On Wed, Oct 28, 2015 at 09:51:26AM +0100, Johan Hovold wrote: > On Tue, Oct 27, 2015 at 04:53:34PM -0500, Konstantin Shkolnyy wrote: > > cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. > > However, SET_LINE_CTL functions properly. When the driver tries to modify > > the register, it reads it, modifies some bits and writes back. Because the > > read bytes were swapped, this often results in an invalid value to be > > written. In turn, this causes cp2108 respond with a stall. The stall > > sometimes doesn't clear properly and cp2108 starts responding to following > > valid commands also with stalls, effectively failing. > > > > Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@xxxxxxxxx> > I gave the series a really quick test on an cp2102-device I had lying > around. I assume you verified the changes on some other older devices as > well? Did you test this series on the older device types as well? Thanks, Johan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
