On 9/22/2015 6:15 AM, Mian Yousaf Kaukab wrote: > Hi, > This series consists of various bug fixes for both host and gadget > sides. All patches are verified on dwc2 v3.0a with dedicated fifos. > It would be good to get some Tested-bys for other platforms. > > It is based on testing/next branch in Felipe's git. > > Thank you, > > Best regards, > Yousaf > > History: > v2: > - Rebase to latest testing/next > - Fix lock issue found by John Youn when calling > dwc2_hsotg_core_init_disconnected() from dwc2_conn_id_status_change() > - Fix comments from John Youn > - Fix comments from Doug Anderson > > v1: > - Fix following comments from David Cohen (received on an internal > list): > - Fix build when "usb: dwc2: host: create a function to handle- > port_resume" is applied. > - Take spin locks within if statements in "usb: dwc2: host: enter- > hibernation during bus suspend" > - Remove extra 100us delay in "usb: dwc2: host: enter- > hibernation during bus suspend" > - Fix spelling mistakes in "usb: dwc2: host: update hcd and- > lx_state during start/stop callbacks" > - Change dev_warn to dev_dbg in "usb: dwc2: host: reset frame- > number after suspend" > - Change mdelay to usleep_range in "usb: dwc2: host: wait 3ms for- > controller stabilization" > - Fix comments from Sergei Shtylyov > > Gregory Herrero (22): > usb: dwc2: host: don't clear hprt0 status bits when exiting > hibernation > usb: dwc2: host: create a function to handle port_resume > usb: dwc2: host: add flag to reflect bus state > usb: dwc2: host: enter hibernation during bus suspend > usb: dwc2: host: update hcd and lx_state during start/stop callbacks > usb: dwc2: host: avoid resetting lx_state to L3 during disconnect > usb: dwc2: host: ignore wakeup interrupt if hibernation supported > usb: dwc2: host: resume only if bus is suspended > usb: dwc2: host: reset frame number after suspend > usb: dwc2: host: disconnect hcd prior stopping it > usb: dwc2: host: disable interrupt during stop > usb: dwc2: host: clear pending interrupts prior hibernation > usb: dwc2: host: wait 3ms for controller stabilization > usb: dwc2: host: correctly dump urb isochronous descriptors > usb: dwc2: host: use correct frame number during qh init > usb: dwc2: host: kill remaining urbs using -ECONNRESET status > usb: dwc2: gadget: ensure lx_state corresponds to current state > usb: dwc2: gadget: don't modify pullup state in host mode > usb: dwc2: gadget: set op_state in vbus_session call > usb: dwc2: gadget: abort core init if core_reset fails > usb: dwc2: gadget: unmask idstschng interrupt only if controller > supports it > usb: dwc2: gadget: exit hibernation before power down > > Mian Yousaf Kaukab (10): > usb: dwc2: host: add disconnect interrupt to host only interrupts > usb: dwc2: gadget: initialize op_state for peripheral only > configuration > usb: dwc2: force dr_mode in case of configuration mismatch > usb: dwc2: gadget: ignore stall check for ep0 > usb: dwc2: gadget: print complete setup packet > usb: dwc2: gadget: stop current transfer on dequeue > usb: dwc2: gadget: kill ep0 requests before reinitializing core > usb: dwc2: gadget: only reset core after addressed state > usb: dwc2: gadget: handle reset interrupt before endpoint interrupts > usb: dwc2: exit hibernation on session request > > drivers/usb/dwc2/core.c | 14 ++- > drivers/usb/dwc2/core.h | 3 +- > drivers/usb/dwc2/core_intr.c | 29 ++++-- > drivers/usb/dwc2/gadget.c | 210 ++++++++++++++++++++++++++++++------------- > drivers/usb/dwc2/hcd.c | 209 ++++++++++++++++++++++++++++++++++++------ > drivers/usb/dwc2/hcd_queue.c | 11 +++ > drivers/usb/dwc2/platform.c | 11 +++ > 7 files changed, 386 insertions(+), 101 deletions(-) > For this series: Tested-by: John Youn <johnyoun@xxxxxxxxxxxx> Acked-by: John Youn <johnyoun@xxxxxxxxxxxx> Regards, John -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
