From: "Peter E. Berger" <pberger@xxxxxxxxxxx> The firmware has a "build_number" field, though it is apparently unused (according to observations of the three firmware images I have seen and confirmed by Digi Tech Support). This comment describes its structure, in case it is populated in a future release. Signed-off-by: Peter E. Berger <pberger@xxxxxxxxxxx> --- drivers/usb/serial/io_ti.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index ad93280..98bfd34 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2386,9 +2386,15 @@ static int edge_startup(struct usb_serial *serial) return err; } + /* + * If the on-board firmware version is newer, download_fw() + * will retain it and revise edge_serial->fw_version. The + * firmware also includes an le16 "build_number" at data+2, but + * it has been set to 0 in all three of the images I have seen, + * and Digi Tech Support suggests that it is safe to ignore it. + */ fw_major_version = fw->data[0]; fw_minor_version = fw->data[1]; - /* If on-board fw is newer, download_fw() will revise "fw_version" */ edge_serial->fw_version = (fw_major_version << 8) + fw_minor_version; status = download_fw(edge_serial, fw); -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
