On Fri, 2015-07-31 at 19:48 +0530, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Friday 31 July 2015 05:55 PM, chunfeng yun wrote:
> > hi,
> > On Tue, 2015-07-28 at 11:17 +0530, Kishon Vijay Abraham I wrote:
> >> Hi,
> >>
> >> On Sunday 26 July 2015 08:21 AM, chunfeng yun wrote:
> >>> hi,
> >>> On Wed, 2015-07-22 at 09:21 -0500, Felipe Balbi wrote:
> >>>> Hi,
> >>>>
> >>>> On Wed, Jul 22, 2015 at 10:05:43PM +0800, Chunfeng Yun wrote:
> >>>>> support usb3.0 phy of mt65xx SoCs
> >>>>>
> >>>>> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> >>>>
> >>>> you missed Kishon here.
> >>>>
> >>> Thank you.
> >>>>> ---
> >>>>> drivers/phy/Kconfig | 9 +
> >>>>> drivers/phy/Makefile | 1 +
> >>>>> drivers/phy/phy-mt65xx-usb3.c | 426 ++++++++++++++++++++++++++++++++++++++++++
> >>>>> 3 files changed, 436 insertions(+)
> >>>>> create mode 100644 drivers/phy/phy-mt65xx-usb3.c
> >>>>>
> >>>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> >>>>> index c0e6ede..019cf8b 100644
> >>>>> --- a/drivers/phy/Kconfig
> >>>>> +++ b/drivers/phy/Kconfig
> >>>>> @@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA
> >>>>> help
> >>>>> Support for SATA PHY on Hisilicon hix5hd2 Soc.
> >>>>>
> >>>>> +config PHY_MT65XX_USB3
> >>>>> + tristate "Mediatek USB3.0 PHY Driver"
> >>>>> + depends on ARCH_MEDIATEK && OF
> >>>>> + select GENERIC_PHY
> >>>>> + help
> >>>>> + Say 'Y' here to add support for Mediatek USB3.0 PHY driver
> >>>>> + for mt65xx SoCs. it supports two usb2.0 ports and
> >>>>> + one usb3.0 port.
> >>>>> +
> >>>>> config PHY_SUN4I_USB
> >>>>> tristate "Allwinner sunxi SoC USB PHY driver"
> >>>>> depends on ARCH_SUNXI && HAS_IOMEM && OF
> >>>>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> >>>>> index f344e1b..3ceff2a 100644
> >>>>> --- a/drivers/phy/Makefile
> >>>>> +++ b/drivers/phy/Makefile
> >>>>> @@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
> >>>>> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> >>>>> obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
> >>>>> obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> >>>>> +obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
> >>>>> obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
> >>>>> obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
> >>>>> obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> >>>>> diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
> >>>>> new file mode 100644
> >>>>> index 0000000..5da4534
> >>>>> --- /dev/null
> >>>>> +++ b/drivers/phy/phy-mt65xx-usb3.c
> >>>>> @@ -0,0 +1,426 @@
> >>>>> +/*
> >>>>> + * Copyright (c) 2015 MediaTek Inc.
> >>>>> + * Author: Chunfeng.Yun <chunfeng.yun@xxxxxxxxxxxx>
> >>>>> + *
> >>>>> + * This software is licensed under the terms of the GNU General Public
> >>>>> + * License version 2, as published by the Free Software Foundation, and
> >>>>> + * may be copied, distributed, and modified under those terms.
> >>>>> + *
> >>>>> + * This program is distributed in the hope that it will be useful,
> >>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >>>>> + * GNU General Public License for more details.
> >>>>> + *
> >>>>> + */
> >>>>> +
> >>>>> +#include <linux/clk.h>
> >>>>> +#include <linux/delay.h>
> >>>>> +#include <linux/io.h>
> >>>>> +#include <linux/module.h>
> >>>>> +#include <linux/of_address.h>
> >>>>> +#include <linux/of_device.h>
> >>>>> +#include <linux/of_gpio.h>
> >>>>> +#include <linux/of.h>
> >>>>> +#include <linux/phy/phy.h>
> >>>>> +#include <linux/platform_device.h>
> >>>>> +#include <linux/pm_runtime.h>
> >>>>> +#include <linux/regulator/consumer.h>
> >>
> >> Lot of these #include are not required. Add only those what are required by
> >> this driver.
> > The dummy header files will be removed later
> >
> >>>>> +#include <linux/resource.h>
> >>>>> +
> >>>>> +/*
> >>>>> + * for sifslv2 register
> >>>>> + * relative to USB3_SIF2_BASE base address
> >>>>> + */
> >>>>> +#define SSUSB_SIFSLV_SPLLC (0x0000)
> >>>>> +#define SSUSB_SIFSLV_U2PHY_COM_BASE (0x0800)
> >>
> >> Looks like all this base address can come from dt.
> > The phy supports multi-ports, and these are sub-segment registers for
> > port0, and other ports can be calculated from the bases. So I think it's
> > better to use the same base address in dts
>
> Nope. Except for the register offsets everything else can come from dt.
> >
> >>>>> +#define SSUSB_SIFSLV_U3PHYD_BASE (0x0900)
> >>>>> +#define SSUSB_USB30_PHYA_SIV_B_BASE (0x0b00)
> >>>>> +#define SSUSB_SIFSLV_U3PHYA_DA_BASE (0x0c00)
> >>>>> +
> >>>>> +/*port1 refs. +0x800(refer to port0)*/
> >>>>> +#define U3P_PORT_INTERVAL (0x800) /*based on port0 */
> >>>>> +#define U3P_PHY_DELTA(index) ((U3P_PORT_INTERVAL) * (index))
> >>>>> +
> >>>>> +#define U3P_USBPHYACR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
> >>>>> +#define PA0_RG_U2PLL_FORCE_ON (0x1 << 15)
> >>>>> +
> >>>>> +#define U3P_USBPHYACR2 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
> >>>>> +#define PA2_RG_SIF_U2PLL_FORCE_EN (0x1 << 18)
> >>>>> +
> >>>>> +#define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
> >>>>> +#define PA5_RG_U2_HSTX_SRCTRL (0x7 << 12)
> >>>>> +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
> >>>>> +#define PA5_RG_U2_HS_100U_U3_EN (0x1 << 11)
> >>>>> +
> >>>>> +#define U3P_USBPHYACR6 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
> >>>>> +#define PA6_RG_U2_ISO_EN (0x1 << 31)
> >>>>> +#define PA6_RG_U2_BC11_SW_EN (0x1 << 23)
> >>>>> +#define PA6_RG_U2_OTG_VBUSCMP_EN (0x1 << 20)
> >>>>> +
> >>>>> +#define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
> >>>>> +#define P2C_RG_USB20_GPIO_CTL (0x1 << 9)
> >>>>> +#define P2C_USB20_GPIO_MODE (0x1 << 8)
> >>>>> +#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
> >>>>> +
> >>>>> +#define U3D_U2PHYDCR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
> >>>>> +#define P2C_RG_SIF_U2PLL_FORCE_ON (0x1 << 24)
> >>>>> +
> >>>>> +#define U3P_U2PHYDTM0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
> >>>>> +#define P2C_FORCE_UART_EN (0x1 << 26)
> >>>>> +#define P2C_FORCE_DATAIN (0x1 << 23)
> >>>>> +#define P2C_FORCE_DM_PULLDOWN (0x1 << 21)
> >>>>> +#define P2C_FORCE_DP_PULLDOWN (0x1 << 20)
> >>>>> +#define P2C_FORCE_XCVRSEL (0x1 << 19)
> >>>>> +#define P2C_FORCE_SUSPENDM (0x1 << 18)
> >>>>> +#define P2C_FORCE_TERMSEL (0x1 << 17)
> >>>>> +#define P2C_RG_DATAIN (0xf << 10)
> >>>>> +#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10)
> >>>>> +#define P2C_RG_DMPULLDOWN (0x1 << 7)
> >>>>> +#define P2C_RG_DPPULLDOWN (0x1 << 6)
> >>>>> +#define P2C_RG_XCVRSEL (0x3 << 4)
> >>>>> +#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4)
> >>>>> +#define P2C_RG_SUSPENDM (0x1 << 3)
> >>>>> +#define P2C_RG_TERMSEL (0x1 << 2)
> >>>>> +#define P2C_DTM0_PART_MASK \
> >>>>> + (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
> >>>>> + P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
> >>>>> + P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
> >>>>> + P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
> >>>>> +
> >>>>> +#define U3P_U2PHYDTM1 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
> >>>>> +#define P2C_RG_UART_EN (0x1 << 16)
> >>>>> +#define P2C_RG_VBUSVALID (0x1 << 5)
> >>>>> +#define P2C_RG_SESSEND (0x1 << 4)
> >>>>> +#define P2C_RG_AVALID (0x1 << 2)
> >>>>> +
> >>>>> +#define U3P_U3_PHYA_REG0 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000)
> >>>>> +#define P3A_RG_U3_VUSB10_ON (1 << 5)
> >>>>> +
> >>>>> +#define U3P_U3_PHYA_REG6 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018)
> >>>>> +#define P3A_RG_TX_EIDLE_CM (0xf << 28)
> >>>>> +#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
> >>>>> +
> >>>>> +#define U3P_U3_PHYA_REG9 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024)
> >>>>> +#define P3A_RG_RX_DAC_MUX (0x1f << 1)
> >>>>> +#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
> >>>>> +
> >>>>> +#define U3P_U3PHYA_DA_REG0 (SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0)
> >>>>> +#define P3A_RG_XTAL_EXT_EN_U3 (0x3 << 10)
> >>>>> +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
> >>>>> +
> >>>>> +#define U3P_PHYD_CDR1 (SSUSB_SIFSLV_U3PHYD_BASE + 0x5c)
> >>>>> +#define P3D_RG_CDR_BIR_LTD1 (0x1f << 24)
> >>>>> +#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
> >>>>> +#define P3D_RG_CDR_BIR_LTD0 (0x1f << 8)
> >>>>> +#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
> >>>>> +
> >>>>> +#define U3P_XTALCTL3 (SSUSB_SIFSLV_SPLLC + 0x18)
> >>>>> +#define XC3_RG_U3_XTAL_RX_PWD (0x1 << 9)
> >>>>> +#define XC3_RG_U3_FRC_XTAL_RX_PWD (0x1 << 8)
> >>>>> +
> >>>>> +#define MT65XX_MAX_PHYS 2
> >>>>> +
> >>>>> +struct mt65xx_phy_instance {
> >>>>> + struct phy *phy;
> >>>>> + u32 index;
> >>>>> + u32 delta; /* increament refers to port0 */
> >>>>> +};
> >>>>> +
> >>>>> +struct mt65xx_u3phy {
> >>>>> + struct device *dev;
> >>>>> + void __iomem *sif_base; /* include sif2 */
> >>>>> + struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
> >>>>> + struct mt65xx_phy_instance phys[MT65XX_MAX_PHYS];
> >>>>> +};
> >>>>> +
> >>>>> +static struct mt65xx_u3phy *to_usbdrd_phy(
> >>>>> + struct mt65xx_phy_instance *instance)
> >>>>> +{
> >>>>> + return container_of((instance), struct mt65xx_u3phy,
> >>>>> + phys[(instance)->index]);
> >>>>> +}
> >>>>> +
> >> .
> >> .
> >> <<snip>>
> >> .
> >> .
> >>
> >>>>> +static struct phy *mt65xx_phy_xlate(struct device *dev,
> >>>>> + struct of_phandle_args *args)
> >>>>> +{
> >>>>> + struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
> >>>>> +
> >>>>> + if (WARN_ON(args->args[0] > MT65XX_MAX_PHYS))
> >>>>> + return ERR_PTR(-ENODEV);
> >>>>> +
> >>>>> + return u3phy->phys[args->args[0]].phy;
> >>>>> +}
> >>
> >> If the driver doesn't have to get any data from dt, then custom xlate is not
> >> required at all. All you have to do is create separate nodes for every
> >> individual phy and keep it as the child node of the phy_provider dt node. Note
> >> that the phy consumer dt node should now use the label given for the chld-nodes
> >> and not the phy_provider. Look at drivers/phy/phy-miphy365x.c for reference.
> >>
> > It is multi-port PHY, and these ports share some registers from offset
> > [0, 0x7ff], and port0 segment is [0x800, 0xfff], port1 segment is
>
> The shared registers can be added in the 'phy_provider' dt node and the port
> specific registers can be added in the sub-node of phy_provider.
> > [0x1000, 0x17ff], etc, so I think maybe it is not suitable to create
> > separate nodes in dts for each port.
>
> Sorry, don't agree with you here.
> > BTW: I refer to phy-exynos5-usbdrd.c which is multi-channel usb3.0 phy
> > to write this driver.
>
> Bad driver to refer to. It was added when phy-core was just merged to the linux
> kernel. And later new features had been added to the phy-core just to better
> support multi-phy phy-providers. If it is not for maintaining old dtbs
> compatibility, that driver would have been changed as well.
>
I know a little about it now, and re-write the driver later.
Thanks a lot for your kindly explanation and guidance:-)
> Thanks
> Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
