On Thu, Jul 09, 2015 at 09:22:09PM +0800, Li Jun wrote:
> On Thu, Jul 09, 2015 at 11:57:39AM +0300, Roger Quadros wrote:
> > Hi,
> >
> > On 09/07/15 10:18, Li Jun wrote:
> > > Init and update otg capabilities by DT, set gadget's otg capabilities
> > > accordingly.
> > >
> > > Signed-off-by: Li Jun <jun.li@xxxxxxxxxxxxx>
> > > ---
> > > drivers/usb/chipidea/core.c | 15 +++++++++++++++
> > > drivers/usb/chipidea/udc.c | 7 ++++++-
> > > include/linux/usb/chipidea.h | 1 +
> > > 3 files changed, 22 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> > > index 74fea4f..1e6d5f0 100644
> > > --- a/drivers/usb/chipidea/core.c
> > > +++ b/drivers/usb/chipidea/core.c
> > > @@ -560,6 +560,8 @@ static irqreturn_t ci_irq(int irq, void *data)
> > > static int ci_get_platdata(struct device *dev,
> > > struct ci_hdrc_platform_data *platdata)
> > > {
> > > + int ret;
> > > +
> > > if (!platdata->phy_mode)
> > > platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
> > >
> > > @@ -588,6 +590,19 @@ static int ci_get_platdata(struct device *dev,
> > > of_usb_host_tpl_support(dev->of_node);
> > > }
> > >
> > > + if (platdata->dr_mode == USB_DR_MODE_OTG) {
> > > + /* We can support HNP and SRP of OTG 2.0 */
> > > + platdata->ci_otg_caps.otg_rev = 0x0200;
> > > + platdata->ci_otg_caps.hnp_support = true;
> > > + platdata->ci_otg_caps.srp_support = true;
> > > +
> > > + /* Update otg capabilities by DT properties */
> > > + ret = of_usb_update_otg_caps(dev->of_node,
> > > + &platdata->ci_otg_caps);
> > > + if (ret)
> > > + return ret;
> > > + }
> > > +
> > > if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
> > > platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
> > >
> > > diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> > > index 764f668..b7cca3e 100644
> > > --- a/drivers/usb/chipidea/udc.c
> > > +++ b/drivers/usb/chipidea/udc.c
> > > @@ -1827,6 +1827,7 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
> > > static int udc_start(struct ci_hdrc *ci)
> > > {
> > > struct device *dev = ci->dev;
> > > + struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
> > > int retval = 0;
> > >
> > > spin_lock_init(&ci->lock);
> > > @@ -1834,8 +1835,12 @@ static int udc_start(struct ci_hdrc *ci)
> > > ci->gadget.ops = &usb_gadget_ops;
> > > ci->gadget.speed = USB_SPEED_UNKNOWN;
> > > ci->gadget.max_speed = USB_SPEED_HIGH;
> > > - ci->gadget.is_otg = ci->is_otg ? 1 : 0;
> > > ci->gadget.name = ci->platdata->name;
> > > + ci->gadget.otg_caps = otg_caps;
> > > +
> > > + if (otg_caps->hnp_support || otg_caps->srp_support ||
> > > + otg_caps->adp_support)
> > > + ci->gadget.is_otg = 1;
> >
> > It seems there are non OTG capable dual-role only ci controllers as well
> > looking at ci_get_otg_capable() code.
> >
> > If so then this should be
> > if (ci->is_otg && (otg_caps->hnp_support || otg_caps->srp_support ||
> > otg_caps->adp_support))
> > ci->gadget.is_otg = 1
> >
> > cheers,
> > -roger
> >
> Seems it was in my previous version but dropped it by mistake later,
> I will add it.
>
After you adding roger's comments, add my ack.
Acked-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> Li Jun
> > >
> > > INIT_LIST_HEAD(&ci->gadget.ep_list);
> > >
> > > diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> > > index ab94f78..e10cefc 100644
> > > --- a/include/linux/usb/chipidea.h
> > > +++ b/include/linux/usb/chipidea.h
> > > @@ -34,6 +34,7 @@ struct ci_hdrc_platform_data {
> > > #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
> > > void (*notify_event) (struct ci_hdrc *ci, unsigned event);
> > > struct regulator *reg_vbus;
> > > + struct usb_otg_caps ci_otg_caps;
> > > bool tpl_support;
> > > };
> > >
> > >
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
