[PATCH 00/17] Deprecate phy-omap-control and use SYSCON

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



phy-omap-control driver was added when there was no proper
infrastructure for doing control module initializations.
Now with SYSCON framework being added to the kernel, phy-omap-control
shouldn't be needed.

This series is about adapting phy-omap-usb2, phy-ti-pipe3 and omap2430
to use SYSCON framework instead of phy-omap-control.
However we can't remove the phy-omap-control driver altogether since
that will break older dtbs.

Performed USB enumeration testing in DRA72-EVM, AM43XX-EVM, OMAP5-uEVM
and OMAP4 PANDA.

Performed SATA enumeration testing in DRA72-EVM and OMAP5-uEVM

Performed PCIe enumeration testing in DRA72-EVM.

This patch series is developed on top of Linux 4.1-rc8 +
http://lkml.iu.edu/hypermail/linux/kernel/1505.1/03099.html

Kishon Vijay Abraham I (17):
  phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during
    probe
  phy: ti-pipe3: use *syscon* framework to power on/off the PHY
  phy: ti-pipe3: use *syscon* framework to set PCS value of the PHY
  phy: omap-usb2: use omap_usb_power_off to power off the PHY during
    probe
  phy: omap-usb2: Add a new compatible string for USB2 PHY2
  phy: omap-usb2: use *syscon* framework to power on/off the PHY
  usb: musb: omap2430: use *syscon* framework to write to mailbox
    register
  ARM: dts: dra7: Add dt node for the sycon pcie
  ARM: dts: dra7: Use "syscon-phy-power" instead of "ctrl-module" in
    SATA PHY node
  ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY
    node
  ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2
    PHY2
  ARM: dts: dra7: Use "syscon-phy-power" instead of "ctrl-module" in
    USB PHY node
  ARM: dts: am4372: Use "syscon-phy-power" instead of "ctrl-module" in
    USB PHY node
  ARM: dts: OMAP5: Use "syscon-phy-power" instead of "ctrl-module" in
    USB PHY node
  ARM: dts: OMAP5: Use "syscon-phy-power" instead of "ctrl-module" in
    SATA PHY node
  ARM: dts: omap4: Use "syscon-phy-power" instead of "ctrl-module" in
    USB PHY node
  ARM: dts: omap4: Use "syscon-otghs" instead of "ctrl-module" in USB
    node

 Documentation/devicetree/bindings/phy/ti-phy.txt   |   20 +++-
 Documentation/devicetree/bindings/usb/omap-usb.txt |    7 +-
 arch/arm/boot/dts/am4372.dtsi                      |   16 +--
 arch/arm/boot/dts/dra7.dtsi                        |   69 +++--------
 arch/arm/boot/dts/omap4.dtsi                       |   16 +--
 arch/arm/boot/dts/omap5.dtsi                       |   26 +---
 drivers/phy/phy-omap-usb2.c                        |  112 +++++++++++++++---
 drivers/phy/phy-ti-pipe3.c                         |  125 +++++++++++++++++---
 drivers/usb/musb/omap2430.c                        |  118 ++++++++++++++----
 include/linux/phy/omap_usb.h                       |   18 +++
 10 files changed, 365 insertions(+), 162 deletions(-)

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux