On Wed, Oct 28, 2015 at 02:25:41PM +0100, Michal Marek wrote:
> From: Michal Marek <mmarek@xxxxxxxx>
>
> This allows to write
>
> drm-$(CONFIG_AGP) += drm_agpsupport.o
>
> without having to handle CONFIG_AGP=y vs. CONFIG_AGP=m. Only support
> this syntax for modules, since built-in code depending on something
> modular cannot work and init/Makefile actually relies on the current
> semantics. There are a few drivers which adapted to the current
> semantics out of necessity; these are fixed to also work when the
> respective subsystem is modular.
>
> Cc: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
> Cc: linux-usb@xxxxxxxxxxxxxxx
> Cc: Joern Engel <joern@xxxxxxxxx>
> Cc: Prasad Joshi <prasadjoshi.linux@xxxxxxxxx>
> Cc: logfs@xxxxxxxxx
> Signed-off-by: Michal Marek <mmarek@xxxxxxxx>
> ---
> drivers/misc/ibmasm/ibmasm.h | 2 +-
> drivers/usb/chipidea/otg_fsm.h | 2 +-
> fs/logfs/logfs.h | 2 +-
> scripts/Makefile.build | 8 ++++++--
> scripts/Makefile.lib | 4 ++--
> 5 files changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/misc/ibmasm/ibmasm.h b/drivers/misc/ibmasm/ibmasm.h
> index 9b08344..5bd1277 100644
> --- a/drivers/misc/ibmasm/ibmasm.h
> +++ b/drivers/misc/ibmasm/ibmasm.h
> @@ -211,7 +211,7 @@ void ibmasmfs_unregister(void);
> void ibmasmfs_add_sp(struct service_processor *sp);
>
> /* uart */
> -#ifdef CONFIG_SERIAL_8250
> +#if IS_ENABLED(CONFIG_SERIAL_8250)
> void ibmasm_register_uart(struct service_processor *sp);
> void ibmasm_unregister_uart(struct service_processor *sp);
> #else
> diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
> index 2689375..262d6ef 100644
> --- a/drivers/usb/chipidea/otg_fsm.h
> +++ b/drivers/usb/chipidea/otg_fsm.h
> @@ -62,7 +62,7 @@
> /* SSEND time before SRP */
> #define TB_SSEND_SRP (1500) /* minimum 1.5 sec, section:5.1.2 */
>
> -#ifdef CONFIG_USB_OTG_FSM
> +#if IS_ENABLED(CONFIG_USB_OTG_FSM)
Does it mean if the configuration is tristate, it must use IS_ENABLED?
Peter
>
> int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci);
> int ci_otg_fsm_work(struct ci_hdrc *ci);
> diff --git a/fs/logfs/logfs.h b/fs/logfs/logfs.h
> index 5f09376..23f961a 100644
> --- a/fs/logfs/logfs.h
> +++ b/fs/logfs/logfs.h
> @@ -485,7 +485,7 @@ static inline int logfs_get_sb_bdev(struct logfs_super *s,
> #endif
>
> /* dev_mtd.c */
> -#ifdef CONFIG_MTD
> +#if IS_ENABLED(CONFIG_MTD)
> int logfs_get_sb_mtd(struct logfs_super *s, int mtdnr);
> #else
> static inline int logfs_get_sb_mtd(struct logfs_super *s, int mtdnr)
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index 01df30a..2c47f9c 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -372,10 +372,14 @@ endif
> # <composite-object>-objs := <list of .o files>
> # or
> # <composite-object>-y := <list of .o files>
> +# or
> +# <composite-object>-m := <list of .o files>
> +# The -m syntax only works if <composite object> is a module
> link_multi_deps = \
> $(filter $(addprefix $(obj)/, \
> $($(subst $(obj)/,,$(@:.o=-objs))) \
> -$($(subst $(obj)/,,$(@:.o=-y)))), $^)
> +$($(subst $(obj)/,,$(@:.o=-y))) \
> +$($(subst $(obj)/,,$(@:.o=-m)))), $^)
>
> quiet_cmd_link_multi-y = LD $@
> cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
> @@ -390,7 +394,7 @@ $(call multi_depend, $(multi-used-y), .o, -objs -y)
> $(multi-used-m): FORCE
> $(call if_changed,link_multi-m)
> @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
> -$(call multi_depend, $(multi-used-m), .o, -objs -y)
> +$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
>
> targets += $(multi-used-y) $(multi-used-m)
>
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index 79e8661..e18957b 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -48,7 +48,7 @@ subdir-ym := $(sort $(subdir-y) $(subdir-m))
>
> # if $(foo-objs) exists, foo.o is a composite object
> multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
> -multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
> +multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))), $(m))))
> multi-used := $(multi-used-y) $(multi-used-m)
> single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
>
> @@ -67,7 +67,7 @@ obj-dirs := $(dir $(multi-objs) $(obj-y))
>
> # Replace multi-part objects by their individual parts, look at local dir only
> real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
> -real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
> +real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
>
> # Add subdir path
>
> --
> 1.9.2
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
