On Sat, Oct 31, 2015 at 7:16 AM, Johan Hovold <johan@xxxxxxxxxx> wrote: > [ Please avoid top-posting. ] > > On Thu, Oct 29, 2015 at 08:39:04AM -0500, Konstantin Shkolnyy wrote: >> I tested it on cp2102, cp2105 and cp2108. >> I'm a little worried about that extra PURGE command, so I did several >> manual tests on each with a standard PC serial port on the other end >> of the cable. >> - run several open/write/close iteration (the test that used to break >> cp2108), observe data on the other end; >> - open minicom and see that cp210x can still receive data from the other end. > > Sounds good. > > If this turns out to cause any problems, we can always enable this based > on chip type, right? I saw something about a vendor request for that in > your (silabs') vendor driver. Yes, there is a register with the chip type. [...] -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
