> On Mon, Apr 20, 2015 at 10:00:49PM +0800, Li Jun wrote: > > On Thu, Mar 26, 2015 at 05:38:11PM +0800, Peter Chen wrote: > > > On Wed, Mar 25, 2015 at 07:25:24PM +0800, Li Jun wrote: > > > > On Wed, Mar 25, 2015 at 02:43:43PM +0800, Chen Peter-B29397 wrote: > > > > > > > > > > > On Wed, Mar 25, 2015 at 02:03:51PM +0800, Peter Chen wrote: > > > > > > > > > > > > > > Hi Jun, > > > > > > > > > > > > > > The above three patches are in Greg's next tree, after I > > > > > > > apply your chipidea fix [1] for pullup dp, it still some > > > > > > > other problems for HNP, am I missing something? > > > > > > > > > > > > > > The procedures to reproduce: > > > > > > > > > > > > > > - Connect USB cable and MicroAB cable between two boards > > > > > > > - Boot up two boards > > > > > > > - load g_mass_storage at B-device side, the enumeration will > > > > > > > success, and A will see a usb mass-storage device > > > > > > > - load g_mass_storage at A-device side > > > > > > > - Do HNP at B side, the HNP will succeed echo 1 > > > > > > > > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req > > > > > > > - Do HNP at A side > > > > > > > echo 1 > > > > > > > > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req > > > > > > > > > > > > > > The problem has occurred, the A can't be back to host again. > > > > > > > > > > > > > I use your peter-usb-dev branch and did not found the problem, > > > > > > so I need use Greg's tree to try again? > > > > > > > > > > > > > > > > No, I first found this problem with my dev tree, then, I rebase > > > > > the latest Greg next tree, this problem still exists. You can > > > > > try to use FSL imx6dl sdb as A device and imx6sx sdb as B device to > reproduce it. > > > > > > > > > > > > > It can work with my i.MX6DL + i.MX6Q SD, but with i.MX6DL + > > > > i.MX6SX SDB, I can reproduce the problem you reported, which > > > > triggers a bug in our otg_fsm driver, I will send out a patch to fix it. > > > > > > > > Li Jun > > > > > > > > > > Jun, > > > > > > With your two chipidea fixes [1][2], I can run otg test successfully. > > > > > > [1] > > > https://git.kernel.org/cgit/linux/kernel/git/peter.chen/usb.git/comm > > > it/?h=ci-for-usb-stable&id=885510e8778bf0f2d38e2fd0807d8f84ca12a8d9 > > > [2] > > > https://git.kernel.org/cgit/linux/kernel/git/peter.chen/usb.git/comm > > > it/?h=ci-for-usb-next&id=80c4b00dd0bee2ff5f430fae7e96d9599d36682f > > > > > > Hi Felipe, > > > > > > I am ok with this series, if you have no more comments, would you > > > help queue this series through your tree? > > > > > > > ping... > Hi Felipe, Since it is close to v4.2-rc1, will you queue it? Thanks. Peter -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
