Ricardo,
I’m trying to get the 3380 to work in UAS mode on the 4.0.1 and/or 4.1.0-rc8 kernels.
I’m using the following script (derived from Sebastian’s post):
modprobe tcm_usb_gadget
mount -t configfs none /sys/kernel/config
CONFIGFS=/sys/kernel/config/
TARGET=$CONFIGFS/target/core/
FABRIC=$CONFIGFS/target/usb_gadget/
mkdir -p $TARGET/rd_mcp_0/ramdisk
echo -n rd_pages=32768 > $TARGET/rd_mcp_0/ramdisk/control
echo -n 1 > $TARGET/rd_mcp_0/ramdisk/enable
mkdir -p $FABRIC/naa.6001405c3214b06a/tpgt_1
mkdir $FABRIC/naa.6001405c3214b06a/tpgt_1/lun/lun_0
echo -n naa.6001405c3214b06b > $FABRIC/naa.6001405c3214b06a/tpgt_1/nexus
ln -sv $TARGET/rd_mcp_0/ramdisk $FABRIC/naa.6001405c3214b06a/tpgt_1/lun/lun_0/virtual_scsi_port
echo 1 > $FABRIC/naa.6001405c3214b06a/tpgt_1/enable
On either of the kernels, once I setup UAS I get an error from tcm_usb_gadget: "Can't claim all required eps”.
This seems to be due to the fact that max_streams = 0 on every EP for the 3380.
If I patch around that:
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 0567cca..94ade78 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -117,8 +117,10 @@ ep_matches (
if (usb_endpoint_xfer_bulk(desc)) {
if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
num_req_streams = ep_comp->bmAttributes & 0x1f;
- if (num_req_streams > ep->max_streams)
+ printk("%s: requested streams %d < max streams %d",ep->name, num_req_streams, ep->max_streams);
+/* if (num_req_streams > ep->max_streams)
return 0;
+*/
}
}
then I can at least get UAS to load, but as soon as I connect a linux box to the 3380 I then get errors:
[ 50.954080] ep1in: requested streams 4 < max streams 0
[ 50.954089] ep2out: requested streams 4 < max streams 0
[ 50.954097] ep3in: requested streams 4 < max streams 0
[ 50.954105] ep4out: requested streams 0 < max streams 0
[ 50.954116] g_target gadget: g_target ready
[ 50.954129] net2280 0000:05:00.0: Operate Defect 7374 workaround soft this time
[ 50.954130] net2280 0000:05:00.0: It will operate on cold-reboot and SS connect
[ 51.198283] net2280 0000:05:00.0: INFO: Defect 7374 workaround waited about
[ 51.198283] 0uSec for Control Read Data Phase ACK
[ 51.199366] g_target gadget: super-speed config #1: Linux Target
[ 51.199394] Using the BOT protocol
[ 51.199903] Wrong signature on CBW
[ 51.199913] bot_cmd_complete(313): -22
[ 51.199955] Using the UAS protocol
[ 72.789041] Unsupported type 0
[ 72.789063] g_target gadget: super-speed config #1: Linux Target
[ 72.789114] Using the BOT protocol
[ 72.789406] Wrong signature on CBW
[ 72.789415] bot_cmd_complete(313): -22
[ 72.789456] Using the UAS protocol
[ 72.921156] Unsupported type 0
[ 72.921174] g_target gadget: super-speed config #1: Linux Target
[ 72.921222] Using the BOT protocol
[ 72.921514] Wrong signature on CBW
[ 72.921523] bot_cmd_complete(313): -22
[ 72.921563] Using the UAS protocol
On the connected Linux box (running 4.1.0-rc8 as well), I get:
[ 4563.476084] usb 2-3: new SuperSpeed USB device number 5 using xhci_hcd
[ 4563.492900] usb 2-3: New USB device found, idVendor=0525, idProduct=a4a5
[ 4563.492903] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4563.492904] usb 2-3: Product: Target Product
[ 4563.492906] usb 2-3: Manufacturer: Target Manufactor
[ 4563.492907] usb 2-3: SerialNumber: 000000000001
[ 4563.494193] scsi host9: uas
[ 4563.494298] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 4563.494324] xhci_hcd 0000:00:14.0: @00000000d43e2500 d3921000 00000000 0a000000 04078000
[ 4563.494346] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 4563.494371] xhci_hcd 0000:00:14.0: @00000000d43e2510 d3921400 00000000 0a000000 04038000
[ 4584.936226] scsi 9:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 4584.936230] scsi 9:0:0:0: tag#0 CDB: Inquiry 12 00 00 00 24 00
[ 4584.936286] scsi host9: uas_eh_bus_reset_handler start
[ 4585.048559] usb 2-3: reset SuperSpeed USB device number 5 using xhci_hcd
[ 4585.065687] scsi host9: uas_eh_bus_reset_handler success
[ 4585.065707] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 4585.065736] xhci_hcd 0000:00:14.0: @00000000d43e2650 d3921800 00000000 0a000000 04078000
[ 4585.068219] scsi 9:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
[ 4585.068223] scsi 9:0:0:0: tag#0 CDB: Test Unit Ready 00 00 00 00 00 00
[ 4585.068224] scsi host9: uas_eh_bus_reset_handler start
[ 4585.180561] usb 2-3: reset SuperSpeed USB device number 5 using xhci_hcd
[ 4585.197711] scsi host9: uas_eh_bus_reset_handler success
[ 4585.197717] scsi 9:0:0:0: Device offlined - not ready after error recovery
I presume that the net2280 driver should set max_stream for each EP when in enhanced mode (3380) but I haven’t been able to figure out yet where to do that.
I am starting to get myself familiarised with the code so I can help out and provide some patches.
Sebastian: any ideas what else might be wrong that could cause the CBW signature to be wrong?
Regards,
Paul.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
