}
-EXPORT_SYMBOL_GPL(usb_calc_bus_time);
-
-
-/*-------------------------------------------------------------------------*/
-
/*
* Generic HC operations.
*/
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
