Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.
Furthermore there is devm_gpiod_get_optional which is designed to get
optional gpios.
Simplify driver accordingly. Furthermore this is one caller less that
stops us making the flags argument to gpiod_get*() mandatory.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
Hello,
[for the initial submission I forgot linux-usb on Cc, Felipe Balbi
requested a resend]
note I plan to make the flags parameter mandatory for 4.3. So unless
this change gets into 4.2, would it be ok to let it go in via the gpio
tree?
Best regards
Uwe
drivers/phy/phy-tusb1210.c | 30 ++++++++++++------------------
1 file changed, 12 insertions(+), 18 deletions(-)
diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/phy-tusb1210.c
index 07efdd318bdc..93dd45f2f26e 100644
--- a/drivers/phy/phy-tusb1210.c
+++ b/drivers/phy/phy-tusb1210.c
@@ -61,32 +61,26 @@ static struct phy_ops phy_ops = {
static int tusb1210_probe(struct ulpi *ulpi)
{
- struct gpio_desc *gpio;
struct tusb1210 *tusb;
u8 val, reg;
- int ret;
tusb = devm_kzalloc(&ulpi->dev, sizeof(*tusb), GFP_KERNEL);
if (!tusb)
return -ENOMEM;
- gpio = devm_gpiod_get(&ulpi->dev, "reset");
- if (!IS_ERR(gpio)) {
- ret = gpiod_direction_output(gpio, 0);
- if (ret)
- return ret;
- gpiod_set_value_cansleep(gpio, 1);
- tusb->gpio_reset = gpio;
- }
+ tusb->gpio_reset = devm_gpiod_get_optional(&ulpi->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(tusb->gpio_reset))
+ return PTR_ERR(tusb->gpio_reset);
- gpio = devm_gpiod_get(&ulpi->dev, "cs");
- if (!IS_ERR(gpio)) {
- ret = gpiod_direction_output(gpio, 0);
- if (ret)
- return ret;
- gpiod_set_value_cansleep(gpio, 1);
- tusb->gpio_cs = gpio;
- }
+ gpiod_set_value_cansleep(tusb->gpio_reset, 1);
+
+ tusb->gpio_cs = devm_gpiod_get_optional(&ulpi->dev, "cs",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(tusb->gpio_cs))
+ return PTR_ERR(tusb->gpio_cs);
+
+ gpiod_set_value_cansleep(tusb->gpio_cs, 1);
/*
* VENDOR_SPECIFIC2 register in TUSB1210 can be used for configuring eye
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
