This adds DT support for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx MUSB driver.
Signed-off-by: Petr Kulhavy <petr@xxxxxxxxx>
---
.../devicetree/bindings/usb/da8xx-usb.txt | 47 ++++++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/da8xx-usb.txt
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
new file mode 100644
index 0000000..62dcc51
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -0,0 +1,47 @@
+TI DA8xx MUSB
+~~~~~~~~~~~~~
+For DA830 and DA850 platforms.
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+ - compatible : Should be set to "ti,da830-musb".
+
+ - reg: Offset and length of the USB controller register set.
+
+ - interrupts: The USB interrupt number.
+
+ - interrupt-names: Should be set to "mc".
+
+ - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
+
+ - mentor,power : Specifies the maximum current in milliamperes the controller can
+ supply in host mode.
+
+ - ti,phy20-refclock-frequency : Integer. Defines the USB 2.0 PHY reference clock input
+ frequency in Hz in case the clock is generated by the internal PLL.
+ Supported values are 12MHz, 13MHz, 19.2MHz, 20MHz, 24MHz, 26MHz, 38.4MHz, 40MHz, 48MHz
+
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+ - ti,phy20-clkmux-pll: Boolean. Defines the USB 2.0 PHY reference clock source.
+ If present the internal PLL is used as a clock source, otherwise the external
+ USB_REFCLKIN pin is used.
+
+Example:
+
+ usb20: usb@1e00000 {
+ compatible = "ti,da830-musb";
+ reg = <0x00200000 0x10000>;
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+ interrupt-names = "mc";
+
+ dr_mode = "host";
+ mentor,power = <500>;
+
+ ti,phy20-clkmux-pll;
+ ti,phy20-refclock-frequency = <24000000>;
+
+ status = "okay";
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
