Hi,
On Sunday 26 July 2015 08:21 AM, chunfeng yun wrote:
> hi,
> On Wed, 2015-07-22 at 09:21 -0500, Felipe Balbi wrote:
>> Hi,
>>
>> On Wed, Jul 22, 2015 at 10:05:43PM +0800, Chunfeng Yun wrote:
>>> support usb3.0 phy of mt65xx SoCs
>>>
>>> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
>>
>> you missed Kishon here.
>>
> Thank you.
>>> ---
>>> drivers/phy/Kconfig | 9 +
>>> drivers/phy/Makefile | 1 +
>>> drivers/phy/phy-mt65xx-usb3.c | 426 ++++++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 436 insertions(+)
>>> create mode 100644 drivers/phy/phy-mt65xx-usb3.c
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index c0e6ede..019cf8b 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA
>>> help
>>> Support for SATA PHY on Hisilicon hix5hd2 Soc.
>>>
>>> +config PHY_MT65XX_USB3
>>> + tristate "Mediatek USB3.0 PHY Driver"
>>> + depends on ARCH_MEDIATEK && OF
>>> + select GENERIC_PHY
>>> + help
>>> + Say 'Y' here to add support for Mediatek USB3.0 PHY driver
>>> + for mt65xx SoCs. it supports two usb2.0 ports and
>>> + one usb3.0 port.
>>> +
>>> config PHY_SUN4I_USB
>>> tristate "Allwinner sunxi SoC USB PHY driver"
>>> depends on ARCH_SUNXI && HAS_IOMEM && OF
>>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>>> index f344e1b..3ceff2a 100644
>>> --- a/drivers/phy/Makefile
>>> +++ b/drivers/phy/Makefile
>>> @@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
>>> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
>>> obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
>>> obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
>>> +obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
>>> obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
>>> obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
>>> obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
>>> diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
>>> new file mode 100644
>>> index 0000000..5da4534
>>> --- /dev/null
>>> +++ b/drivers/phy/phy-mt65xx-usb3.c
>>> @@ -0,0 +1,426 @@
>>> +/*
>>> + * Copyright (c) 2015 MediaTek Inc.
>>> + * Author: Chunfeng.Yun <chunfeng.yun@xxxxxxxxxxxx>
>>> + *
>>> + * This software is licensed under the terms of the GNU General Public
>>> + * License version 2, as published by the Free Software Foundation, and
>>> + * may be copied, distributed, and modified under those terms.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + */
>>> +
>>> +#include <linux/clk.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/io.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of_address.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/of_gpio.h>
>>> +#include <linux/of.h>
>>> +#include <linux/phy/phy.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/pm_runtime.h>
>>> +#include <linux/regulator/consumer.h>
Lot of these #include are not required. Add only those what are required by
this driver.
>>> +#include <linux/resource.h>
>>> +
>>> +/*
>>> + * for sifslv2 register
>>> + * relative to USB3_SIF2_BASE base address
>>> + */
>>> +#define SSUSB_SIFSLV_SPLLC (0x0000)
>>> +#define SSUSB_SIFSLV_U2PHY_COM_BASE (0x0800)
Looks like all this base address can come from dt.
>>> +#define SSUSB_SIFSLV_U3PHYD_BASE (0x0900)
>>> +#define SSUSB_USB30_PHYA_SIV_B_BASE (0x0b00)
>>> +#define SSUSB_SIFSLV_U3PHYA_DA_BASE (0x0c00)
>>> +
>>> +/*port1 refs. +0x800(refer to port0)*/
>>> +#define U3P_PORT_INTERVAL (0x800) /*based on port0 */
>>> +#define U3P_PHY_DELTA(index) ((U3P_PORT_INTERVAL) * (index))
>>> +
>>> +#define U3P_USBPHYACR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
>>> +#define PA0_RG_U2PLL_FORCE_ON (0x1 << 15)
>>> +
>>> +#define U3P_USBPHYACR2 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
>>> +#define PA2_RG_SIF_U2PLL_FORCE_EN (0x1 << 18)
>>> +
>>> +#define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
>>> +#define PA5_RG_U2_HSTX_SRCTRL (0x7 << 12)
>>> +#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
>>> +#define PA5_RG_U2_HS_100U_U3_EN (0x1 << 11)
>>> +
>>> +#define U3P_USBPHYACR6 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
>>> +#define PA6_RG_U2_ISO_EN (0x1 << 31)
>>> +#define PA6_RG_U2_BC11_SW_EN (0x1 << 23)
>>> +#define PA6_RG_U2_OTG_VBUSCMP_EN (0x1 << 20)
>>> +
>>> +#define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
>>> +#define P2C_RG_USB20_GPIO_CTL (0x1 << 9)
>>> +#define P2C_USB20_GPIO_MODE (0x1 << 8)
>>> +#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
>>> +
>>> +#define U3D_U2PHYDCR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
>>> +#define P2C_RG_SIF_U2PLL_FORCE_ON (0x1 << 24)
>>> +
>>> +#define U3P_U2PHYDTM0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
>>> +#define P2C_FORCE_UART_EN (0x1 << 26)
>>> +#define P2C_FORCE_DATAIN (0x1 << 23)
>>> +#define P2C_FORCE_DM_PULLDOWN (0x1 << 21)
>>> +#define P2C_FORCE_DP_PULLDOWN (0x1 << 20)
>>> +#define P2C_FORCE_XCVRSEL (0x1 << 19)
>>> +#define P2C_FORCE_SUSPENDM (0x1 << 18)
>>> +#define P2C_FORCE_TERMSEL (0x1 << 17)
>>> +#define P2C_RG_DATAIN (0xf << 10)
>>> +#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10)
>>> +#define P2C_RG_DMPULLDOWN (0x1 << 7)
>>> +#define P2C_RG_DPPULLDOWN (0x1 << 6)
>>> +#define P2C_RG_XCVRSEL (0x3 << 4)
>>> +#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4)
>>> +#define P2C_RG_SUSPENDM (0x1 << 3)
>>> +#define P2C_RG_TERMSEL (0x1 << 2)
>>> +#define P2C_DTM0_PART_MASK \
>>> + (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
>>> + P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
>>> + P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
>>> + P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
>>> +
>>> +#define U3P_U2PHYDTM1 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
>>> +#define P2C_RG_UART_EN (0x1 << 16)
>>> +#define P2C_RG_VBUSVALID (0x1 << 5)
>>> +#define P2C_RG_SESSEND (0x1 << 4)
>>> +#define P2C_RG_AVALID (0x1 << 2)
>>> +
>>> +#define U3P_U3_PHYA_REG0 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000)
>>> +#define P3A_RG_U3_VUSB10_ON (1 << 5)
>>> +
>>> +#define U3P_U3_PHYA_REG6 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018)
>>> +#define P3A_RG_TX_EIDLE_CM (0xf << 28)
>>> +#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
>>> +
>>> +#define U3P_U3_PHYA_REG9 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024)
>>> +#define P3A_RG_RX_DAC_MUX (0x1f << 1)
>>> +#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
>>> +
>>> +#define U3P_U3PHYA_DA_REG0 (SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0)
>>> +#define P3A_RG_XTAL_EXT_EN_U3 (0x3 << 10)
>>> +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
>>> +
>>> +#define U3P_PHYD_CDR1 (SSUSB_SIFSLV_U3PHYD_BASE + 0x5c)
>>> +#define P3D_RG_CDR_BIR_LTD1 (0x1f << 24)
>>> +#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
>>> +#define P3D_RG_CDR_BIR_LTD0 (0x1f << 8)
>>> +#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
>>> +
>>> +#define U3P_XTALCTL3 (SSUSB_SIFSLV_SPLLC + 0x18)
>>> +#define XC3_RG_U3_XTAL_RX_PWD (0x1 << 9)
>>> +#define XC3_RG_U3_FRC_XTAL_RX_PWD (0x1 << 8)
>>> +
>>> +#define MT65XX_MAX_PHYS 2
>>> +
>>> +struct mt65xx_phy_instance {
>>> + struct phy *phy;
>>> + u32 index;
>>> + u32 delta; /* increament refers to port0 */
>>> +};
>>> +
>>> +struct mt65xx_u3phy {
>>> + struct device *dev;
>>> + void __iomem *sif_base; /* include sif2 */
>>> + struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
>>> + struct mt65xx_phy_instance phys[MT65XX_MAX_PHYS];
>>> +};
>>> +
>>> +static struct mt65xx_u3phy *to_usbdrd_phy(
>>> + struct mt65xx_phy_instance *instance)
>>> +{
>>> + return container_of((instance), struct mt65xx_u3phy,
>>> + phys[(instance)->index]);
>>> +}
>>> +
.
.
<<snip>>
.
.
>>> +static struct phy *mt65xx_phy_xlate(struct device *dev,
>>> + struct of_phandle_args *args)
>>> +{
>>> + struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
>>> +
>>> + if (WARN_ON(args->args[0] > MT65XX_MAX_PHYS))
>>> + return ERR_PTR(-ENODEV);
>>> +
>>> + return u3phy->phys[args->args[0]].phy;
>>> +}
If the driver doesn't have to get any data from dt, then custom xlate is not
required at all. All you have to do is create separate nodes for every
individual phy and keep it as the child node of the phy_provider dt node. Note
that the phy consumer dt node should now use the label given for the chld-nodes
and not the phy_provider. Look at drivers/phy/phy-miphy365x.c for reference.
Cheers
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
