On Thu, Nov 19, 2015 at 08:26:22PM +0100, Felipe Balbi wrote: > > Hi, > > Gregory Herrero <gregory.herrero@xxxxxxxxx> writes: > > From: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx> > > > > As descriptor dma mode does not support split transfers, it can't be > > enabled for high speed devices. Add a core parameter to enable it for > > full speed devices. > > > > Ensure frame list and descriptor list are correctly freed during > > disconnect. > > > > Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx> > > Signed-off-by: Gregory Herrero <gregory.herrero@xxxxxxxxx> > > this one doesn't apply: > > Applying: usb: dwc2: host: enable descriptor dma for fs devices > error: drivers/usb/dwc2/core.h: does not match index > error: drivers/usb/dwc2/hcd.c: does not match index > error: drivers/usb/dwc2/hcd_intr.c: does not match index > error: drivers/usb/dwc2/platform.c: does not match index > Patch failed at 0001 usb: dwc2: host: enable descriptor dma for fs devices > The copy of the patch that failed is found in: workspace/linux/.git/rebase-apply/patch > When you have resolved this problem, run "git am --continue". > If you prefer to skip this patch, run "git am --skip" instead. > To restore the original branch and stop patching, run "git am --abort". > > Care to rebase on my testing/next ? Patches 1-9 are already applied. > Ok, I will resend patches 10-13 rebased on your testing/next. Regards, Gregory -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
