On Tue, Dec 08, 2015 at 08:36:00AM -0700, Mathieu Poirier wrote:
> On 7 December 2015 at 18:37, Peter Chen <peter.chen@xxxxxxxxxxxxx> wrote:
> > +
> > + if (dev->of_node) {
> > + struct device_node *node = dev->of_node;
> > +
> > + hub_data->clk = devm_clk_get(dev, "external_clk");
> > + if (IS_ERR(hub_data->clk)) {
> > + dev_dbg(dev, "Can't get external clock: %ld\n",
> > + PTR_ERR(hub_data->clk));
> > + }
>
> Is the intended behaviour to keep going here event when there is an
> error? Can the "hub_data" really work without a clock?
Yes, some HUB may work with fixed 24M OSC at the board, but they need to
reset through external IO, so the clock is not need at this case, but
reset pin is mandatory.
> > + }
> > +
> > + if (gpiod_reset) {
> > + /* Sanity check */
> > + if (duration_us > 1000000)
> > + duration_us = 50;
> > + usleep_range(duration_us, duration_us + 100);
> > + gpiod_set_value(gpiod_reset, reset_pol ? 0 : 1);
>
> What are these hard-coded values? Shouldn't this be taken from the
> DT? If not then some comments explaining the values would be
> appreciated.
Yes, I did it wrongly, thanks.
> > diff --git a/include/linux/usb/generic_onboard_hub.h b/include/linux/usb/generic_onboard_hub.h
> > new file mode 100644
> > index 0000000..1b70ccc
> > --- /dev/null
> > +++ b/include/linux/usb/generic_onboard_hub.h
> > @@ -0,0 +1,11 @@
> > +#ifndef __LINUX_USB_GENERIC_HUB_H
> > +#define __LINUX_USB_GENERIC_HUB_H
> > +
> > +struct usb_hub_generic_platform_data {
> > + int gpio_reset;
> > + int gpio_reset_polarity;
> > + int gpio_reset_duration_us;
> > + struct clk *ext_clk;
> > +};
>
> Please document this structure in accordance with kernel documentation
> standards.
>
Thanks, it should be.
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
