On Mon, 04 May 2015, Andrew Bresticker wrote:
> Add a binding document for the XUSB host complex on NVIDIA Tegra124
> and later SoCs. The XUSB host complex includes a mailbox for
> communication with the XUSB micro-controller and an xHCI host-controller.
>
> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
> Changes from v7:
> - Move non-shared resources into child nodes.
> New for v7.
> ---
> .../bindings/mfd/nvidia,tegra124-xusb.txt | 37 ++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> new file mode 100644
> index 0000000..bc50110
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> @@ -0,0 +1,37 @@
> +NVIDIA Tegra XUSB host copmlex
> +==============================
> +
> +The XUSB host complex on Tegra124 and later SoCs contains an xHCI host
> +controller and a mailbox for communication with the XUSB micro-controller.
> +
> +Required properties:
> +--------------------
> + - compatible: For Tegra124, must contain "nvidia,tegra124-xusb".
> + Otherwise, must contain '"nvidia,<chip>-xusb", "nvidia,tegra124-xusb"'
> + where <chip> is tegra132.
> + - reg: Must contain the base and length of the XUSB FPCI registers.
> + - ranges: Bus address mapping for the XUSB block. Can be empty since the
> + mapping is 1:1.
> + - #address-cells: Must be 2.
> + - #size-cells: Must be 2.
> +
> +Example:
> +--------
> + usb@0,70098000 {
> + compatible = "nvidia,tegra124-xusb";
> + reg = <0x0 0x70098000 0x0 0x1000>;
> + ranges;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + usb-host@0,70090000 {
> + compatible = "nvidia,tegra124-xhci";
> + ...
> + };
> +
> + mailbox {
> + compatible = "nvidia,tegra124-xusb-mbox";
> + ...
> + };
This doesn't appear to be a proper MFD. I would have the USB and
Mailbox devices probe seperately and use a phandle to point the USB
device to its Mailbox.
usb@xyz {
mboxes = <&xusb-mailbox, [chan]>;
};
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
