Hi Daniel,
> btusb currently has a generic match on USB device descriptors:
> { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
>
> However, http://www.usb.org/developers/defined_class states:
>
> Base Class E0h (Wireless Controller)
> This base class is defined for devices that are Wireless controllers.
> Values not shown in the table below are reserved. These class codes are
> to be used in Interface Descriptors, with the exception of the Bluetooth
> class code which can also be used in a Device Descriptor.
>
> Add a match on the interface descriptors accordingly.
>
> This fixes compatibility with the RTL8723AU device shown below.
> This device conforms to the USB Interface Association Descriptor
> specification, which requires the device to have class ef/02/01.
> The extra IAD descriptor then specifies that interfaces 0 and 1
> belong to the same function/driver, which is true. Provided that
> the Bluetooth device class spec accepts use of the IAD, I imagine that
> technically, all btusb devices should be configured like this.
>
> T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0bda ProdID=0724 Rev= 2.00
> S: Manufacturer=Realtek
> S: Product=802.11n WLAN Adapter
> S: SerialNumber=00e04c000001
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723au
> E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us
>
> Signed-off-by: Daniel Drake <drake@xxxxxxxxxxxx>
> ---
> drivers/bluetooth/btusb.c | 1 +
> 1 file changed, 1 insertion(+)
>
> This replaces/obsoletes:
> [PATCH] Bluetooth: btusb: Recognize Realtek shared wifi/bluetooth devices
> [PATCH] Bluetooth: btusb: Add Realtek devices into module device table
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 93339a4..9874aac 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -64,6 +64,7 @@ static struct usb_driver btusb_driver;
> static const struct usb_device_id btusb_table[] = {
> /* Generic Bluetooth USB device */
> { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
> + { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
I moved this into its own line with its own comment before applying your patch.
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
