On Thu, May 14, 2015 at 12:40 AM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> On Thu, 14 May 2015, Jon Hunter wrote:
>
>> Hi Lee,
>>
>> On 13/05/15 15:39, Lee Jones wrote:
>> > On Mon, 04 May 2015, Andrew Bresticker wrote:
>> >
>> >> Add a binding document for the XUSB host complex on NVIDIA Tegra124
>> >> and later SoCs. The XUSB host complex includes a mailbox for
>> >> communication with the XUSB micro-controller and an xHCI host-controller.
>> >>
>> >> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
>> >> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> >> Cc: Pawel Moll <pawel.moll@xxxxxxx>
>> >> Cc: Mark Rutland <mark.rutland@xxxxxxx>
>> >> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
>> >> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
>> >> Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
>> >> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
>> >> ---
>> >> Changes from v7:
>> >> - Move non-shared resources into child nodes.
>> >> New for v7.
>> >> ---
>> >> .../bindings/mfd/nvidia,tegra124-xusb.txt | 37 ++++++++++++++++++++++
>> >> 1 file changed, 37 insertions(+)
>> >> create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
>> >>
>> >> diff --git a/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
>> >> new file mode 100644
>> >> index 0000000..bc50110
>> >> --- /dev/null
>> >> +++ b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
>> >> @@ -0,0 +1,37 @@
>> >> +NVIDIA Tegra XUSB host copmlex
>> >> +==============================
>> >> +
>> >> +The XUSB host complex on Tegra124 and later SoCs contains an xHCI host
>> >> +controller and a mailbox for communication with the XUSB micro-controller.
>> >> +
>> >> +Required properties:
>> >> +--------------------
>> >> + - compatible: For Tegra124, must contain "nvidia,tegra124-xusb".
>> >> + Otherwise, must contain '"nvidia,<chip>-xusb", "nvidia,tegra124-xusb"'
>> >> + where <chip> is tegra132.
>> >> + - reg: Must contain the base and length of the XUSB FPCI registers.
>> >> + - ranges: Bus address mapping for the XUSB block. Can be empty since the
>> >> + mapping is 1:1.
>> >> + - #address-cells: Must be 2.
>> >> + - #size-cells: Must be 2.
>> >> +
>> >> +Example:
>> >> +--------
>> >> + usb@0,70098000 {
>> >> + compatible = "nvidia,tegra124-xusb";
>> >> + reg = <0x0 0x70098000 0x0 0x1000>;
>> >> + ranges;
>> >> +
>> >> + #address-cells = <2>;
>> >> + #size-cells = <2>;
>> >> +
>> >> + usb-host@0,70090000 {
>> >> + compatible = "nvidia,tegra124-xhci";
>> >> + ...
>> >> + };
>> >> +
>> >> + mailbox {
>> >> + compatible = "nvidia,tegra124-xusb-mbox";
>> >> + ...
>> >> + };
>> >
>> > This doesn't appear to be a proper MFD. I would have the USB and
>> > Mailbox devices probe seperately and use a phandle to point the USB
>> > device to its Mailbox.
>> >
>> > usb@xyz {
>> > mboxes = <&xusb-mailbox, [chan]>;
>> > };
>> >
>>
>> I am assuming that Andrew had laid it out like this to reflect the hw
>> structure. The mailbox and xhci controller are part of the xusb
>> sub-system and hence appear as child nodes. My understanding is that for
>> device-tree we want the device-tree structure to reflect the actual hw.
>> Is this not the case?
>
> Yes, the DT files should reflect h/w. I have requested to see what
> the memory map looks like, so I might provide a more appropriate
> solution to accepting a pretty pointless MFD.
FWIW, the address map for XUSB looks like this:
XUSB_HOST: 0x70090000 - 0x7009a000
xHCI registers: 0x70090000 - 0x70098000
FPCI configuration registers: 0x70098000 - 0x70099000
IPFS configuration registers: 0x70099000 - 0x7009a000
> Two solutions spring to mind. You can either call
> of_platform_populate() from the USB driver, as some already do:
>
> drivers/usb/dwc3/dwc3-exynos.c:
> ret = of_platform_populate(node, NULL, NULL, dev);
> drivers/usb/dwc3/dwc3-keystone.c:
> error = of_platform_populate(node, NULL, NULL, dev);
> drivers/usb/dwc3/dwc3-omap.c:
> ret = of_platform_populate(node, NULL, NULL, dev);
> drivers/usb/dwc3/dwc3-qcom.c:
> ret = of_platform_populate(node, NULL, NULL, qdwc->dev);
> drivers/usb/dwc3/dwc3-st.c:
> ret = of_platform_populate(node, NULL, NULL, dev);
> drivers/usb/musb/musb_am335x.c:
> ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
This still requires a small, separate driver to setup the regmap and
do of_platform_populate(). The only difference is it lives in
drivers/usb/ instead of drivers/mfd/.
> Or use the "simple-mfd", which is currently in -next:
>
> git show next/master:Documentation/devicetree/bindings/mfd/mfd.txt
I'm not too opposed to this, but Thierry was when I brought this up
before. The issue here is that if we ever have to do something
besides setting up a regmap in the MFD, we'd have to change the
binding and break DT backwards-compatibility.
Thanks,
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
