Re: [PATCH v3 3/4] USB: serial: cp210x: Switch to new 8-bit and 32-bit register access functions.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/01/16 03:12, Konstantin Shkolnyy wrote:
Change to use new 8-bit and 32-bit register access functions instead of
cp210x_get_config and cp210x_set_config.

Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@xxxxxxxxx>

Acked-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>

---
change in v3: Presented new function addition as a separate patch #1,
to simplify code review.

  drivers/usb/serial/cp210x.c | 11 +++++------
  1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 7a91c6c..1339d77 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -787,10 +787,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
  {
  	struct device *dev = &port->dev;
  	unsigned int cflag, modem_ctl[4];
-	unsigned int baud;
+	u32 baud;
  	u16 bits;

-	cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
+	cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);

  	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
  	*baudp = baud;
@@ -937,8 +937,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
  	baud = cp210x_quantise_baudrate(baud);

  	dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
-	if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
-							sizeof(baud))) {
+	if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
  		dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
  		if (old_termios)
  			baud = old_termios->c_ospeed;
@@ -1109,10 +1108,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
  static int cp210x_tiocmget(struct tty_struct *tty)
  {
  	struct usb_serial_port *port = tty->driver_data;
-	unsigned int control;
+	u8 control;
  	int result;

-	cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+	cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);

  	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
  		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux