It seems like this device has same vendor and product IDs as G2K
devices, but it has different number of interfaces(4 vs 5) and also
different interface layout which makes it currently unusable:
usbcore: registered new interface driver qcserial
usbserial: USB Serial support registered for Qualcomm USB modem
usb 2-1.2: unknown number of interfaces: 5
lsusb output:
Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05c6 Qualcomm, Inc.
idProduct 0x9215 Acer Gobi 2000 Wireless Modem
bcdDevice 2.32
iManufacturer 1 Quectel
iProduct 2 Quectel LTE Module
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 209
bNumInterfaces 5
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Signed-off-by: Petr Štetiar <ynezz@xxxxxxx>
---
drivers/usb/serial/qcserial.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index ebcec8c..d462132 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -22,6 +22,8 @@
#define DRIVER_AUTHOR "Qualcomm Inc"
#define DRIVER_DESC "Qualcomm USB Serial driver"
+#define QUECTEL_EC20_IDPRODUCT 0x9215
+
/* standard device layouts supported by this driver */
enum qcserial_layouts {
QCSERIAL_G2K = 0, /* Gobi 2000 */
@@ -167,6 +169,38 @@ static const struct usb_device_id id_table[] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
+static int handle_quectel_ec20(struct device *dev, int ifnum)
+{
+ int altsetting = 0;
+
+ /*
+ * Quectel EC20 Mini PCIe LTE module layout:
+ * 0: DM/DIAG (use libqcdm from ModemManager for communication)
+ * 1: NMEA
+ * 2: AT-capable modem port
+ * 3: Modem interface
+ * 4: NDIS
+ */
+ switch (ifnum) {
+ case 0:
+ dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
+ break;
+ case 1:
+ dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
+ break;
+ case 2:
+ case 3:
+ dev_dbg(dev, "Quectel EC20 Modem port found\n");
+ break;
+ case 4:
+ /* Don't claim the QMI/net interface */
+ altsetting = -1;
+ break;
+ }
+
+ return altsetting;
+}
+
static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
{
struct usb_host_interface *intf = serial->interface->cur_altsetting;
@@ -235,6 +269,11 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
altsetting = -1;
break;
case QCSERIAL_G2K:
+ if (nintf == 5 && id->idProduct == QUECTEL_EC20_IDPRODUCT) {
+ altsetting = handle_quectel_ec20(dev, ifnum);
+ goto done;
+ }
+
/*
* Gobi 2K+ USB layout:
* 0: QMI/net
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
