USB3 xHCI Error, unable to acces the disk

[Sébastien Deligny <sebdeligny@xxxxxxxxx>]

Hello I've report a bug on bug tracker but I've been advise to post it
directly to th mailing list. Here is my problem :

Connected on USB3 SSD as root partition, sometimes the system lags a
lot and I'm not able to stop the system properly as the FS become
readonly. Tested with 4.2 kernel. With testing version 4.3, the lags
occur again but after few minutes it come back to a stable situation.

Could you please CC'ed me in the answers of this post?

Here is the extract of journalctl :


Connected on USB3 SSD as root partition, sometimes the system lags a
lot and I'm not able to stop the system properly as the FS become
readonly. Tested with 4.2 kernel. With testing version 4.3, the lags
occur again but after few minutes it come back to a stable situation.
Here is the copy of journalctl :

déc. 08 23:10:52 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Unknown
event condition 10, HC probably busted
déc. 08 23:10:52 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Transfer
event for disabled endpoint or incorrect stream
déc. 08 23:10:52 Vulpus kernel: xhci_hcd 0000:00:14.0:
@000000021520e800 00000000 00000000 04000000 04088001
déc. 08 23:11:22 Vulpus kernel: sd 4:0:0:0: [sdb] tag#6
uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#6 CDB:
opcode=0x2a 2a 00 00 24 a3 e8 00 00 08 00
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#5
uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#5 CDB:
opcode=0x2a 2a 00 01 89 f5 b0 00 00 10 00
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4
uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4 CDB:
opcode=0x2a 2a 00 01 89 cf 98 00 00 28 00
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0
uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0 CDB:
opcode=0x2a 2a 00 01 44 c3 f0 00 00 90 00
déc. 08 23:11:37 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler start
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1
uas_zap_pending 0 uas-tag 2 inflight: CMD
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1 CDB:
opcode=0x2a 2a 00 08 85 1a 90 00 00 10 00
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2
uas_zap_pending 0 uas-tag 3 inflight: CMD
déc. 08 23:11:37 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2 CDB:
opcode=0x2a 2a 00 0e 39 c3 d0 00 00 08 00
déc. 08 23:11:37 Vulpus kernel: usb 3-3: reset SuperSpeed USB device
number 2 using xhci_hcd
déc. 08 23:11:37 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler success
déc. 08 23:17:41 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Unknown
event condition 10, HC probably busted
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2
uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2 CDB:
opcode=0x2a 2a 00 02 1f 78 50 00 04 00 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1
uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1 CDB:
opcode=0x2a 2a 00 02 1f 77 98 00 00 b8 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#11
uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#11 CDB:
opcode=0x2a 2a 00 02 1f 73 98 00 04 00 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0
uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0 CDB:
opcode=0x2a 2a 00 02 1f 72 20 00 01 78 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#10
uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#10 CDB:
opcode=0x2a 2a 00 02 1f 6e a8 00 03 78 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#9
uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#9 CDB:
opcode=0x2a 2a 00 02 1f 6a e8 00 03 c0 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#8
uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#8 CDB:
opcode=0x2a 2a 00 02 1f 67 50 00 03 98 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#7
uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#7 CDB:
opcode=0x2a 2a 00 02 1f 63 c8 00 03 88 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#6
uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#6 CDB:
opcode=0x2a 2a 00 02 1f 60 48 00 03 80 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#5
uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#5 CDB:
opcode=0x2a 2a 00 02 1f 5c 60 00 03 e8 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4
uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4 CDB:
opcode=0x2a 2a 00 02 1f 58 60 00 04 00 00
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3
uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
déc. 08 23:18:12 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3 CDB:
opcode=0x2a 2a 00 02 1f 54 60 00 04 00 00
déc. 08 23:18:12 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler start
déc. 08 23:18:12 Vulpus kernel: usb 3-3: reset SuperSpeed USB device
number 2 using xhci_hcd
déc. 08 23:18:12 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler success
déc. 08 23:18:13 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Unknown
event condition 10, HC probably busted
déc. 08 23:18:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0
uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
déc. 08 23:18:52 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0 CDB:
opcode=0x2a 2a 00 02 20 6c f8 00 03 90 00
déc. 08 23:18:52 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1
uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
déc. 08 23:18:52 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1 CDB:
opcode=0x2a 2a 00 01 99 03 d8 00 00 20 00
déc. 08 23:18:52 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler start
déc. 08 23:18:52 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2
uas_zap_pending 0 uas-tag 3 inflight: CMD
déc. 08 23:18:52 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2 CDB:
opcode=0x2a 2a 00 0e 35 be 00 00 00 10 00
déc. 08 23:18:52 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3
uas_zap_pending 0 uas-tag 4 inflight: CMD
déc. 08 23:18:52 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3 CDB:
opcode=0x2a 2a 00 08 85 1f a0 00 00 20 00
déc. 08 23:18:52 Vulpus kernel: usb 3-3: reset SuperSpeed USB device
number 2 using xhci_hcd
déc. 08 23:18:52 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler success
déc. 08 23:18:53 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Unknown
event condition 10, HC probably busted
déc. 08 23:19:23 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0
uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
déc. 08 23:19:53 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0 CDB:
opcode=0x2a 2a 00 02 22 7f d8 00 04 00 00
déc. 08 23:19:53 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1
uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
déc. 08 23:19:53 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1 CDB:
opcode=0x2a 2a 00 08 85 1f f8 00 00 10 00
déc. 08 23:19:53 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler start
déc. 08 23:19:53 Vulpus kernel: usb 3-3: reset SuperSpeed USB device
number 2 using xhci_hcd
déc. 08 23:19:53 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler success
déc. 08 23:19:53 Vulpus wpa_supplicant[312]: wlp2s0: WPA: Group
rekeying completed with f4:ca:e5:b7:84:14 [GTK=TKIP]
déc. 08 23:19:54 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Unknown
event condition 10, HC probably busted
déc. 08 23:20:25 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1
uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
déc. 08 23:20:25 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1 CDB:
opcode=0x2a 2a 00 00 8b 7c 18 00 03 c8 00
déc. 08 23:20:25 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler start
déc. 08 23:20:25 Vulpus kernel: usb 3-3: reset SuperSpeed USB device
number 2 using xhci_hcd
déc. 08 23:20:25 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler success
déc. 08 23:20:26 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Unknown
event condition 10, HC probably busted
déc. 08 23:20:56 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1
uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
déc. 08 23:21:01 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1 CDB:
opcode=0x2a 2a 00 00 8b f6 30 00 03 d0 00
déc. 08 23:21:01 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0
uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
déc. 08 23:21:01 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0 CDB:
opcode=0x2a 2a 00 0e 15 b4 08 00 00 08 00
déc. 08 23:21:01 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler start
déc. 08 23:21:01 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2
uas_zap_pending 0 uas-tag 3 inflight: CMD
déc. 08 23:21:01 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2 CDB:
opcode=0x2a 2a 00 0e 15 b4 20 00 00 08 00
déc. 08 23:21:01 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3
uas_zap_pending 0 uas-tag 4 inflight: CMD
déc. 08 23:21:01 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3 CDB:
opcode=0x2a 2a 00 0e 15 b4 b0 00 00 08 00
déc. 08 23:21:01 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4
uas_zap_pending 0 uas-tag 5 inflight: CMD
déc. 08 23:21:01 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4 CDB:
opcode=0x2a 2a 00 0e 15 bb 80 00 00 08 00
déc. 08 23:21:01 Vulpus kernel: usb 3-3: reset SuperSpeed USB device
number 2 using xhci_hcd
déc. 08 23:21:01 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler success
déc. 08 23:21:02 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Unknown
event condition 10, HC probably busted
déc. 08 23:21:33 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0
uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0 CDB:
opcode=0x2a 2a 00 02 50 ed 08 00 03 d0 00
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1
uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1 CDB:
opcode=0x2a 2a 00 02 50 ec b0 00 00 58 00
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4
uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4 CDB:
opcode=0x2a 2a 00 02 50 e8 b0 00 04 00 00
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2
uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2 CDB:
opcode=0x2a 2a 00 02 50 e4 b0 00 04 00 00
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3
uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3 CDB:
opcode=0x2a 2a 00 02 50 e1 e0 00 02 d0 00
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#5
uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#5 CDB:
opcode=0x2a 2a 00 0e 34 bd 18 00 00 08 00
déc. 08 23:21:43 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler start
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#6
uas_zap_pending 0 uas-tag 7 inflight: CMD
déc. 08 23:21:43 Vulpus kernel: sd 4:0:0:0: [sdb] tag#6 CDB:
opcode=0x2a 2a 00 08 85 20 f8 00 00 38 00
déc. 08 23:21:43 Vulpus kernel: usb 3-3: reset SuperSpeed USB device
number 2 using xhci_hcd
déc. 08 23:21:43 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler success
déc. 08 23:21:44 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Unknown
event condition 10, HC probably busted
déc. 08 23:22:14 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1
uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
déc. 08 23:22:14 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1 CDB:
opcode=0x2a 2a 00 02 51 ab 00 00 01 98 00
déc. 08 23:22:14 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2
uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
déc. 08 23:22:14 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2 CDB:
opcode=0x2a 2a 00 02 51 a9 d8 00 01 28 00
déc. 08 23:22:14 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0
uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
déc. 08 23:22:14 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0 CDB:
opcode=0x2a 2a 00 02 51 a5 d8 00 04 00 00
déc. 08 23:22:14 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3
uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
déc. 08 23:22:14 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3 CDB:
opcode=0x2a 2a 00 02 51 a1 d8 00 04 00 00
déc. 08 23:22:14 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler start
déc. 08 23:22:14 Vulpus kernel: usb 3-3: reset SuperSpeed USB device
number 2 using xhci_hcd
déc. 08 23:22:14 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler success
déc. 08 23:22:14 Vulpus polkitd[313]: Unregistered Authentication
Agent for unix-session:c1 (system bus name :1.39, ob
déc. 08 23:22:15 Vulpus sudo[5891]: pam_unix(sudo:session): session
closed for user root
déc. 08 23:22:19 Vulpus dbus-daemon[2262]: Activating service
name='org.freedesktop.thumbnails.Thumbnailer1'
déc. 08 23:22:19 Vulpus org.freedesktop.thumbnails.Thumbnailer1[2262]:
(tumblerd:7242): tumbler-WARNING **: Failed to
déc. 08 23:22:19 Vulpus org.freedesktop.thumbnails.Thumbnailer1[2262]:
(tumblerd:7242): tumbler-WARNING **: Failed to
déc. 08 23:22:19 Vulpus org.freedesktop.thumbnails.Thumbnailer1[2262]:
(tumblerd:7242): tumbler-WARNING **: Failed to
déc. 08 23:22:19 Vulpus org.freedesktop.thumbnails.Thumbnailer1[2262]:
(tumblerd:7242): tumbler-WARNING **: Failed to
déc. 08 23:22:19 Vulpus dbus-daemon[2262]: Successfully activated
service 'org.freedesktop.thumbnails.Thumbnailer1'
déc. 08 23:22:19 Vulpus gnome-keyring-daemon[7254]: couldn't access
control socket: /run/user/1000/keyring/control: Au
déc. 08 23:22:20 Vulpus polkitd[313]: Registered Authentication Agent
for unix-session:c1 (system bus name :1.51 [/usr
déc. 08 23:22:20 Vulpus dbus-daemon[2262]: Activating service
name='org.freedesktop.Notifications'
déc. 08 23:22:20 Vulpus kernel: xhci_hcd 0000:00:14.0: ERROR Unknown
event condition 10, HC probably busted
déc. 08 23:22:20 Vulpus dbus-daemon[2262]: Activating service
name='org.freedesktop.Notifications'
déc. 08 23:22:20 Vulpus org.freedesktop.Notifications[2262]:
(xfce4-notifyd:7303): Gtk-WARNING **: cannot open display
déc. 08 23:22:20 Vulpus dbus-daemon[2262]: Activated service
'org.freedesktop.Notifications' failed: Process org.freed
déc. 08 23:22:20 Vulpus dbus-daemon[2262]: Activating service
name='org.freedesktop.Notifications'
déc. 08 23:22:20 Vulpus org.freedesktop.Notifications[2262]:
(xfce4-notifyd:7305): Gtk-WARNING **: cannot open display
déc. 08 23:22:20 Vulpus dbus-daemon[2262]: Activated service
'org.freedesktop.Notifications' failed: Process org.freed
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3
uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#3 CDB:
opcode=0x2a 2a 00 02 01 16 88 00 00 08 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2
uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#2 CDB:
opcode=0x2a 2a 00 02 01 16 68 00 00 10 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1
uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#1 CDB:
opcode=0x2a 2a 00 02 01 14 f0 00 00 08 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0
uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#0 CDB:
opcode=0x2a 2a 00 02 01 14 d8 00 00 08 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#11
uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#11 CDB:
opcode=0x2a 2a 00 02 01 14 70 00 00 08 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#10
uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#10 CDB:
opcode=0x2a 2a 00 02 01 14 58 00 00 08 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#9
uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#9 CDB:
opcode=0x2a 2a 00 02 01 12 50 00 00 08 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#8
uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#8 CDB:
opcode=0x2a 2a 00 02 00 5f 00 00 02 30 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#7
uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#7 CDB:
opcode=0x2a 2a 00 00 c6 1f e0 00 03 d0 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#6
uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#6 CDB:
opcode=0x2a 2a 00 00 c6 1b e0 00 04 00 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#5
uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#5 CDB:
opcode=0x2a 2a 00 00 c6 1a f0 00 00 f0 00
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4
uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
déc. 08 23:22:51 Vulpus kernel: sd 4:0:0:0: [sdb] tag#4 CDB:
opcode=0x2a 2a 00 00 c6 16 f0 00 04 00 00
déc. 08 23:22:51 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler start
déc. 08 23:22:51 Vulpus kernel: usb 3-3: reset SuperSpeed USB device
number 2 using xhci_hcd
déc. 08 23:22:51 Vulpus kernel: scsi host4: uas_eh_bus_reset_handler success
déc. 08 23:24:03 Vulpus sudo[7399]: sebastien : TTY=pts/0 ;
PWD=/home/sebastien ; USER=root ; COMMAND=/usr/bin/ls
déc. 08 23:24:03 Vulpus sudo[7399]: pam_unix(sudo:session): session
opened for user root by (uid=0)
déc. 08 23:24:03 Vulpus sudo[7399]: pam_unix(sudo:session): session
closed for user root
déc. 08 23:24:03 Vulpus sudo[7401]: sebastien : TTY=pts/1 ;
PWD=/home/sebastien ; USER=root ; COMMAND=/usr/bin/pacmanx
déc. 08 23:24:03 Vulpus sudo[7401]: pam_unix(sudo:session): session
opened for user root by (uid=0)
déc. 08 23:24:35 Vulpus sudo[7401]: pam_unix(sudo:session): session
closed for user root
déc. 08 23:24:50 Vulpus dbus-daemon[2262]: Activating service
name='org.freedesktop.secrets'
déc. 08 23:24:50 Vulpus dbus-daemon[2262]: Successfully activated
service 'org.freedesktop.secrets'
déc. 08 23:24:50 Vulpus org.freedesktop.secrets[2262]:
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
déc. 08 23:25:00 Vulpus dbus-daemon[2262]: Activating service
name='org.gnome.keyring.SystemPrompter'
déc. 08 23:25:00 Vulpus org.gnome.keyring.SystemPrompter[2262]: Unable
to init server: Impossible de se connecter : Co
déc. 08 23:25:00 Vulpus org.gnome.keyring.SystemPrompter[2262]:
(gcr-prompter:7959): Gtk-WARNING **: cannot open displ
déc. 08 23:25:00 Vulpus dbus-daemon[2262]: Activated service
'org.gnome.keyring.SystemPrompter' failed: Process org.gn
déc. 08 23:25:00 Vulpus gnome-keyring-daemon[7254]: couldn't create
system prompt: GDBus.Error:org.freedesktop.DBus.Er
-- Reboot --



-- 
lesebas
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html