Adding Mathias Nyman (new USB 3.0 maintainer) and the USB mailing list.
On Tue, Jul 21, 2015 at 11:21:18PM +0200, Martin MOKREJŠ wrote:
> Hi Sarah and Alan,
> I bought a new toy: 13port USB 3.0 HUB based on VIAlabs 812 chipset with two power-only charging ports: 1x1.5A and 1x2.4A (AUKEY CB-H16, from Amazon).
>
> I see a lot of complaints when I connect the hub. Would you please check the attached usbmon trace, lsusb and dmesg? It is from 4.1.2 kernel but I have bad experience with 3.10.12 as well. ;-) The usbmon captured from "0u" file shoudl contain when I enabled power on the external hub, then connected one external USB3 drive, later another one but it was not picked up, then I unplugged it and re-plugged (it was detected). Then I did twice 'lsusb -vv' and stopped capturing.
>
>
> I also could not shutdown the computer as it was still looking for the device (SysCtrl+o just printed PowerOff but nothing happened). But let's bother about that later, eventually.
>
> Thank you for your help,
> Martin
> [ 0.000000] Linux version 4.1.2-default-pciehp (root@vostro) (gcc version 4.9.2 (Gentoo 4.9.2 p1.4, pie-0.6.2) ) #2 SMP Tue Jul 14 22:00:22 CEST 2015
> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.2 root=/dev/sda5 ro slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 intel_idle.max_cstate=c3 i915.i915_enable_rc6=1 usbcore.autosuspend=-1
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da4e4fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000da4e5000-0x00000000da527fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000da528000-0x00000000da792fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000da793000-0x00000000da966fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000da967000-0x00000000daa88fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000daa89000-0x00000000dad67fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.6 present.
> [ 0.000000] DMI: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-E7FFF uncachable
> [ 0.000000] E8000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask C00000000 write-back
> [ 0.000000] 1 base 400000000 mask FE0000000 write-back
> [ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
> [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
> [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
> [ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] 8 disabled
> [ 0.000000] 9 disabled
> [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
> [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
> [ 0.000000] e820: last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
> [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
> [ 0.000000] reserving inaccessible SNB gfx pages
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x03179000, 0x03179fff] PGTABLE
> [ 0.000000] BRK [0x0317a000, 0x0317afff] PGTABLE
> [ 0.000000] BRK [0x0317b000, 0x0317bfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x41fc00000-0x41fdfffff]
> [ 0.000000] [mem 0x41fc00000-0x41fdfffff] page 2M
> [ 0.000000] BRK [0x0317c000, 0x0317cfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41fbfffff]
> [ 0.000000] [mem 0x400000000-0x41fbfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3ffffffff]
> [ 0.000000] [mem 0x3e0000000-0x3ffffffff] page 2M
> [ 0.000000] BRK [0x0317d000, 0x0317dfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
> [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x40200000-0xda4e4fff]
> [ 0.000000] [mem 0x40200000-0xda3fffff] page 2M
> [ 0.000000] [mem 0xda400000-0xda4e4fff] page 4k
> [ 0.000000] BRK [0x0317e000, 0x0317efff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0xda528000-0xda792fff]
> [ 0.000000] [mem 0xda528000-0xda792fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xda967000-0xdaa88fff]
> [ 0.000000] [mem 0xda967000-0xdaa88fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3dfffffff]
> [ 0.000000] [mem 0x100000000-0x3dfffffff] page 2M
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v02 DELL )
> [ 0.000000] ACPI: XSDT 0x00000000DAFE8078 000074 (v01 DELL WN09 01072009 AMI 00010013)
> [ 0.000000] ACPI: FACP 0x00000000DAFF1D38 0000F4 (v04 DELL WN09 01072009 AMI 00010013)
> [ 0.000000] ACPI: DSDT 0x00000000DAFE8180 009BB6 (v02 DELL WN09 00000000 INTL 20051117)
> [ 0.000000] ACPI: FACS 0x00000000DAFE3F80 000040
> [ 0.000000] ACPI: APIC 0x00000000DAFF1E30 000072 (v03 DELL WN09 01072009 AMI 00010013)
> [ 0.000000] ACPI: MCFG 0x00000000DAFF1EA8 00003C (v01 DELL WN09 01072009 MSFT 00000097)
> [ 0.000000] ACPI: SSDT 0x00000000DAFF1EE8 0004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
> [ 0.000000] ACPI: SLIC 0x00000000DAFF2398 000176 (v01 DELL WN09 01072009 AMI 00010013)
> [ 0.000000] ACPI: HPET 0x00000000DAFF2510 000038 (v01 DELL WN09 01072009 AMI. 00000004)
> [ 0.000000] ACPI: SSDT 0x00000000DAFF2548 000846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
> [ 0.000000] ACPI: SSDT 0x00000000DAFF2D90 000996 (v01 PmRef CpuPm 00003000 INTL 20051117)
> [ 0.000000] ACPI: DMAR 0x00000000DAFF3728 0000E8 (v01 INTEL SNB 00000001 INTL 00000001)
> [ 0.000000] ACPI: OSFR 0x00000000DAFF3810 000086 (v01 DELL M08 07DE0212 ASL 00000061)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041f3fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
> [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
> [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
> [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000da4e4fff]
> [ 0.000000] node 0: [mem 0x00000000da528000-0x00000000da792fff]
> [ 0.000000] node 0: [mem 0x00000000da967000-0x00000000daa88fff]
> [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
> [ 0.000000] On node 0 totalpages: 4170254
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 156 pages reserved
> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 13906 pages used for memmap
> [ 0.000000] DMA32 zone: 889970 pages, LIFO batch:31
> [ 0.000000] Normal zone: 51192 pages used for memmap
> [ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
> [ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xda4e5000-0xda527fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xda793000-0xda966fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdaa89000-0xdad67fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdad68000-0xdafe7fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdafe8000-0xdaffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
> [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
> [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041fa00000 s96648 r8192 d30328 u524288
> [ 0.000000] pcpu-alloc: s96648 r8192 d30328 u524288 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4104936
> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.2 root=/dev/sda5 ro slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 intel_idle.max_cstate=c3 i915.i915_enable_rc6=1 usbcore.autosuspend=-1
> [ 0.000000] Booting kernel: `c3' invalid for parameter `intel_idle.max_cstate'
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
> [ 0.000000] Memory: 16292184K/16681016K available (10078K kernel code, 1198K rwdata, 4268K rodata, 1076K init, 15572K bss, 388832K reserved, 0K cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Running RCU self tests
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
> [ 0.000000] RCU lockdep checking is enabled.
> [ 0.000000] NR_IRQS:4352 nr_irqs:456 16
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.000000] ... MAX_LOCK_DEPTH: 48
> [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> [ 0.000000] ... CLASSHASH_SIZE: 4096
> [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
> [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
> [ 0.000000] ... CHAINHASH_SIZE: 32768
> [ 0.000000] memory used by lock dependency info: 8159 kB
> [ 0.000000] per task-struct memory footprint: 1920 bytes
> [ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.000000] tsc: Detected 2793.540 MHz processor
> [ 0.000056] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.08 BogoMIPS (lpj=27935400)
> [ 0.000212] pid_max: default: 32768 minimum: 301
> [ 0.000313] ACPI: Core revision 20150410
> [ 0.075469] ACPI: All ACPI Tables successfully acquired
> [ 0.082048] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 0.082129] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 0.083010] CPU: Physical Processor ID: 0
> [ 0.083087] CPU: Processor Core ID: 0
> [ 0.083163] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 0.083242] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> [ 0.083325] mce: CPU supports 7 MCE banks
> [ 0.083410] CPU0: Thermal monitoring enabled (TM1)
> [ 0.083495] process: using mwait in idle threads
> [ 0.083575] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
> [ 0.083653] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
> [ 0.083922] Freeing SMP alternatives memory: 32K (ffffffff8223a000 - ffffffff82242000)
> [ 0.084280] dmar: Host address width 36
> [ 0.084357] dmar: DRHD base: 0x000000fed90000 flags: 0x0
> [ 0.084467] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
> [ 0.084579] dmar: DRHD base: 0x000000fed91000 flags: 0x1
> [ 0.084670] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
> [ 0.084782] dmar: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
> [ 0.084867] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
> [ 0.084953] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
> [ 0.085031] HPET id 0 under DRHD base 0xfed91000
> [ 0.085358] Queued invalidation will be enabled to support x2apic and Intr-remapping.
> [ 0.085488] Enabled IRQ remapping in x2apic mode
> [ 0.085565] x2apic enabled
> [ 0.085643] Switched APIC routing to cluster x2apic.
> [ 0.086347] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.186556] TSC deadline timer enabled
> [ 0.186561] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07)
> [ 0.186832] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
> [ 0.187159] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
> [ 0.187277] ... version: 3
> [ 0.187352] ... bit width: 48
> [ 0.187428] ... generic registers: 4
> [ 0.187504] ... value mask: 0000ffffffffffff
> [ 0.187582] ... max period: 0000ffffffffffff
> [ 0.187659] ... fixed-purpose events: 3
> [ 0.187736] ... event mask: 000000070000000f
> [ 0.188953] x86: Booting SMP configuration:
> [ 0.189032] .... node #0, CPUs: #1 #2 #3
> [ 0.229302] x86: Booted up 1 node, 4 CPUs
> [ 0.229451] smpboot: Total of 4 processors activated (22348.32 BogoMIPS)
> [ 0.232537] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [ 0.233322] devtmpfs: initialized
> [ 0.234642] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes)
> [ 0.234853] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
> [ 0.236228] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> [ 0.236563] xor: automatically using best checksumming function:
> [ 0.326791] avx : 27050.400 MB/sec
> [ 0.326877] pinctrl core: initialized pinctrl subsystem
> [ 0.327515] NET: Registered protocol family 16
> [ 0.356921] cpuidle: using governor ladder
> [ 0.386938] cpuidle: using governor menu
> [ 0.387178] ACPI: bus type PCI registered
> [ 0.387573] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.387689] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> [ 0.388516] PCI: Using configuration type 1 for base access
> [ 0.389132] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
> [ 0.607274] raid6: sse2x1 gen() 7631 MB/s
> [ 0.777512] raid6: sse2x1 xor() 6148 MB/s
> [ 0.947752] raid6: sse2x2 gen() 9447 MB/s
> [ 1.117993] raid6: sse2x2 xor() 6842 MB/s
> [ 1.288238] raid6: sse2x4 gen() 10916 MB/s
> [ 1.458476] raid6: sse2x4 xor() 8210 MB/s
> [ 1.458553] raid6: using algorithm sse2x4 gen() 10916 MB/s
> [ 1.458631] raid6: .... xor() 8210 MB/s, rmw enabled
> [ 1.458708] raid6: using ssse3x2 recovery algorithm
> [ 1.458919] ACPI: Added _OSI(Module Device)
> [ 1.458998] ACPI: Added _OSI(Processor Device)
> [ 1.459074] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 1.459152] ACPI: Added _OSI(Processor Aggregator Device)
> [ 1.470383] ACPI: Executed 1 blocks of module-level executable AML code
> [ 1.505257] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 1.516955] ACPI: Dynamic OEM Table Load:
> [ 1.516967] ACPI: SSDT 0xFFFF88040D21D908 00064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
> [ 1.520916] ACPI: Dynamic OEM Table Load:
> [ 1.520927] ACPI: SSDT 0xFFFF88040D3D3120 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
> [ 1.524177] ACPI: Dynamic OEM Table Load:
> [ 1.524187] ACPI: SSDT 0xFFFF88040D9FF458 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
> [ 1.532094] ACPI: Interpreter enabled
> [ 1.532206] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
> [ 1.532289] ACPI: (supports S0 S1 S3 S4 S5)
> [ 1.532366] ACPI: Using IOAPIC for interrupt routing
> [ 1.532655] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 1.654196] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> [ 1.654289] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [ 1.656312] acpi PNP0A08:00: _OSC: platform does not support [PME]
> [ 1.658205] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
> [ 1.661591] PCI host bridge to bus 0000:00
> [ 1.661671] pci_bus 0000:00: root bus resource [bus 00-3e]
> [ 1.661753] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
> [ 1.661836] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 1.661918] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
> [ 1.662031] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
> [ 1.662144] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
> [ 1.662258] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
> [ 1.662370] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
> [ 1.662483] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
> [ 1.662596] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
> [ 1.662708] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
> [ 1.662821] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
> [ 1.662940] pci_bus 0000:00: scanning bus
> [ 1.662971] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
> [ 1.662978] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10
> [ 1.663623] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
> [ 1.663637] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
> [ 1.663645] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
> [ 1.663651] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
> [ 1.664389] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
> [ 1.664425] pci 0000:00:16.0: reg 0x10: [mem 0xf7e0a000-0xf7e0a00f 64bit]
> [ 1.664555] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [ 1.664581] pci 0000:00:16.0: PME# disabled
> [ 1.665204] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
> [ 1.665234] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e08000-0xf7e083ff]
> [ 1.665378] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 1.665383] pci 0000:00:1a.0: PME# disabled
> [ 1.672852] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 1.673213] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
> [ 1.673247] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit]
> [ 1.673399] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 1.673405] pci 0000:00:1b.0: PME# disabled
> [ 1.673825] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 1.674175] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
> [ 1.674263] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x30
> [ 1.674326] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 1.674331] pci 0000:00:1c.0: PME# disabled
> [ 1.674372] pci 0000:00:1c.0: Disabling UPDCR peer decodes
> [ 1.674457] pci 0000:00:1c.0: Enabling MPC IRBNCE
> [ 1.674536] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
> [ 1.675022] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 1.675373] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
> [ 1.675458] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x30
> [ 1.675518] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 1.675523] pci 0000:00:1c.1: PME# disabled
> [ 1.675558] pci 0000:00:1c.1: Enabling MPC IRBNCE
> [ 1.675637] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
> [ 1.676120] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [ 1.676470] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
> [ 1.676555] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x30
> [ 1.676616] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> [ 1.676622] pci 0000:00:1c.3: PME# disabled
> [ 1.676655] pci 0000:00:1c.3: Enabling MPC IRBNCE
> [ 1.676734] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
> [ 1.677213] pci 0000:00:1c.3: System wakeup disabled by ACPI
> [ 1.677561] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
> [ 1.677646] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x30
> [ 1.677712] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 1.677718] pci 0000:00:1c.4: PME# disabled
> [ 1.677754] pci 0000:00:1c.4: Enabling MPC IRBNCE
> [ 1.677833] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
> [ 1.678312] pci 0000:00:1c.4: System wakeup disabled by ACPI
> [ 1.678663] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
> [ 1.678692] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e07000-0xf7e073ff]
> [ 1.678839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 1.678845] pci 0000:00:1d.0: PME# disabled
> [ 1.685906] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 1.686260] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
> [ 1.687026] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
> [ 1.687059] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
> [ 1.687075] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
> [ 1.687088] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
> [ 1.687103] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
> [ 1.687117] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
> [ 1.687133] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e06000-0xf7e067ff]
> [ 1.687220] pci 0000:00:1f.2: PME# supported from D3hot
> [ 1.687226] pci 0000:00:1f.2: PME# disabled
> [ 1.687864] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
> [ 1.687894] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e05000-0xf7e050ff 64bit]
> [ 1.687936] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
> [ 1.688560] pci_bus 0000:00: fixups for bus
> [ 1.688566] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 0
> [ 1.688754] pci_bus 0000:03: scanning bus
> [ 1.688760] pci_bus 0000:03: fixups for bus
> [ 1.688763] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
> [ 1.688860] pci_bus 0000:03: bus scan returning with max=03
> [ 1.688866] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 0
> [ 1.689050] pci_bus 0000:05: scanning bus
> [ 1.689089] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
> [ 1.689122] pci 0000:05:00.0: reg 0x10: [io 0xe000-0xe0ff]
> [ 1.689169] pci 0000:05:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
> [ 1.689199] pci 0000:05:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
> [ 1.689353] pci 0000:05:00.0: supports D1 D2
> [ 1.689355] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.689361] pci 0000:05:00.0: PME# disabled
> [ 1.689484] pci 0000:05:00.0: System wakeup disabled by ACPI
> [ 1.701764] pci_bus 0000:05: fixups for bus
> [ 1.701780] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
> [ 1.701862] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
> [ 1.701875] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
> [ 1.701877] pci_bus 0000:05: bus scan returning with max=05
> [ 1.701882] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 0
> [ 1.702062] pci_bus 0000:09: scanning bus
> [ 1.702309] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
> [ 1.702513] pci 0000:09:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
> [ 1.703900] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
> [ 1.703951] pci 0000:09:00.0: PME# disabled
> [ 1.704218] pci 0000:09:00.0: System wakeup disabled by ACPI
> [ 1.721907] pci_bus 0000:09: fixups for bus
> [ 1.721910] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
> [ 1.721996] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
> [ 1.722006] pci_bus 0000:09: bus scan returning with max=09
> [ 1.722012] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 0
> [ 1.722194] pci_bus 0000:0b: scanning bus
> [ 1.722235] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
> [ 1.722276] pci 0000:0b:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
> [ 1.722304] pci 0000:0b:00.0: reg 0x18: [mem 0xf7c10000-0xf7c11fff 64bit]
> [ 1.722473] pci 0000:0b:00.0: supports D1 D2
> [ 1.722475] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.722482] pci 0000:0b:00.0: PME# disabled
> [ 1.722610] pci 0000:0b:00.0: System wakeup disabled by ACPI
> [ 1.722973] pci_bus 0000:0b: fixups for bus
> [ 1.722975] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
> [ 1.723062] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
> [ 1.723071] pci_bus 0000:0b: bus scan returning with max=0b
> [ 1.723077] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 1
> [ 1.723088] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 1
> [ 1.723099] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 1
> [ 1.723110] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 1
> [ 1.723119] pci_bus 0000:00: bus scan returning with max=0c
> [ 1.723168] pci_bus 0000:00: on NUMA node 0
> [ 1.726786] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 1.727812] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
> [ 1.728830] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
> [ 1.729851] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
> [ 1.730859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
> [ 1.731982] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
> [ 1.733096] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
> [ 1.734098] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
> [ 1.736369] ACPI: Enabled 4 GPEs in block 00 to 3F
> [ 1.737022] vgaarb: setting as boot device: PCI:0000:00:02.0
> [ 1.737107] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 1.737226] vgaarb: loaded
> [ 1.737300] vgaarb: bridge control possible 0000:00:02.0
> [ 1.737959] SCSI subsystem initialized
> [ 1.738193] libata version 3.00 loaded.
> [ 1.738428] ACPI: bus type USB registered
> [ 1.738677] usbcore: registered new interface driver usbfs
> [ 1.738828] usbcore: registered new interface driver hub
> [ 1.738960] usbcore: registered new device driver usb
> [ 1.739421] EDAC MC: Ver: 3.0.0
> [ 1.740795] wmi: Mapper loaded
> [ 1.741036] Advanced Linux Sound Architecture Driver Initialized.
> [ 1.741182] PCI: Using ACPI for IRQ routing
> [ 1.743367] PCI: pci_cache_line_size set to 64 bytes
> [ 1.743374] pci 0000:00:02.0: BAR 0: reserving [mem 0xf7800000-0xf7bfffff flags 0x140204] (d=0, p=0)
> [ 1.743377] pci 0000:00:02.0: BAR 2: reserving [mem 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0)
> [ 1.743379] pci 0000:00:02.0: BAR 4: reserving [io 0xf000-0xf03f flags 0x40101] (d=0, p=0)
> [ 1.743383] pci 0000:00:16.0: BAR 0: reserving [mem 0xf7e0a000-0xf7e0a00f flags 0x140204] (d=0, p=0)
> [ 1.743388] pci 0000:00:1a.0: BAR 0: reserving [mem 0xf7e08000-0xf7e083ff flags 0x40200] (d=0, p=0)
> [ 1.743392] pci 0000:00:1b.0: BAR 0: reserving [mem 0xf7e00000-0xf7e03fff flags 0x140204] (d=0, p=0)
> [ 1.743401] pci 0000:05:00.0: BAR 0: reserving [io 0xe000-0xe0ff flags 0x40101] (d=0, p=0)
> [ 1.743403] pci 0000:05:00.0: BAR 2: reserving [mem 0xf0004000-0xf0004fff flags 0x14220c] (d=0, p=0)
> [ 1.743405] pci 0000:05:00.0: BAR 4: reserving [mem 0xf0000000-0xf0003fff flags 0x14220c] (d=0, p=0)
> [ 1.743437] pci 0000:09:00.0: BAR 0: reserving [mem 0xf7d00000-0xf7d01fff flags 0x140204] (d=0, p=0)
> [ 1.743446] pci 0000:0b:00.0: BAR 0: reserving [mem 0xf7c00000-0xf7c0ffff flags 0x140204] (d=0, p=0)
> [ 1.743448] pci 0000:0b:00.0: BAR 2: reserving [mem 0xf7c10000-0xf7c11fff flags 0x140204] (d=0, p=0)
> [ 1.743452] pci 0000:00:1d.0: BAR 0: reserving [mem 0xf7e07000-0xf7e073ff flags 0x40200] (d=0, p=0)
> [ 1.743458] pci 0000:00:1f.2: BAR 0: reserving [io 0xf0b0-0xf0b7 flags 0x40101] (d=0, p=0)
> [ 1.743460] pci 0000:00:1f.2: BAR 1: reserving [io 0xf0a0-0xf0a3 flags 0x40101] (d=0, p=0)
> [ 1.743462] pci 0000:00:1f.2: BAR 2: reserving [io 0xf090-0xf097 flags 0x40101] (d=0, p=0)
> [ 1.743464] pci 0000:00:1f.2: BAR 3: reserving [io 0xf080-0xf083 flags 0x40101] (d=0, p=0)
> [ 1.743466] pci 0000:00:1f.2: BAR 4: reserving [io 0xf060-0xf07f flags 0x40101] (d=0, p=0)
> [ 1.743468] pci 0000:00:1f.2: BAR 5: reserving [mem 0xf7e06000-0xf7e067ff flags 0x40200] (d=0, p=0)
> [ 1.743472] pci 0000:00:1f.3: BAR 0: reserving [mem 0xf7e05000-0xf7e050ff flags 0x140204] (d=0, p=0)
> [ 1.743475] pci 0000:00:1f.3: BAR 4: reserving [io 0xf040-0xf05f flags 0x40101] (d=0, p=0)
> [ 1.743536] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
> [ 1.743545] e820: reserve RAM buffer [mem 0xda4e5000-0xdbffffff]
> [ 1.743549] e820: reserve RAM buffer [mem 0xda793000-0xdbffffff]
> [ 1.743553] e820: reserve RAM buffer [mem 0xdaa89000-0xdbffffff]
> [ 1.743557] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
> [ 1.744329] Bluetooth: Core ver 2.20
> [ 1.744436] NET: Registered protocol family 31
> [ 1.744513] Bluetooth: HCI device and connection manager initialized
> [ 1.744606] Bluetooth: HCI socket layer initialized
> [ 1.744689] Bluetooth: L2CAP socket layer initialized
> [ 1.744799] Bluetooth: SCO socket layer initialized
> [ 1.745904] cfg80211: Calling CRDA to update world regulatory domain
> [ 1.746211] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 1.746643] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 1.748782] Switched to clocksource hpet
> [ 1.783948] pnp: PnP ACPI init
> [ 1.784660] system 00:00: [io 0x0680-0x069f] has been reserved
> [ 1.784752] system 00:00: [io 0x1000-0x100f] has been reserved
> [ 1.784836] system 00:00: [io 0xffff] has been reserved
> [ 1.784918] system 00:00: [io 0xffff] has been reserved
> [ 1.785004] system 00:00: [io 0x0400-0x0453] could not be reserved
> [ 1.785089] system 00:00: [io 0x0458-0x047f] has been reserved
> [ 1.785173] system 00:00: [io 0x0500-0x057f] has been reserved
> [ 1.785257] system 00:00: [io 0x164e-0x164f] has been reserved
> [ 1.785356] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.785551] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 1.785911] system 00:02: [io 0x0454-0x0457] has been reserved
> [ 1.785996] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
> [ 1.786274] system 00:03: [io 0x04d0-0x04d1] has been reserved
> [ 1.786360] system 00:03: [mem 0xfe800000-0xfe802fff] has been reserved
> [ 1.786442] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.786678] pnp 00:04: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
> [ 1.786904] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
> [ 1.788741] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 1.788845] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 1.788935] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 1.789021] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 1.789109] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
> [ 1.789196] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 1.789285] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
> [ 1.789373] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
> [ 1.789458] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
> [ 1.789548] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
> [ 1.789635] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
> [ 1.789719] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.791128] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
> [ 1.791214] system 00:07: [mem 0x40000000-0x401fffff] has been reserved
> [ 1.791298] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 1.791579] pnp: PnP ACPI: found 8 devices
> [ 1.806140] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [ 1.806314] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
> [ 1.806411] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
> [ 1.806491] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
> [ 1.806581] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
> [ 1.806701] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
> [ 1.806784] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
> [ 1.806877] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
> [ 1.806961] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
> [ 1.807055] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
> [ 1.807056] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
> [ 1.807058] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
> [ 1.807060] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
> [ 1.807061] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
> [ 1.807063] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
> [ 1.807064] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
> [ 1.807066] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
> [ 1.807068] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
> [ 1.807069] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
> [ 1.807071] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window]
> [ 1.807073] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
> [ 1.807074] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
> [ 1.807076] pci_bus 0000:09: resource 1 [mem 0xf7d00000-0xf7dfffff]
> [ 1.807078] pci_bus 0000:0b: resource 1 [mem 0xf7c00000-0xf7cfffff]
> [ 1.807188] NET: Registered protocol family 2
> [ 1.807720] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 1.808017] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
> [ 1.811224] TCP: Hash tables configured (established 131072 bind 65536)
> [ 1.811405] UDP hash table entries: 8192 (order: 8, 1310720 bytes)
> [ 1.812311] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes)
> [ 1.813391] NET: Registered protocol family 1
> [ 1.813802] RPC: Registered named UNIX socket transport module.
> [ 1.813883] RPC: Registered udp transport module.
> [ 1.813960] RPC: Registered tcp transport module.
> [ 1.814037] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 1.814132] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe0
> [ 1.814135] pci 0000:00:02.0: Video device with shadowed ROM
> [ 1.814143] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x700
> [ 1.939685] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x700
> [ 2.059849] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x700
> [ 2.060820] PCI: CLS 64 bytes, default 64
> [ 2.061100] DMAR: No ATSR found
> [ 2.061365] IOMMU: dmar0 using Queued invalidation
> [ 2.061444] IOMMU: dmar1 using Queued invalidation
> [ 2.061524] IOMMU: Setting RMRR:
> [ 2.061680] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
> [ 2.062160] IOMMU: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff]
> [ 2.062315] IOMMU: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff]
> [ 2.062440] IOMMU: Prepare 0-16MiB unity mapping for LPC
> [ 2.062542] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
> [ 2.062940] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
> [ 2.067177] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
> [ 2.067292] hw unit of domain pp0-core 2^-16 Joules
> [ 2.067370] hw unit of domain package 2^-16 Joules
> [ 2.067447] hw unit of domain pp1-gpu 2^-16 Joules
> [ 2.067842] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
> [ 2.067939] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
> [ 2.068036] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
> [ 2.068134] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
> [ 2.068454] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
> [ 2.072634] AVX version of gcm_enc/dec engaged.
> [ 2.072713] AES CTR mode by8 optimization enabled
> [ 2.073719] sha1_ssse3: Using AVX optimized SHA-1 implementation
> [ 2.073915] sha256_ssse3: Using AVX optimized SHA-256 implementation
> [ 2.074105] sha512_ssse3: Using AVX optimized SHA-512 implementation
> [ 2.078120] futex hash table entries: 1024 (order: 5, 131072 bytes)
> [ 2.078318] audit: initializing netlink subsys (disabled)
> [ 2.078444] audit: type=2000 audit(1437519714.060:1): initialized
> [ 2.079948] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 2.104127] zpool: loaded
> [ 2.115617] NET: Registered protocol family 38
> [ 2.115762] Key type asymmetric registered
> [ 2.115853] Asymmetric key parser 'x509' registered
> [ 2.116157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 2.116295] io scheduler noop registered
> [ 2.116376] io scheduler deadline registered (default)
> [ 2.116824] io scheduler cfq registered
> [ 2.116911] start plist test
> [ 2.118192] end plist test
> [ 2.120776] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 2.121043] pciehp: pcie_port_service_register = 0
> [ 2.121046] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 2.121241] intel_idle: MWAIT substates: 0x21120
> [ 2.121243] intel_idle: v0.4 model 0x2A
> [ 2.121245] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 2.123480] ACPI: AC Adapter [AC] (on-line)
> [ 2.123921] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
> [ 2.125478] ACPI: Lid Switch [LID0]
> [ 2.125792] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
> [ 2.125948] ACPI: Power Button [PWRB]
> [ 2.126256] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
> [ 2.126386] ACPI: Sleep Button [SBTN]
> [ 2.126696] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> [ 2.126824] ACPI: Power Button [PWRF]
> [ 2.156672] thermal LNXTHERM:00: registered as thermal_zone0
> [ 2.156754] ACPI: Thermal Zone [THM] (69 C)
> [ 2.157054] GHES: HEST is not enabled!
> [ 2.157141] ERST DBG: ERST support is disabled.
> [ 2.197548] ACPI: Battery Slot [BAT0] (battery present)
> [ 2.239417] Non-volatile memory driver v1.3
> [ 2.249789] Linux agpgart interface v0.103
> [ 2.249953] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
> [ 2.250022] [drm] Initialized drm 1.1.0 20060810
> [ 2.253478] [drm] Memory usable by graphics device = 2048M
> [ 2.253557] [drm] VT-d active for gfx access
> [ 2.253635] [drm] Disabling PPGTT because VT-d is on
> [ 2.253738] [drm] Replacing VGA console driver
> [ 2.254527] Console: switching to colour dummy device 80x25
> [ 2.263776] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 2.263783] [drm] Driver supports precise vblank timestamp query.
> [ 2.263848] [drm] DMAR active, disabling use of stolen memory
> [ 2.264257] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 2.292888] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 2.296084] acpi device:34: registered as cooling_device4
> [ 2.296697] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
> [ 2.296849] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
> [ 2.307590] loop: module loaded
> [ 2.319690] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254)
> [ 2.319701] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 2.319720] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
> [ 2.319725] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 2.319736] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
> [ 2.319740] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 2.319751] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
> [ 2.319755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 2.319762] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 2.319886] Loading iSCSI transport class v2.0-870.
> [ 2.321317] ahci 0000:00:1f.2: version 3.0
> [ 2.322215] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
> [ 2.322248] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
> [ 2.322260] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
> [ 2.328154] scsi host0: ahci
> [ 2.329331] scsi host1: ahci
> [ 2.329913] scsi host2: ahci
> [ 2.330497] scsi host3: ahci
> [ 2.331084] scsi host4: ahci
> [ 2.331663] scsi host5: ahci
> [ 2.332086] ata1: SATA max UDMA/133 abar m2048@0xf7e06000 port 0xf7e06100 irq 28
> [ 2.332096] ata2: DUMMY
> [ 2.332101] ata3: DUMMY
> [ 2.332106] ata4: DUMMY
> [ 2.332110] ata5: DUMMY
> [ 2.332115] ata6: DUMMY
> [ 2.332581] tun: Universal TUN/TAP device driver, 1.6
> [ 2.332588] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> [ 2.332949] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 2.333266] r8169 0000:05:00.0: enabling Mem-Wr-Inval
> [ 2.334407] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc90000030000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 29
> [ 2.334420] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
> [ 2.334543] VMware vmxnet3 virtual NIC driver - version 1.3.5.0-k-NAPI
> [ 2.334727] usbcore: registered new interface driver cdc_ether
> [ 2.334802] usbcore: registered new interface driver cdc_eem
> [ 2.334918] usbcore: registered new interface driver cdc_ncm
> [ 2.334996] usbcore: registered new interface driver huawei_cdc_ncm
> [ 2.335069] usbcore: registered new interface driver qmi_wwan
> [ 2.335145] usbcore: registered new interface driver cdc_mbim
> [ 2.335572] xhci_hcd 0000:0b:00.0: enabling bus mastering
> [ 2.335619] xhci_hcd 0000:0b:00.0: xHCI Host Controller
> [ 2.335790] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 1
> [ 2.336195] xhci_hcd 0000:0b:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x00000000
> [ 2.336224] xhci_hcd 0000:0b:00.0: enabling Mem-Wr-Inval
> [ 2.337336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 2.337345] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.337355] usb usb1: Product: xHCI Host Controller
> [ 2.337362] usb usb1: Manufacturer: Linux 4.1.2-default-pciehp xhci-hcd
> [ 2.337369] usb usb1: SerialNumber: 0000:0b:00.0
> [ 2.338743] hub 1-0:1.0: USB hub found
> [ 2.338822] hub 1-0:1.0: 2 ports detected
> [ 2.340009] xhci_hcd 0000:0b:00.0: xHCI Host Controller
> [ 2.340023] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 2
> [ 2.340336] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
> [ 2.340342] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.340348] usb usb2: Product: xHCI Host Controller
> [ 2.340353] usb usb2: Manufacturer: Linux 4.1.2-default-pciehp xhci-hcd
> [ 2.340357] usb usb2: SerialNumber: 0000:0b:00.0
> [ 2.341226] hub 2-0:1.0: USB hub found
> [ 2.341286] hub 2-0:1.0: 2 ports detected
> [ 2.342020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.342032] ehci-pci: EHCI PCI platform driver
> [ 2.342660] ehci-pci 0000:00:1a.0: enabling bus mastering
> [ 2.342684] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 2.342710] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
> [ 2.342737] ehci-pci 0000:00:1a.0: debug port 2
> [ 2.346695] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 2.346751] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e08000
> [ 2.359695] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 2.359946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
> [ 2.359952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.359958] usb usb3: Product: EHCI Host Controller
> [ 2.359963] usb usb3: Manufacturer: Linux 4.1.2-default-pciehp ehci_hcd
> [ 2.359967] usb usb3: SerialNumber: 0000:00:1a.0
> [ 2.360921] hub 3-0:1.0: USB hub found
> [ 2.360967] hub 3-0:1.0: 2 ports detected
> [ 2.362398] ehci-pci 0000:00:1d.0: enabling bus mastering
> [ 2.362416] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 2.362439] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
> [ 2.362466] ehci-pci 0000:00:1d.0: debug port 2
> [ 2.366403] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 2.366471] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e07000
> [ 2.379830] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 2.380062] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
> [ 2.380068] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.380075] usb usb4: Product: EHCI Host Controller
> [ 2.380079] usb usb4: Manufacturer: Linux 4.1.2-default-pciehp ehci_hcd
> [ 2.380084] usb usb4: SerialNumber: 0000:00:1d.0
> [ 2.381014] hub 4-0:1.0: USB hub found
> [ 2.381080] hub 4-0:1.0: 2 ports detected
> [ 2.381829] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 2.381853] ohci-pci: OHCI PCI platform driver
> [ 2.381919] uhci_hcd: USB Universal Host Controller Interface driver
> [ 2.382274] usbcore: registered new interface driver cdc_wdm
> [ 2.382421] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
> [ 2.385077] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 2.385130] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 2.386187] mousedev: PS/2 mouse device common for all mice
> [ 2.388081] rtc_cmos 00:01: RTC can wake from S4
> [ 2.388254] rtc rtc0: alarm rollover: day
> [ 2.388460] rtc rtc0: rtc_cmos: dev (254:0)
> [ 2.388479] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> [ 2.388538] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> [ 2.388578] i2c /dev entries driver
> [ 2.397037] fbcon: inteldrmfb (fb0) is primary device
> [ 2.398902] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
> [ 2.398905] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 2.399708] coretemp coretemp.0: TjMax is 100 degrees C
> [ 2.399755] coretemp coretemp.0: TjMax is 100 degrees C
> [ 2.399848] coretemp coretemp.0: TjMax is 100 degrees C
> [ 2.400235] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> [ 2.400317] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
> [ 2.400855] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 2.400907] iTCO_vendor_support: vendor-support=0
> [ 2.400914] md: linear personality registered for level -1
> [ 2.400934] md: raid0 personality registered for level 0
> [ 2.400940] md: raid1 personality registered for level 1
> [ 2.400945] md: raid10 personality registered for level 10
> [ 2.401143] md: raid6 personality registered for level 6
> [ 2.401144] md: raid5 personality registered for level 5
> [ 2.401145] md: raid4 personality registered for level 4
> [ 2.401949] device-mapper: uevent: version 1.0.3
> [ 2.402549] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@xxxxxxxxxx
> [ 2.403285] Intel P-state driver initializing.
> [ 2.413843] hidraw: raw HID events driver (C) Jiri Kosina
> [ 2.416405] usbcore: registered new interface driver usbhid
> [ 2.416408] usbhid: USB HID core driver
> [ 2.417797] input: Dell WMI hotkeys as /devices/virtual/input/input6
> [ 2.424553] NET: Registered protocol family 17
> [ 2.426047] Bluetooth: RFCOMM TTY layer initialized
> [ 2.426068] Bluetooth: RFCOMM socket layer initialized
> [ 2.426097] Bluetooth: RFCOMM ver 1.11
> [ 2.426144] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 2.426146] Bluetooth: BNEP filters: protocol multicast
> [ 2.426198] Bluetooth: BNEP socket layer initialized
> [ 2.426218] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> [ 2.426237] Bluetooth: HIDP socket layer initialized
> [ 2.426511] Key type dns_resolver registered
> [ 2.430790] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
> [ 2.433593] registered taskstats version 1
> [ 2.436124] Key type encrypted registered
> [ 2.438848] rtc_cmos 00:01: setting system clock to 2015-07-21 23:01:54 UTC (1437519714)
> [ 2.438860] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 2.438861] EDD information not available.
> [ 2.440624] PM: Checking hibernation image partition /dev/sda6
> [ 2.462315] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD87B1/3: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
> [ 2.462319] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 2.462322] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
> [ 2.462324] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
> [ 2.462326] snd_hda_codec_idt hdaudioC0D0: inputs:
> [ 2.511764] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> [ 2.517496] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> [ 2.518572] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 2.680039] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 2.680221] usb 3-1: new high-speed USB device number 2 using ehci-pci
> [ 2.692583] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [ 2.692815] ata1.00: ATA-8: ST2000LM003 HN-M201RAD, 2BC10001, max UDMA/133
> [ 2.692818] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [ 2.704758] usb 4-1: new high-speed USB device number 2 using ehci-pci
> [ 2.704826] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [ 2.705009] ata1.00: configured for UDMA/133
> [ 2.831276] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
> [ 2.831281] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 2.833841] hub 3-1:1.0: USB hub found
> [ 2.834134] hub 3-1:1.0: 6 ports detected
> [ 2.850979] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
> [ 2.850983] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 2.852787] hub 4-1:1.0: USB hub found
> [ 2.852989] hub 4-1:1.0: 8 ports detected
> [ 3.060682] tsc: Refined TSC clocksource calibration: 2793.653 MHz
> [ 3.060689] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2844d4ef8cd, max_idle_ns: 440795255620 ns
> [ 3.420170] Console: switching to colour frame buffer device 170x48
> [ 3.492435] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 3.493870] i915 0000:00:02.0: registered panic notifier
> [ 3.522900] scsi 0:0:0:0: Direct-Access ATA ST2000LM003 HN-M 0001 PQ: 0 ANSI: 5
> [ 3.528761] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
> [ 3.530569] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 3.533691] sd 0:0:0:0: [sda] 4096-byte physical blocks
> [ 3.536095] sd 0:0:0:0: [sda] Write Protect is off
> [ 3.538122] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.538244] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 3.611798] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> [ 3.620558] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 3.709319] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input12
> [ 3.727174] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
> [ 3.733697] PM: Hibernation image partition 8:6 present
> [ 3.733704] PM: Looking for hibernation image.
> [ 3.734541] PM: Image not found (code -22)
> [ 3.734546] PM: Hibernation image not present or could not be loaded.
> [ 3.734622] ALSA device list:
> [ 3.736951] #0: HDA Intel PCH at 0xf7e00000 irq 35
> [ 3.739916] md: Waiting for all devices to be available before autodetect
> [ 3.742329] md: If you don't use raid, use raid=noautodetect
> [ 3.747071] md: Autodetecting RAID arrays.
> [ 3.749205] md: Scanned 0 and added 0 devices.
> [ 3.751335] md: autorun ...
> [ 3.753270] md: ... autorun DONE.
> [ 3.783193] EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240)
> [ 4.005685] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
> [ 4.006640] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
> [ 4.035583] devtmpfs: mounted
> [ 4.036862] Freeing unused kernel memory: 1076K (ffffffff8212d000 - ffffffff8223a000)
> [ 4.037799] Write protecting the kernel read-only data: 16384k
> [ 4.039054] Freeing unused kernel memory: 148K (ffff8800019db000 - ffff880001a00000)
> [ 4.040527] Freeing unused kernel memory: 1876K (ffff880001e2b000 - ffff880002000000)
> [ 4.061948] Switched to clocksource tsc
> [ 4.902896] cfg80211: Calling CRDA to update world regulatory domain
> [ 6.470830] random: nonblocking pool is initialized
> [ 8.066667] cfg80211: Calling CRDA to update world regulatory domain
> [ 8.512384] r8169 0000:05:00.0 enp5s0: renamed from eth0
> [ 8.800260] Intel(R) Wireless WiFi driver for Linux
> [ 8.800262] Copyright(c) 2003- 2015 Intel Corporation
> [ 8.875887] iwlwifi 0000:09:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
> [ 10.241207] cfg80211: World regulatory domain updated:
> [ 10.241218] cfg80211: DFS Master region: unset
> [ 10.241222] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 10.241228] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 10.241233] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
> [ 10.241237] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
> [ 10.241243] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
> [ 10.241248] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
> [ 10.241253] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
> [ 10.241257] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
> [ 10.241261] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
> [ 10.527178] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG disabled
> [ 10.527190] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
> [ 10.527195] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
> [ 10.527203] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
> [ 10.527447] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled
> [ 10.535247] iwlwifi 0000:09:00.0: RF_KILL bit toggled to disable radio.
> [ 10.551281] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
> [ 10.628108] iwlwifi 0000:09:00.0 wlp9s0: renamed from wlan0
> [ 12.368581] EXT4-fs (sda5): re-mounted. Opts: (null)
> [ 12.842748] Adding 16776188k swap on /dev/sda6. Priority:-1 extents:1 across:16776188k FS
> [ 13.440216] fuse init (API version 7.23)
> [ 17.253116] r8169 0000:05:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
> [ 17.253127] r8169 0000:05:00.0 enp5s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
> [ 17.282154] r8169 0000:05:00.0 enp5s0: link down
> [ 17.282278] r8169 0000:05:00.0 enp5s0: link down
> [ 17.663096] ------------[ cut here ]------------
> [ 17.663109] WARNING: CPU: 2 PID: 3011 at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x1e2/0x1f0()
> [ 17.663112] wlp9s0: Failed check-sdata-in-driver check, flags: 0x0
> [ 17.663114] Modules linked in: fuse x86_pkg_temp_thermal intel_powerclamp iwldvm kvm_intel kvm iwlwifi dell_smo8800
> [ 17.663127] CPU: 2 PID: 3011 Comm: iwconfig Not tainted 4.1.2-default-pciehp #2
> [ 17.663129] Hardware name: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014
> [ 17.663132] ffffffff81dadc75 ffff880409487b68 ffffffff819c6a7d ffffffff81128822
> [ 17.663136] ffff880409487bb8 ffff880409487ba8 ffffffff810d2f05 0000000000000000
> [ 17.663140] 0000000000040000 ffff8804095189e0 ffff8800da0d29e0 ffff880409518460
> [ 17.663144] Call Trace:
> [ 17.663150] [<ffffffff819c6a7d>] dump_stack+0x45/0x57
> [ 17.663154] [<ffffffff81128822>] ? console_unlock+0x282/0x4a0
> [ 17.663159] [<ffffffff810d2f05>] warn_slowpath_common+0x85/0xc0
> [ 17.663162] [<ffffffff810d2f81>] warn_slowpath_fmt+0x41/0x50
> [ 17.663165] [<ffffffff8195b1d2>] ieee80211_bss_info_change_notify+0x1e2/0x1f0
> [ 17.663169] [<ffffffff81974afd>] ieee80211_recalc_txpower+0x2d/0x40
> [ 17.663174] [<ffffffff8197bab7>] ieee80211_set_tx_power+0x47/0x1a0
> [ 17.663177] [<ffffffff81955bea>] cfg80211_wext_siwtxpower+0xaa/0x1d0
> [ 17.663180] [<ffffffff81958b9f>] ioctl_standard_call+0x4f/0xe0
> [ 17.663183] [<ffffffff81958b50>] ? ioctl_standard_iw_point+0x3a0/0x3a0
> [ 17.663186] [<ffffffff8195873d>] wireless_process_ioctl.constprop.9+0x8d/0x100
> [ 17.663189] [<ffffffff81958ddd>] wext_handle_ioctl+0x5d/0xb0
> [ 17.663194] [<ffffffff81806fd9>] dev_ioctl+0x339/0x6f0
> [ 17.663199] [<ffffffff817ce2a2>] sock_ioctl+0x142/0x2e0
> [ 17.663204] [<ffffffff81210968>] do_vfs_ioctl+0x2f8/0x530
> [ 17.663207] [<ffffffff8121c4a4>] ? __fget_light+0x64/0x90
> [ 17.663210] [<ffffffff81210bdc>] SyS_ioctl+0x3c/0x80
> [ 17.663215] [<ffffffff819d279b>] system_call_fastpath+0x16/0x73
> [ 17.663218] ---[ end trace ce89df334bd17fbe ]---
> [ 19.056492] r8169 0000:05:00.0 enp5s0: link up
> [ 23.046129] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
> [ 23.046818] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
> [ 23.047371] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
> [ 23.047798] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
> [ 23.048384] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
> [ 23.048795] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
> [ 23.049340] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
> [ 23.049753] microcode: CPU3 updated to revision 0x29, date = 2013-06-12
> [ 23.049764] perf_event_intel: PEBS enabled due to microcode update
> [ 29.788591] pbs_mom (3496): /proc/3496/oom_adj is deprecated, please use /proc/3496/oom_score_adj instead.
> [ 32.587282] intel_pstate CPU 2 exiting
> [ 32.619032] kvm: disabling virtualization on CPU2
> [ 32.619799] smpboot: CPU 2 is now offline
> [ 32.757411] intel_pstate CPU 3 exiting
> [ 32.798788] kvm: disabling virtualization on CPU3
> [ 32.798821] smpboot: CPU 3 is now offline
> [ 62.855296] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
> [ 63.035025] usb 1-1: new high-speed USB device number 2 using xhci_hcd
> [ 63.109937] usb 2-1: New USB device found, idVendor=2109, idProduct=0812
> [ 63.109941] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 63.109942] usb 2-1: Product: USB3.0 Hub
> [ 63.109944] usb 2-1: Manufacturer: VIA Labs, Inc.
> [ 63.121789] hub 2-1:1.0: USB hub found
> [ 63.122271] hub 2-1:1.0: 4 ports detected
> [ 63.180232] usb 1-1: New USB device found, idVendor=2109, idProduct=2812
> [ 63.180236] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 63.180238] usb 1-1: Product: USB2.0 Hub
> [ 63.180239] usb 1-1: Manufacturer: VIA Labs, Inc.
> [ 63.185922] hub 1-1:1.0: USB hub found
> [ 63.186482] hub 1-1:1.0: 4 ports detected
> [ 63.486158] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
> [ 63.509717] usb 2-1.1: new SuperSpeed USB device number 3 using xhci_hcd
> [ 63.602018] usb 1-1.1: New USB device found, idVendor=2109, idProduct=2812
> [ 63.602022] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 63.602024] usb 1-1.1: Product: USB2.0 Hub
> [ 63.602025] usb 1-1.1: Manufacturer: VIA Labs, Inc.
> [ 63.634272] hub 1-1.1:1.0: USB hub found
> [ 63.635051] hub 1-1.1:1.0: 4 ports detected
> [ 63.736327] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
> [ 63.760879] usb 2-1.1: New USB device found, idVendor=2109, idProduct=0812
> [ 63.760883] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 63.760885] usb 2-1.1: Product: USB3.0 Hub
> [ 63.760886] usb 2-1.1: Manufacturer: VIA Labs, Inc.
> [ 63.778396] hub 2-1.1:1.0: USB hub found
> [ 63.778827] hub 2-1.1:1.0: 4 ports detected
> [ 63.852184] usb 1-1.3: New USB device found, idVendor=2109, idProduct=2812
> [ 63.852188] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 63.852189] usb 1-1.3: Product: USB2.0 Hub
> [ 63.852190] usb 1-1.3: Manufacturer: VIA Labs, Inc.
> [ 63.858200] hub 1-1.3:1.0: USB hub found
> [ 63.858666] hub 1-1.3:1.0: 4 ports detected
> [ 63.859221] usb 2-1.3: new SuperSpeed USB device number 4 using xhci_hcd
> [ 63.956739] usb 1-1.4: new high-speed USB device number 5 using xhci_hcd
> [ 64.072299] usb 1-1.4: New USB device found, idVendor=2109, idProduct=2812
> [ 64.072303] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 64.072304] usb 1-1.4: Product: USB2.0 Hub
> [ 64.072306] usb 1-1.4: Manufacturer: VIA Labs, Inc.
> [ 64.082735] hub 1-1.4:1.0: USB hub found
> [ 64.083489] hub 1-1.4:1.0: 4 ports detected
> [ 64.111145] usb 2-1.3: New USB device found, idVendor=2109, idProduct=0812
> [ 64.111149] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 64.111150] usb 2-1.3: Product: USB3.0 Hub
> [ 64.111152] usb 2-1.3: Manufacturer: VIA Labs, Inc.
> [ 64.114561] hub 2-1.3:1.0: USB hub found
> [ 64.115060] hub 2-1.3:1.0: 4 ports detected
> [ 64.200338] usb 2-1.4: new SuperSpeed USB device number 5 using xhci_hcd
> [ 64.451502] usb 2-1.4: New USB device found, idVendor=2109, idProduct=0812
> [ 64.451506] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 64.451507] usb 2-1.4: Product: USB3.0 Hub
> [ 64.451509] usb 2-1.4: Manufacturer: VIA Labs, Inc.
> [ 64.467288] hub 2-1.4:1.0: USB hub found
> [ 64.467698] hub 2-1.4:1.0: 4 ports detected
> [ 101.817396] usb 2-1.3.1: new SuperSpeed USB device number 6 using xhci_hcd
> [ 101.839720] usb 2-1.3.1: New USB device found, idVendor=174c, idProduct=5106
> [ 101.839724] usb 2-1.3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> [ 101.839725] usb 2-1.3.1: Product: AS2105
> [ 101.839727] usb 2-1.3.1: Manufacturer: ASMedia
> [ 101.839728] usb 2-1.3.1: SerialNumber: Z1F09686
> [ 101.930797] usb-storage 2-1.3.1:1.0: USB Mass Storage device detected
> [ 101.931011] scsi host6: usb-storage 2-1.3.1:1.0
> [ 101.931446] usbcore: registered new interface driver usb-storage
> [ 101.934105] usbcore: registered new interface driver uas
> [ 102.926240] scsi 6:0:0:0: Direct-Access ST3000DM 001-9YN166 CC4H PQ: 0 ANSI: 5
> [ 102.927688] sd 6:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
> [ 102.927896] sd 6:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
> [ 102.927916] sd 6:0:0:0: Attached scsi generic sg1 type 0
> [ 102.929532] sd 6:0:0:0: [sdb] Write Protect is off
> [ 102.929534] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
> [ 102.931228] sd 6:0:0:0: [sdb] No Caching mode page found
> [ 102.931230] sd 6:0:0:0: [sdb] Assuming drive cache: write through
> [ 102.932213] sd 6:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
> [ 102.953575] sdb: sdb1
> [ 102.954843] sd 6:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
> [ 102.956163] sd 6:0:0:0: [sdb] Attached SCSI disk
> [ 103.311186] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
> [ 223.550400] usb 2-1.4: USB disconnect, device number 5
> [ 223.675333] usb 1-1.4: USB disconnect, device number 5
> [ 224.429593] usb 2-1.4: new SuperSpeed USB device number 7 using xhci_hcd
> [ 224.680087] usb 2-1.4: New USB device found, idVendor=2109, idProduct=0812
> [ 224.680091] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 224.680092] usb 2-1.4: Product: USB3.0 Hub
> [ 224.680094] usb 2-1.4: Manufacturer: VIA Labs, Inc.
> [ 224.685311] hub 2-1.4:1.0: USB hub found
> [ 224.685581] hub 2-1.4:1.0: 4 ports detected
> [ 224.786106] usb 1-1.4: new high-speed USB device number 7 using xhci_hcd
> [ 224.901479] usb 1-1.4: New USB device found, idVendor=2109, idProduct=2812
> [ 224.901483] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 224.901485] usb 1-1.4: Product: USB2.0 Hub
> [ 224.901486] usb 1-1.4: Manufacturer: VIA Labs, Inc.
> [ 224.925636] hub 1-1.4:1.0: USB hub found
> [ 224.926255] hub 1-1.4:1.0: 4 ports detected
> [ 225.069912] usb 2-1.4.3: new SuperSpeed USB device number 8 using xhci_hcd
> [ 225.092445] usb 2-1.4.3: New USB device found, idVendor=174c, idProduct=55aa
> [ 225.092460] usb 2-1.4.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> [ 225.092461] usb 2-1.4.3: Product: ASMT1053
> [ 225.092463] usb 2-1.4.3: Manufacturer: asmedia
> [ 225.092464] usb 2-1.4.3: SerialNumber: 123456789012
> [ 225.093463] usb-storage 2-1.4.3:1.0: USB Mass Storage device detected
> [ 225.093893] usb-storage 2-1.4.3:1.0: Quirks match for vid 174c pid 55aa: 400000
> [ 225.093967] scsi host7: usb-storage 2-1.4.3:1.0
> [ 226.087972] scsi 7:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6
> [ 226.089093] sd 7:0:0:0: Attached scsi generic sg2 type 0
> [ 226.089840] sd 7:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
> [ 226.089843] sd 7:0:0:0: [sdc] 4096-byte physical blocks
> [ 226.090383] sd 7:0:0:0: [sdc] Write Protect is off
> [ 226.090386] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
> [ 226.090866] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 226.174696] sdc: sdc1
> [ 226.177969] sd 7:0:0:0: [sdc] Attached SCSI disk
> [ 226.609145] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
>
> Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x8087 Intel Corp.
> idProduct 0x0024 Integrated Rate Matching Hub
> bcdDevice 0.00
> iManufacturer 0
> iProduct 0
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 12
> Hub Descriptor:
> bLength 11
> bDescriptorType 41
> nNbrPorts 8
> wHubCharacteristic 0x0009
> Per-port power switching
> Per-port overcurrent protection
> TT think time 8 FS bits
> bPwrOn2PwrGood 50 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00 0x00
> PortPwrCtrlMask 0xff 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Port 5: 0000.0100 power
> Port 6: 0000.0100 power
> Port 7: 0000.0100 power
> Port 8: 0000.0100 power
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0001
> Self Powered
>
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 4.01
> iManufacturer 3 Linux 4.1.2-default-pciehp ehci_hcd
> iProduct 2 EHCI Host Controller
> iSerial 1 0000:00:1d.0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x02
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0507 highspeed power suspend enable connect
> Port 2: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 008: ID 174c:55aa ASMedia Technology Inc. ASM1051 SATA 3Gb/s bridge
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 9
> idVendor 0x174c ASMedia Technology Inc.
> idProduct 0x55aa ASM1051 SATA 3Gb/s bridge
> bcdDevice 1.00
> iManufacturer 2 asmedia
> iProduct 3 ASMT1053
> iSerial 1 123456789012
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 44
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xc0
> Self Powered
> MaxPower 36mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8 Mass Storage
> bInterfaceSubClass 6 SCSI
> bInterfaceProtocol 80 Bulk-Only
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 15
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 15
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 22
> bNumDeviceCaps 2
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 10 micro seconds
> bU2DevExitLat 2047 micro seconds
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 007: ID 2109:0812
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 3
> bMaxPacketSize0 9
> idVendor 0x2109
> idProduct 0x0812
> bcdDevice b.e1
> iManufacturer 1 VIA Labs, Inc.
> iProduct 2 USB3.0 Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 31
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 19
> Transfer Type Interrupt
> Synch Type None
> Usage Type Feedback
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 8
> bMaxBurst 0
> Hub Descriptor:
> bLength 12
> bDescriptorType 42
> nNbrPorts 4
> wHubCharacteristic 0x000d
> Per-port power switching
> Compound device
> Per-port overcurrent protection
> bPwrOn2PwrGood 100 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> bHubDecLat 0.4 micro seconds
> wHubDelay 4004 nano seconds
> DeviceRemovable 0x00
> Hub Port Status:
> Port 1: 0000.02a0 5Gbps power Rx.Detect
> Port 2: 0000.02a0 5Gbps power Rx.Detect
> Port 3: 0000.0203 5Gbps power U0 enable connect
> Port 4: 0000.02a0 5Gbps power Rx.Detect
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 42
> bNumDeviceCaps 3
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 4 micro seconds
> bU2DevExitLat 231 micro seconds
> Container ID Device Capability:
> bLength 20
> bDescriptorType 16
> bDevCapabilityType 4
> bReserved 0
> ContainerID {2d207069-441e-de4c-8f73-78ec5964eca7}
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 006: ID 174c:5106 ASMedia Technology Inc. Transcend StoreJet 25M3
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 9
> idVendor 0x174c ASMedia Technology Inc.
> idProduct 0x5106 Transcend StoreJet 25M3
> bcdDevice 0.01
> iManufacturer 2 ASMedia
> iProduct 3 AS2105
> iSerial 1 Z1F09686
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 44
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xc0
> Self Powered
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8 Mass Storage
> bInterfaceSubClass 6 SCSI
> bInterfaceProtocol 80 Bulk-Only
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 15
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 15
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 22
> bNumDeviceCaps 2
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 10 micro seconds
> bU2DevExitLat 2047 micro seconds
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 004: ID 2109:0812
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 3
> bMaxPacketSize0 9
> idVendor 0x2109
> idProduct 0x0812
> bcdDevice b.e1
> iManufacturer 1 VIA Labs, Inc.
> iProduct 2 USB3.0 Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 31
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 19
> Transfer Type Interrupt
> Synch Type None
> Usage Type Feedback
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 8
> bMaxBurst 0
> Hub Descriptor:
> bLength 12
> bDescriptorType 42
> nNbrPorts 4
> wHubCharacteristic 0x000d
> Per-port power switching
> Compound device
> Per-port overcurrent protection
> bPwrOn2PwrGood 100 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> bHubDecLat 0.4 micro seconds
> wHubDelay 4004 nano seconds
> DeviceRemovable 0x00
> Hub Port Status:
> Port 1: 0000.0203 5Gbps power U0 enable connect
> Port 2: 0000.02a0 5Gbps power Rx.Detect
> Port 3: 0000.02a0 5Gbps power Rx.Detect
> Port 4: 0000.02a0 5Gbps power Rx.Detect
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 42
> bNumDeviceCaps 3
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 4 micro seconds
> bU2DevExitLat 231 micro seconds
> Container ID Device Capability:
> bLength 20
> bDescriptorType 16
> bDevCapabilityType 4
> bReserved 0
> ContainerID {2d207069-441e-de4c-8f73-78ec5964eca7}
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 003: ID 2109:0812
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 3
> bMaxPacketSize0 9
> idVendor 0x2109
> idProduct 0x0812
> bcdDevice b.e1
> iManufacturer 1 VIA Labs, Inc.
> iProduct 2 USB3.0 Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 31
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 19
> Transfer Type Interrupt
> Synch Type None
> Usage Type Feedback
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 8
> bMaxBurst 0
> Hub Descriptor:
> bLength 12
> bDescriptorType 42
> nNbrPorts 4
> wHubCharacteristic 0x000d
> Per-port power switching
> Compound device
> Per-port overcurrent protection
> bPwrOn2PwrGood 100 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> bHubDecLat 0.4 micro seconds
> wHubDelay 4004 nano seconds
> DeviceRemovable 0x00
> Hub Port Status:
> Port 1: 0000.02a0 5Gbps power Rx.Detect
> Port 2: 0000.02a0 5Gbps power Rx.Detect
> Port 3: 0000.02a0 5Gbps power Rx.Detect
> Port 4: 0000.02a0 5Gbps power Rx.Detect
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 42
> bNumDeviceCaps 3
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 4 micro seconds
> bU2DevExitLat 231 micro seconds
> Container ID Device Capability:
> bLength 20
> bDescriptorType 16
> bDevCapabilityType 4
> bReserved 0
> ContainerID {2d207069-441e-de4c-8f73-78ec5964eca7}
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 002: ID 2109:0812
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 3
> bMaxPacketSize0 9
> idVendor 0x2109
> idProduct 0x0812
> bcdDevice b.e1
> iManufacturer 1 VIA Labs, Inc.
> iProduct 2 USB3.0 Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 31
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 19
> Transfer Type Interrupt
> Synch Type None
> Usage Type Feedback
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 8
> bMaxBurst 0
> Hub Descriptor:
> bLength 12
> bDescriptorType 42
> nNbrPorts 4
> wHubCharacteristic 0x000d
> Per-port power switching
> Compound device
> Per-port overcurrent protection
> bPwrOn2PwrGood 100 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> bHubDecLat 0.4 micro seconds
> wHubDelay 4004 nano seconds
> DeviceRemovable 0x00
> Hub Port Status:
> Port 1: 0000.0263 5Gbps power suspend enable connect
> Port 2: 0000.02a0 5Gbps power Rx.Detect
> Port 3: 0000.0203 5Gbps power U0 enable connect
> Port 4: 0000.0203 5Gbps power U0 enable connect
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 42
> bNumDeviceCaps 3
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 4 micro seconds
> bU2DevExitLat 231 micro seconds
> Container ID Device Capability:
> bLength 20
> bDescriptorType 16
> bDevCapabilityType 4
> bReserved 0
> ContainerID {2d207069-441e-de4c-8f73-78ec5964eca7}
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 3
> bMaxPacketSize0 9
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0003 3.0 root hub
> bcdDevice 4.01
> iManufacturer 3 Linux 4.1.2-default-pciehp xhci-hcd
> iProduct 2 xHCI Host Controller
> iSerial 1 0000:0b:00.0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 31
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> bMaxBurst 0
> Hub Descriptor:
> bLength 12
> bDescriptorType 42
> nNbrPorts 2
> wHubCharacteristic 0x0009
> Per-port power switching
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> bHubDecLat 0.0 micro seconds
> wHubDelay 0 nano seconds
> DeviceRemovable 0x00
> Hub Port Status:
> Port 1: 0000.0203 5Gbps power U0 enable connect
> Port 2: 0000.02a0 5Gbps power Rx.Detect
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 15
> bNumDeviceCaps 1
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x02
> Latency Tolerance Messages (LTM) Supported
> wSpeedsSupported 0x0008
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 3
> Lowest fully-functional device speed is SuperSpeed (5Gbps)
> bU1DevExitLat 0 micro seconds
> bU2DevExitLat 0 micro seconds
> Device Status: 0x0001
> Self Powered
>
> Bus 001 Device 007: ID 2109:2812
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x2109
> idProduct 0x2812
> bcdDevice b.e0
> iManufacturer 1 VIA Labs, Inc.
> iProduct 2 USB2.0 Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0001 1x 1 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 4
> wHubCharacteristic 0x00e9
> Per-port power switching
> Per-port overcurrent protection
> TT think time 32 FS bits
> Port indicators
> bPwrOn2PwrGood 50 * 2 milli seconds
> bHubContrCurrent 100 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 42
> bNumDeviceCaps 3
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 4 micro seconds
> bU2DevExitLat 231 micro seconds
> Container ID Device Capability:
> bLength 20
> bDescriptorType 16
> bDevCapabilityType 4
> bReserved 0
> ContainerID {2d207069-441e-de4c-8f73-78ec5964eca7}
> Device Status: 0x0001
> Self Powered
>
> Bus 001 Device 004: ID 2109:2812
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x2109
> idProduct 0x2812
> bcdDevice b.e0
> iManufacturer 1 VIA Labs, Inc.
> iProduct 2 USB2.0 Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0001 1x 1 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 4
> wHubCharacteristic 0x00e9
> Per-port power switching
> Per-port overcurrent protection
> TT think time 32 FS bits
> Port indicators
> bPwrOn2PwrGood 50 * 2 milli seconds
> bHubContrCurrent 100 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 42
> bNumDeviceCaps 3
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 4 micro seconds
> bU2DevExitLat 231 micro seconds
> Container ID Device Capability:
> bLength 20
> bDescriptorType 16
> bDevCapabilityType 4
> bReserved 0
> ContainerID {2d207069-441e-de4c-8f73-78ec5964eca7}
> Device Status: 0x0001
> Self Powered
>
> Bus 001 Device 003: ID 2109:2812
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x2109
> idProduct 0x2812
> bcdDevice b.e0
> iManufacturer 1 VIA Labs, Inc.
> iProduct 2 USB2.0 Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0001 1x 1 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 4
> wHubCharacteristic 0x00e9
> Per-port power switching
> Per-port overcurrent protection
> TT think time 32 FS bits
> Port indicators
> bPwrOn2PwrGood 50 * 2 milli seconds
> bHubContrCurrent 100 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 42
> bNumDeviceCaps 3
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 4 micro seconds
> bU2DevExitLat 231 micro seconds
> Container ID Device Capability:
> bLength 20
> bDescriptorType 16
> bDevCapabilityType 4
> bReserved 0
> ContainerID {2d207069-441e-de4c-8f73-78ec5964eca7}
> Device Status: 0x0001
> Self Powered
>
> Bus 001 Device 002: ID 2109:2812
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x2109
> idProduct 0x2812
> bcdDevice b.e0
> iManufacturer 1 VIA Labs, Inc.
> iProduct 2 USB2.0 Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0001 1x 1 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 4
> wHubCharacteristic 0x00e9
> Per-port power switching
> Per-port overcurrent protection
> TT think time 32 FS bits
> Port indicators
> bPwrOn2PwrGood 50 * 2 milli seconds
> bHubContrCurrent 100 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0507 highspeed power suspend enable connect
> Port 2: 0000.0100 power
> Port 3: 0000.0507 highspeed power suspend enable connect
> Port 4: 0000.0507 highspeed power suspend enable connect
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 42
> bNumDeviceCaps 3
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> HIRD Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 4 micro seconds
> bU2DevExitLat 231 micro seconds
> Container ID Device Capability:
> bLength 20
> bDescriptorType 16
> bDevCapabilityType 4
> bReserved 0
> ContainerID {2d207069-441e-de4c-8f73-78ec5964eca7}
> Device Status: 0x0001
> Self Powered
>
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 4.01
> iManufacturer 3 Linux 4.1.2-default-pciehp xhci-hcd
> iProduct 2 xHCI Host Controller
> iSerial 1 0000:0b:00.0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x0009
> Per-port power switching
> Per-port overcurrent protection
> TT think time 8 FS bits
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0507 highspeed power suspend enable connect
> Port 2: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x8087 Intel Corp.
> idProduct 0x0024 Integrated Rate Matching Hub
> bcdDevice 0.00
> iManufacturer 0
> iProduct 0
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0001 1x 1 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 6
> wHubCharacteristic 0x0009
> Per-port power switching
> Per-port overcurrent protection
> TT think time 8 FS bits
> bPwrOn2PwrGood 50 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Port 5: 0000.0100 power
> Port 6: 0000.0100 power
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0001
> Self Powered
>
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 4.01
> iManufacturer 3 Linux 4.1.2-default-pciehp ehci_hcd
> iProduct 2 EHCI Host Controller
> iSerial 1 0000:00:1a.0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x02
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0507 highspeed power suspend enable connect
> Port 2: 0000.0100 power
> Device Status: 0x0001
> Self Powered
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
