Hi,
On Wednesday 24 June 2015 04:04 PM, Roger Quadros wrote:
> On Tue, 23 Jun 2015 17:28:48 +0530
> Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
>
>> Deprecate using phy-omap-control driver to set PCS value of the PHY
>> and start using *syscon* framework to do the same.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>> Documentation/devicetree/bindings/phy/ti-phy.txt | 2 ++
>> drivers/phy/phy-ti-pipe3.c | 32 +++++++++++++++++++++-
>> 2 files changed, 33 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
>> index d3ad3bf..52c7a92 100644
>> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
>> @@ -83,6 +83,8 @@ Optional properties:
>> - syscon-pllreset: Handle to system control region that contains the
>> CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
>> register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
>> + - syscon-pcs : phandle/offset pair. Phandle to the system control module and the
>> + register offset to write the PCS delay value.
>
> What is PCS?
IIRC physical coding subsystem.
> Is this valid only for PCIe? If yes we could mention it here.
This is introduced specifically for PCIe. But there are other PCS registers
with a different register map altogether for USB. I'm not sure if we will ever
have to do those settings.
Thanks
Kishon
>
>>
>> Deprecated properties:
>> - ctrl-module : phandle of the control module used by PHY driver to power on
>> diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
>> index 78bac00..e2f9ad7 100644
>> --- a/drivers/phy/phy-ti-pipe3.c
>> +++ b/drivers/phy/phy-ti-pipe3.c
>> @@ -65,6 +65,9 @@
>> #define PIPE3_PHY_TX_RX_POWERON 0x3
>> #define PIPE3_PHY_TX_RX_POWEROFF 0x0
>>
>> +#define PCIE_PCS_MASK 0xFF0000
>> +#define PCIE_PCS_DELAY_COUNT_SHIFT 0x10
>> +
>> /*
>> * This is an Empirical value that works, need to confirm the actual
>> * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
>> @@ -96,9 +99,11 @@ struct ti_pipe3 {
>> struct clk *div_clk;
>> struct pipe3_dpll_map *dpll_map;
>> struct regmap *phy_power_syscon; /* ctrl. reg. acces */
>> + struct regmap *pcs_syscon; /* ctrl. reg. acces */
>> struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */
>> unsigned int dpll_reset_reg; /* reg. index within syscon */
>> unsigned int power_reg; /* power reg. index within syscon */
>> + unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */
>> bool sata_refclk_enabled;
>> };
>>
>> @@ -271,7 +276,16 @@ static int ti_pipe3_init(struct phy *x)
>> * 18-1804.
>> */
>> if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
>> - omap_control_pcie_pcs(phy->control_dev, 0x96);
>> + if (phy->pcs_syscon) {
>> + val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
>> + ret = regmap_update_bits(phy->pcs_syscon,
>> + phy->pcie_pcs_reg,
>> + PCIE_PCS_MASK, val);
>> + if (ret < 0)
>> + return ret;
>> + } else {
>> + omap_control_pcie_pcs(phy->control_dev, 0x96);
>> + }
>> return 0;
>> }
>>
>> @@ -455,6 +469,22 @@ static int ti_pipe3_probe(struct platform_device *pdev)
>> dev_err(&pdev->dev, "unable to get div-clk\n");
>> return PTR_ERR(phy->div_clk);
>> }
>> +
>> + phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
>> + "syscon-pcs");
>> + if (IS_ERR(phy->pcs_syscon)) {
>> + dev_dbg(&pdev->dev,
>> + "can't get syscon-pcs, using omap control\n");
>> + phy->pcs_syscon = NULL;
>> + } else {
>> + if (of_property_read_u32_index(node,
>> + "syscon-pcs", 1,
>> + &phy->pcie_pcs_reg)) {
>> + dev_err(&pdev->dev,
>> + "couldn't get pcie pcs reg. offset\n");
>> + return -EINVAL;
>> + }
>> + }
>> } else {
>> phy->div_clk = ERR_PTR(-ENODEV);
>> }
>> --
>> 1.7.9.5
>>
>
> Other than that,
>
> Acked-by: Roger Quadros <rogerq@xxxxxx>
>
> cheers,
> -roger
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
