* Pali Rohár <pali.rohar@xxxxxxxxx> [160126 06:35]: > On Thursday 21 January 2016 12:30:13 Tony Lindgren wrote: > > * joerg Reisenweber <joerg@xxxxxxxxxxxx> [160121 11:35]: > > > On Thu 21 January 2016 11:21:13 Tony Lindgren wrote: > > > > Do you have some pointer > > > > to the "certain resistor value on ID to GND" spec? Is it maybe part of > > > > the carkit related parts of the USB spec? > > > > > > ""Three additional ID pin states are defined[4] at the nominal resistance > > > values of 124 kΩ, 68 kΩ, and 36.5 kΩ, with respect to the ground pin. These > > > permit the device to work with USB Accessory Charger Adapters that allows the > > > OTG device to be attached to both a charger and another device simultaneously. > > > [6]"" > > > https://en.wikipedia.org/wiki/USB_On-The-Go#OTG_micro_plugs > > > > OK thanks. So it's the "accessory charger" part of the > > battery charging specification 1.1. > > So, Tony, do you have some idea what needs to be changed and how to fix > peripheral mode after boot on Nokia N900? No, I'm waiting to hear an educated guess from Felipe on this one. > First I would like to have fully working peripheral mode on Nokia N900 > and then we can try to hack host mode (if possible). > > But peripheral mode is a must due to development, because it provides > usb network or usb tty. Totally. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
