Re: [PATCH] Bluetooth: btusb: match generic class code in interface descriptor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2015-07-17 at 11:12 -0600, Daniel Drake wrote:
> btusb currently has a generic match on USB device descriptors:
>         { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
> 
> However, http://www.usb.org/developers/defined_class states:
> 
>   Base Class E0h (Wireless Controller)
>   This base class is defined for devices that are Wireless 
> controllers.
>   Values not shown in the table below are reserved. These class codes 
> are
>   to be used in Interface Descriptors, with the exception of the 
> Bluetooth
>   class code which can also be used in a Device Descriptor.
> 
> Add a match on the interface descriptors accordingly.

> This fixes compatibility with the RTL8723AU device shown below.
> This device conforms to the USB Interface Association Descriptor
> specification, which requires the device to have class ef/02/01.
> The extra IAD descriptor then specifies that interfaces 0 and 1
> belong to the same function/driver, which is true. Provided that
> the Bluetooth device class spec accepts use of the IAD, I imagine 
> that
> technically, all btusb devices should be configured like this.

Great, i didn't know whether was allowed hence using the more
conservative _VENDOR_AND_INTERFACE in my patch, but this solution is de
finately nicer.

Tested with a RTL8723AU device on a Radxa Rock Pro board

Reviewed-By: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
Tested-By: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>

> T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
> D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=0bda ProdID=0724 Rev= 2.00
> S:  Manufacturer=Realtek
> S:  Product=802.11n WLAN Adapter
> S:  SerialNumber=00e04c000001
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
> A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff 
> Driver=rtl8723au
> E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
> 
> Signed-off-by: Daniel Drake <drake@xxxxxxxxxxxx>
> ---
>  drivers/bluetooth/btusb.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> This replaces/obsoletes:
>   [PATCH] Bluetooth: btusb: Recognize Realtek shared wifi/bluetooth 
> devices
>   [PATCH] Bluetooth: btusb: Add Realtek devices into module device 
> table
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 93339a4..9874aac 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -64,6 +64,7 @@ static struct usb_driver btusb_driver;
>  static const struct usb_device_id btusb_table[] = {
>  	/* Generic Bluetooth USB device */
>  	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
> +	{ USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
>  
>  	/* Generic Bluetooth AMP device */
>  	{ USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = 
> BTUSB_AMP },

-- 
Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
Collabora Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux