On Sat, 13 Jun 2015 13:09:56 +0200 Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> wrote: > Hi Jiri, > > On Fri, 12 Jun 2015 11:30:20 +0200 > Jiří Prchal <jiri.prchal@xxxxxxxxxxx> wrote: > > > > > > > On 11.6.2015 15:53, Alan Stern wrote: > > > On Thu, 11 Jun 2015, Jiří Prchal wrote: > > > > > >> Hi all, > > >> I discovered some bug when I change kernel from 3.18.13 to 3.18.14. I have board with usb hub CY7C65632 on it. > > >> In .13 it works fine but in .14 it repeats this message: > > >> [ 19.170000] usb 2-3: new full-speed USB device number 56 using at91_ohci > > >> and devices connected to usb through hub doesn't appear at all. > > > > > >> Any idea? > > > > > > Try using git bisect to find the commit which caused this problem to > > > start. > > > > This is result: > > Bisecting: 0 revisions left to test after this (roughly 0 steps) > > [ae74ea64ccdb8b99ee2618b58020263d5b1d9b22] clk: at91: usb: propagate rate modification to the parent clk > > > Actually when bisecting you found a bug that has been fixed before > 3.18.14 was released (see this commit [1]). > This being said, the prototype mismatch fix does not seem to fix all > the mismatches (seems the ->determine_rate() has been changed in 3.19 > too, and the prototype mismatch patch was a backport of a 3.19 fix). > > Anyway, you'll find below a patch supposed to fix the remaining bug. I forgot to disable the line wrapper in my email client, here is the same patch without the wrapped lines: -- >8 -- >From 7392429d074f43ef61d41e33db63f0f5d804bdd4 Mon Sep 17 00:00:00 2001 Subject: [PATCH] clk: at91: fix determine_rate prototype (again) Commit ae74ea64ccdb8b99ee2618b58020263d5b1d9b22 was a backport of a bug fix applied in 4.0, but in the meantime the ->determine_rate() prototype has changed, thus introduction a prototype mismatch bug in pre-4.0 kernels. This prototype mismatch was supposed to be fixed by commit 76723e7ed589998384a080e29204df4659c67cf2, which fix the bug on 3.19 kernels, but the ->determine_rate() has also changed between 3.18 and 3.19. Hopefully this patch will definitely fix the prototype mismatch for 3.18. Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> --- drivers/clk/at91/clk-usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c index 0283a57..d0d335d 100644 --- a/drivers/clk/at91/clk-usb.c +++ b/drivers/clk/at91/clk-usb.c @@ -59,7 +59,7 @@ static unsigned long at91sam9x5_clk_usb_recalc_rate(struct clk_hw *hw, static long at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate, - struct clk_hw **best_parent_hw) + struct clk **best_parent_clk) { struct clk *parent = NULL; long best_rate = -EINVAL; @@ -91,7 +91,7 @@ static long at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw, best_rate = tmp_rate; best_diff = tmp_diff; *best_parent_rate = tmp_parent_rate; - *best_parent_hw = __clk_get_hw(parent); + *best_parent_clk = parent; } if (!best_diff || tmp_rate < rate) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html