Change to use new 16-bit register access functions instead of
cp210x_get_config and cp210x_set_config.
Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@xxxxxxxxx>
---
change in v3: Presented new function addition as a separate patch #1,
to simplify code review.
drivers/usb/serial/cp210x.c | 80 ++++++++++++++++++---------------------------
1 file changed, 31 insertions(+), 49 deletions(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 324eb7e..7a91c6c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -588,17 +588,6 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
}
/*
- * cp210x_set_config_single
- * Convenience function for calling cp210x_set_config on single data values
- * without requiring an integer pointer
- */
-static inline int cp210x_set_config_single(struct usb_serial_port *port,
- u8 request, unsigned int data)
-{
- return cp210x_set_config(port, request, &data, 2);
-}
-
-/*
* Detect CP2108 GET_LINE_CTL bug and activate workaround.
* Write a known good value 0x800, read it back.
* If it comes back swapped the bug is detected.
@@ -607,48 +596,47 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
{
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
- unsigned int line_ctl_save;
- unsigned int line_ctl_test;
+ u16 line_ctl_save;
+ u16 line_ctl_test;
int err;
- err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_save, 2);
+ err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
if (err)
return err;
- line_ctl_test = 0x800;
- err = cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_test, 2);
+ err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
if (err)
return err;
- err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_test, 2);
+ err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
if (err)
return err;
/* has_swapped_line_ctl is 0 here because port_priv was kzalloced */
if (line_ctl_test == 8) {
port_priv->has_swapped_line_ctl = true;
- line_ctl_save = swab16((u16)line_ctl_save);
+ line_ctl_save = swab16(line_ctl_save);
}
- return cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_save, 2);
+ return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
}
/*
- * Must always be called instead of cp210x_get_config(CP210X_GET_LINE_CTL)
+ * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
* to workaround cp2108 bug and get correct value.
*/
-static int cp210x_get_line_ctl(struct usb_serial_port *port, unsigned int *ctl)
+static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
{
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
int err;
- err = cp210x_get_config(port, CP210X_GET_LINE_CTL, ctl, 2);
+ err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
if (err)
return err;
/* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
if (port_priv->has_swapped_line_ctl)
- *ctl = swab16((u16)(*ctl));
+ *ctl = swab16(*ctl);
return 0;
}
@@ -697,14 +685,11 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud)
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
{
- int result;
+ int err;
- result = cp210x_set_config_single(port, CP210X_IFC_ENABLE,
- UART_ENABLE);
- if (result) {
- dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
- return result;
- }
+ err = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
+ if (err)
+ return err;
/* Configure the termios structure */
cp210x_get_termios(tty, port);
@@ -718,15 +703,12 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
static void cp210x_close(struct usb_serial_port *port)
{
- unsigned int purge_ctl;
-
usb_serial_generic_close(port);
/* Clear both queues; cp2108 needs this to avoid an occasional hang */
- purge_ctl = PURGE_ALL;
- cp210x_set_config(port, CP210X_PURGE, &purge_ctl, 2);
+ cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
- cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
+ cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
}
/*
@@ -806,7 +788,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
struct device *dev = &port->dev;
unsigned int cflag, modem_ctl[4];
unsigned int baud;
- unsigned int bits;
+ u16 bits;
cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
@@ -839,14 +821,14 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
default:
dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
}
@@ -877,7 +859,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
}
@@ -889,7 +871,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
case BITS_STOP_1_5:
dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
bits &= ~BITS_STOP_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
case BITS_STOP_2:
dev_dbg(dev, "%s - stop bits = 2\n", __func__);
@@ -898,7 +880,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
default:
dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
bits &= ~BITS_STOP_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
}
@@ -972,7 +954,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
{
struct device *dev = &port->dev;
unsigned int cflag, old_cflag;
- unsigned int bits;
+ u16 bits;
unsigned int modem_ctl[4];
cflag = tty->termios.c_cflag;
@@ -1011,7 +993,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
bits |= BITS_DATA_8;
break;
}
- if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
dev_dbg(dev, "Number of data bits requested not supported by device\n");
}
@@ -1038,7 +1020,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
}
}
}
- if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
dev_dbg(dev, "Parity mode not supported by device\n");
}
@@ -1052,7 +1034,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
bits |= BITS_STOP_1;
dev_dbg(dev, "%s - stop bits = 1\n", __func__);
}
- if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
dev_dbg(dev, "Number of stop bits requested not supported by device\n");
}
@@ -1092,7 +1074,7 @@ static int cp210x_tiocmset(struct tty_struct *tty,
static int cp210x_tiocmset_port(struct usb_serial_port *port,
unsigned int set, unsigned int clear)
{
- unsigned int control = 0;
+ u16 control = 0;
if (set & TIOCM_RTS) {
control |= CONTROL_RTS;
@@ -1113,7 +1095,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
- return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
+ return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
}
static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
@@ -1147,7 +1129,7 @@ static int cp210x_tiocmget(struct tty_struct *tty)
static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
- unsigned int state;
+ u16 state;
if (break_state == 0)
state = BREAK_OFF;
@@ -1155,7 +1137,7 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
state = BREAK_ON;
dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
state == BREAK_OFF ? "off" : "on");
- cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
}
static int cp210x_port_probe(struct usb_serial_port *port)
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
