This patch is needed in order to pass one test case defined in the OTG Automated Compliance Test specification. Specification location: http://www.usb.org/developers/onthego/otgeh_compliance_plan_1_2.pdf This test case uses PET Tool, and PET Tool is one USB hardware equipment provided by MQP Electronics. Test case id is 6.8.3 B-UUT Bypass Capacitance. We must set this otg flag in order to be able to return OTG descriptor during enumeration, otherwise this test case with failed with below error: "Get OTG descriptor request stalled". Signed-off-by: Jianqiang Tang <jianqiang.tang@xxxxxxxxx> --- Changes since v1: - remove the if () conditional for in favor of a comparison drivers/usb/dwc3/gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a58376f..955122c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2748,6 +2748,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; + dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG; /* * FIXME We might be setting max_speed to <SUPER, however versions -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
