Hi all, There is a known issue that the USB code can't handle USB HUB's external pins well, in that case, it may cause some onboard USB HUBs can't work since their PHY's clock or reset pin needs to operate. The user reported this issue at below: http://www.spinics.net/lists/linux-usb/msg131502.html In this patch set, I add a generic onboard USB HUB driver to handle this problem, the external signals will be configured before usb controller's initialization, it much likes we did it at board code before. The user needs to add this generic hub node at dts or add releted platform data to support it. The udoo users, help to test please. Peter Chen (3): usb: misc: generic_onboard_hub: add generic onboard USB HUB driver doc: dt-binding: generic onboard USB HUB ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property .../bindings/usb/generic-onboard-hub.txt | 28 ++++ MAINTAINERS | 7 + arch/arm/boot/dts/imx6qdl-udoo.dtsi | 25 +--- drivers/usb/misc/Kconfig | 9 ++ drivers/usb/misc/Makefile | 1 + drivers/usb/misc/generic_onboard_hub.c | 162 +++++++++++++++++++++ include/linux/usb/generic_onboard_hub.h | 11 ++ 7 files changed, 224 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/generic-onboard-hub.txt create mode 100644 drivers/usb/misc/generic_onboard_hub.c create mode 100644 include/linux/usb/generic_onboard_hub.h -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
