From: Rafał Miłecki <zajec5@xxxxxxxxx>
It wasn't working (on most of devices?) without setting GPIO direction
and wasn't respecting ACTIVE_LOW flag.
Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
---
drivers/usb/host/bcma-hcd.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
index 32815e6..c748562 100644
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/usb/xhci_pdriver.h>
@@ -231,17 +232,22 @@ static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
{
+ enum of_gpio_flags of_flags;
int gpio;
- gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
+ gpio = of_get_named_gpio_flags(dev->dev.of_node, "vcc-gpio", 0, &of_flags);
if (!gpio_is_valid(gpio))
return;
if (val) {
- gpio_request(gpio, "bcma-hcd-gpio");
- gpio_set_value(gpio, 1);
+ unsigned long flags = 0;
+ bool active_low = !!(of_flags & OF_GPIO_ACTIVE_LOW);
+
+ flags |= active_low ? GPIOF_ACTIVE_LOW : 0;
+ flags |= active_low ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH;
+ gpio_request_one(gpio, flags, "bcma-hcd-gpio");
} else {
- gpio_set_value(gpio, 0);
+ gpiod_set_value(gpio_to_desc(gpio), 0);
gpio_free(gpio);
}
}
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
