Hi Maciej, On Tue, Dec 15, 2015 at 6:19 PM, Maciej S. Szmigiero <mail@xxxxxxxxxxxxxxxxxxxxx> wrote: > Can we now use this change for repairing the USB support on UDOO board? > > This seems to work fine if not 100% correct: > --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi > @@ -122,7 +122,10 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usbh>; > vbus-supply = <®_usb_h1_vbus>; > - clocks = <&clks 201>; > + clocks = <&clks IMX6QDL_CLK_USBOH3>, > + <&clks IMX6QDL_CLK_USBOH3>, > + <&clks 201>; > + clock-names = "ipg", "ahb", "per"; > status = "okay"; Yes, just tested it and this makes USB to work again on Udoo board. As Peter is working on a solution for providing reset and clock to the USB hub, could you please help us debugging his proposal at http://www.spinics.net/lists/linux-usb/msg134171.html ? Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
