Hi,
On 09/07/15 10:18, Li Jun wrote:
> Init and update otg capabilities by DT, set gadget's otg capabilities
> accordingly.
>
> Signed-off-by: Li Jun <jun.li@xxxxxxxxxxxxx>
> ---
> drivers/usb/chipidea/core.c | 15 +++++++++++++++
> drivers/usb/chipidea/udc.c | 7 ++++++-
> include/linux/usb/chipidea.h | 1 +
> 3 files changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 74fea4f..1e6d5f0 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -560,6 +560,8 @@ static irqreturn_t ci_irq(int irq, void *data)
> static int ci_get_platdata(struct device *dev,
> struct ci_hdrc_platform_data *platdata)
> {
> + int ret;
> +
> if (!platdata->phy_mode)
> platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
>
> @@ -588,6 +590,19 @@ static int ci_get_platdata(struct device *dev,
> of_usb_host_tpl_support(dev->of_node);
> }
>
> + if (platdata->dr_mode == USB_DR_MODE_OTG) {
> + /* We can support HNP and SRP of OTG 2.0 */
> + platdata->ci_otg_caps.otg_rev = 0x0200;
> + platdata->ci_otg_caps.hnp_support = true;
> + platdata->ci_otg_caps.srp_support = true;
> +
> + /* Update otg capabilities by DT properties */
> + ret = of_usb_update_otg_caps(dev->of_node,
> + &platdata->ci_otg_caps);
> + if (ret)
> + return ret;
> + }
> +
> if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
> platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
>
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> index 764f668..b7cca3e 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -1827,6 +1827,7 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
> static int udc_start(struct ci_hdrc *ci)
> {
> struct device *dev = ci->dev;
> + struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
> int retval = 0;
>
> spin_lock_init(&ci->lock);
> @@ -1834,8 +1835,12 @@ static int udc_start(struct ci_hdrc *ci)
> ci->gadget.ops = &usb_gadget_ops;
> ci->gadget.speed = USB_SPEED_UNKNOWN;
> ci->gadget.max_speed = USB_SPEED_HIGH;
> - ci->gadget.is_otg = ci->is_otg ? 1 : 0;
> ci->gadget.name = ci->platdata->name;
> + ci->gadget.otg_caps = otg_caps;
> +
> + if (otg_caps->hnp_support || otg_caps->srp_support ||
> + otg_caps->adp_support)
> + ci->gadget.is_otg = 1;
It seems there are non OTG capable dual-role only ci controllers as well
looking at ci_get_otg_capable() code.
If so then this should be
if (ci->is_otg && (otg_caps->hnp_support || otg_caps->srp_support ||
otg_caps->adp_support))
ci->gadget.is_otg = 1
cheers,
-roger
>
> INIT_LIST_HEAD(&ci->gadget.ep_list);
>
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index ab94f78..e10cefc 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -34,6 +34,7 @@ struct ci_hdrc_platform_data {
> #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
> void (*notify_event) (struct ci_hdrc *ci, unsigned event);
> struct regulator *reg_vbus;
> + struct usb_otg_caps ci_otg_caps;
> bool tpl_support;
> };
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
